Marine Navigation & Instruments

Trolling Motor TransducerDescription: Trolling motor mount high definition side imaging transducer with built in temperatureFor Use With: 997CWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: Yes Speed Included: No Mounting Style: Trolling Motor Imagining: Standard/Side Chirp: No Cable Length (Feet): 15' Box Dimensions: 4"H x 8"W x 9"L WT: 1.75 lbs UPC: 082324507540 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Maretron Mid Double-Ended Cordset - 0.5 M BlueMechanical:Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59"Electrical Current Rating: 4.0 Amps Voltage Rating: 250 VCable Outer Jacket Mat/Color: PVC/Gray Conductor Insulation Material: PE (data pair), PVC (power pair) Number of Conductors: 2x16 (1.29mm) AWG, Data 2x20 (0.81mm) AWG, 20 (0.81mm) AWG Drain Wire Shielding (3 Levels): Foil (Overall), Foil (Power Pair), Foil (Data Pair)ENVIRONMENTAL Protection Class: IEC IP68, NEMA 1,3,4,6P Temperature Rating: -40 deg C to 80 deg C to (-40 deg F to 176 deg F)APPROVALS (Cable) UL: PLTC 75 deg C Sunlight Resistant E90625, AWM 80 deg C 300V (Cable) CSA: CMX-OUTDOOR-CMG LL54185 75 deg C, AWM I/II A/B 80 deg C 300V FT4 NMEA: NMEA 2000 Approved IEC: IEC 61162-3 Specifications: Cable Length (Feet): 2' Box Dimensions: 1"H x 5"W x 6"L WT: 0.2 lbs UPC: 873804001890

Read more less

Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures: 10-Pin For High or Medium Frequency CHIRP Transducers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Adapters Box Dimensions: 1"H x 7"W x 8"L WT: 0.15 lbs UPC: 801769003390

Read more less

B175H Bronze Thru Hull 20° Tilt - 1kWRequires Mix and Match CableRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer delivers up to 80 kHz of total bandwidth in just one installation, saving customers time and money.Features: High—CHIRPS from 130 kHz to 210 kHz, 15° to 9° beamwidth 20° tilted version, 1KW 80 kHz of total bandwidth from one transducer Depth & fast-response water-temperature sensor Bronze transducer housing Boat Size: Up to 11 m (36’) Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Thru-Hull Chirp: High Box Dimensions: 8"H x 10"W x 12"L WT: 10.65 lbs UPC: 801769001921

Read more less

B175HW Bronze Thru Hull 20° Tilt - 1kWRequires Mix and Match CableGet more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducersA unique property of the new high frequency transducers is that the beam width is a constant 25° angle across the entire frequency band. Now, in addition to providing vast bottom coverage and precise fish detection in the upper water column that can sometimes go unseen with our narrow beam transducers, Airmar's new wide beam format also creates crisper and larger return images on the display. We've got you covered.Features: Depth & fast-response water-temperature sensor 20 degree tilted version, 1KW High—CHIRPS from 150 kHz to 250 kHz 25° constant beamwidth 100 kHz of total bandwidth from one transducer Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth Boat Size: 8 m (25’) and above Hull Type: Fiberglass or wood Exclusive Xducer ID® technology This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chirp: High Wide Mounting Style: Thru-Hull Box Dimensions: 8"H x 11"W x 12"L WT: 10.6 lbs UPC: 801769002089

Read more less

10M Power & Analog Video Cable for NightwavePower and analog video replacement cable for Nightwave. An official SIONYX accessory, this cable is 10 meters (32.8 feet).

Read more less

Bilge Sentry Extension Cable - 6MExtension for the Water ModuleThe water module comes with a 1.5-meter cable connected directly to the sensor. If that cable cannot reach the bilge, then users will need this extension cable.This extension cable has 5 pins and is 6 meters in length. The system supports extension with up to two extension cables (12m max).Specifications:Length: 6 meters Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 9"L WT: 0.6 lbs UPC: 7090051250083

Read more less

B275LHW Bronze Thru-Hull CHIRP Transducer - 12-PinBronze, Thru-Hull CHIRP Transducer with Temp, with 12-Pin Connector, Low-Freq: 42-65 kHz, High-Freq: 150-250 kHz.The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the B275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the B275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.The B275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Pins: 12 Speed Included: No Temperature: Yes Chirp: Low/High Wide Imagining: Standard Mounting Style: Thru-Hull Box Dimensions: 7"H x 19"W x 26"L WT: 25 lbs UPC: 6116793889952

Read more less

9 M SIDB Y - 9-Pin Side Imaging Dual Beam Splitter CableY Cable - Side Imaging and Dual Beam - allows you to use two transducers on one unit without the use of a transducer switch. For use with Side Imaging products only, in conjunction with a dual beam transducer only.  For improved high speed performance for bottom tracking. 30" length.Supports MEGA Side Imaging.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 2"H x 8"W x 9"L WT: 0.4 lbs UPC: 082324052354

Read more less

NMEA 2000® Backbone/Drop Cable - 12' (4M) - *Case of 5*Extend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone/drop cable.Compatible Devices: AIS™ 300/600 