Marine Navigation & Instruments

LiveScope™ Bulkhead Connector KitFlush-mount the LiveScope™ extension cable so users can quickly connect and disconnect the LiveScope™ transducer. The kit includes a snap-on base, cover, weatherproof cap, and all mounting components.Compatible Devices: LiveScope™ Plus LVS34 LiveScope™ Plus System LiveScope™ System LiveScope™ XR LVS62 LiveScope™ XR System

Read more less

NMEA 2000® Backbone/Drop Cables (Right Angle) - 1'Extend your NMEA 2000 backbone with our 1 foot (0.3 m) or 6 foot (1.82 m) right angle backbone cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 0.3m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 1"H x 4"W x 6"L WT: 0.3 lbs UPC: 753759138264

Read more less

PG700 Integrated Heading Sensor, NMEA2000The PG-700 is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading. These sophisticated components are contained within a rugged, compact case. Unique design elements make the PG-700 virtually maintenance-free and easy to install. The PG-700 heading sensor detects terrestrial magnetism and produces compass data that can be utilized in CAN bus network.Features: Angular velocity sensor and magnetic bearing sensor incorporated Automatic determination of installation site suitability L-shaped mounting base for mounting on bulkhead Output of magnetic bearing data to FURUNO CAN bus device This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Quantum™ Data Cable - White - 15M15M Cable specifically for Raymarine's Quantum™ Radome with Wi-Fi and Ethernet. Specifications: Type: Cables Box Dimensions: 2"H x 9"W x 11"L WT: 1.4 lbs UPC: 723193793411

Read more less

SAE 5-Bolt Pattern Focus Tube w/Dead Band EliminatorFocus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2" above the top of the tank, allowing accurate level measurement with fluid levels all the way to the top of the tank, and eliminating the 2" deadband of the TLM100/TLM150.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

The TLM100 is used to sense levels of liquid tanks using ultrasonic technology and transmit the liquid levels over the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM250. The TLM100 is capable of sensing tanks up to 40" (1.02m) in depth. It can be used for diesel, fresh water, grey water, black water, and oil tanks. Unlike most tank senders that only work with rectangular tanks, the TLM100 can be calibrated for irregular tank shapes so you know the true level of your tanks. The TLM100 can be mounted on tanks with a SAE J1810 5-hole mounting pattern, or to tanks using 1.5" NPT or 1.25" BSP threaded openings via available adapters. The TLM100 has an optional airlock for black water applications to keep the face of the ultrasonic transmitter from fouling, and an optional focus tube to allow use on boats with planing hulls when the vessel spends a significant amount of time with the bow pitched up. Best of all, the TLM100 is NMEA 2000 certified so you can view any and all tank levels anywhere on the vessel using a compatible NMEA 2000 display. The TLM100 is a key component of Maretron's N2KView vessel monitoring and control system. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly Screw connector for positive connnection Termination resistors are used to terminate both ends of the trunk line Specifications: Data Interface: NMEA 2000 Connection Gender: Female NMEA 2000 Connectors: Terminators Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 873804002354

Read more less

EV-200 Sail Evolution AutopilotFeatures: Evolution Ai for superior performance No calibration required Use with any Type 1 Linear or Rotary Drive Unit (sold separately) 12V or 24V DC operation SeaTalkng Network Compatible ACU-200 auxiliary power to SeaTalkng network Includes p70s Autopilot Controller Includes: EV-1 Sensor Core p70s Autopilot Control Head ACU-200 Actuator Control Unit (Includes the M81105 Rotary Rudder Reference) Evolution Cabling Kit EV Unit O-Ring Pack (set of 2) Wall Mounting Bracket The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.Features: Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays p70s Autopilot Control HeadThe p70s is a push-button operation controller designed primarily for sailboats.Superior ViewingAdvanced LED backlighting offers low power consumption and delivers vibrant color and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions.Features: LightHouse user interface is simple and quick to use Wide 160° viewing angles Start up wizard helps you configure the pilot quickly and easily Anti-reflective coating for improved visibility in bright sunlight Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer Simple system and group dimming/illumination Support for multiple data sources SeaTalkng/NMEA2000 and SeaTalk1 connectivity (no bridging required) ACU-200 Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type.Supported Drive UnitsType 1 Linear or Rotary Drive Units (sold separately)Evolution Cabling Kit 1 x SeaTalkng Power Cable (0.4m) 1 x SeaTalkng Backbone Cable (5m) 1 x SeaTalkng Spur Cable (0.4m) 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connector 2 x SeaTalkng Terminator Specifications: Type: Parts Box Dimensions: 8"H x 17"W x 21"L WT: 13.1 lbs UPC: 723193774298 Quick Guide (pdf)Brochure (pdf)

Read more less

Quantum 2 Q24D Radar Doppler with 15M Power & Data CablesThe Raymarine Quantum 2 Radar has Doppler collision avoidance technology. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges.Using advanced Doppler processing, the system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas.Easily Identify Dangerous TargetsRaymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.Safer NavigationQuantum 2’s exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary).Superior Collision AvoidanceDoppler-enabled MARPA provides an effortless means of dangerous target tracking by eliminating the need to setup guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard.Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works: Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler Target ProcessingDoppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red Outbound targets are colored green Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels.Quantum 2 Safety SectorDoppler does an excellent job of bringing attention to moving targets, but it does downplay stationary targets, that can be equally as dangerous.Safety Sector provides equal attention to these imminent threats by coloring them as inbound targets. Potential targets include: Buoys Exposed Hazard (rocks, pilings, etc...) Slow moving, low visibility vessels Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m NOTE: The safety sector is not visible on the display. Quantum 2 automatically processes and highlights targets within this region in red.The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics.Quantum 2 also features Raymarine’s True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely.Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD.The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance. Specifications: Array Size (Inches): 18" Power - Output: 20w Box Dimensions: 12"H x 24"W x 24"L WT: 23.2 lbs UPC: 723193825525 Quick Guide (pdf)

Read more less

GC™ 245 Surface Mount Camera - BlackBRING VISION TO YOUR HELMNow there’s a high-resolution marine camera that takes the stress out of docking your boat. Enhance proximity awareness and confidence in close quarters with the GC 245 surface-mount camera. Distance markers specific to your boat1 and user defined guidance lines 1080p high-resolution output2 See camera feeds in fisheye or standard view; birdseye view also available1 Full integration on the Garmin marine network or Garmin Bluenet™ network Guidance LinesSet up your own guidance lines for more confidence avoiding obstacles in the marina.Distance MarkersUse distance markers calibrated to your vessel by the boatbuilder so you know how far away you are from objectsTwo Mounting OptionsInstallation is simple, and the camera can be mounted with the dome up or down.Three Camera ViewsGet the right perspective with FishEye and standard views with impressive low-light performance; GC 255 is also available with BirdsEye camera view1.Multiple Camera FeedsSee up to four camera feeds simultaneously on your compatible MFD; watch the video on networked chartplotters, or set it up on a custom combo page.See What You WantTake a closer look with digital zoom, or get a different perspective with digital pan.In The Box: GC 245 surface mount camera GVA 10 with integrated power and network cables Network adapter cable (500 mm) Video coaxial cable (8 m) Mounting hardware Documentation Specifications: Unit dimensions: 2.4” x 2.4” x 2.2” (6.1 x 6.1 x 5.1 cm) Weight: 3.25 oz (92 g) Hardwire power: 12V/24V Operating current: 300 mA at 12VDC; 200 mA at 24VDC Power consumption: 4.5 W Connection to chartplotter: IP Versatile mounting options: yes (ball-up or ball-down) Rugged housing: yes Setup: plug-and-play Water rating: IPX7 Video resolution: 1920 x 1080 pixels2 Video output: H.264 over GMN and BlueNet™ Images: Standard and reverse Selectable views: FishEye, standard, BirdsEye (OEM calibrated) Augmented reality features: Distance markers (OEM calibrated) and guidance lines (user setup) Viewing angle (H/V): 160°H/90°V Operating temperature: -20°C to +60°C Scanning system: progressive scan Day/night operation: RGB mode full-time 1Professional calibration required21080p resolution available on select chartplotters onlyEngineering enhancements are ongoing and may not be reflected in the pictures, videos and specifications.

Read more less

Right Angle RayNet to RayNet - 10MFeatures: Raymarine's right angle RayNet to RayNet connections Length: 10M

Read more less

10M RayNet to RayNet Cable for e & c Series

Read more less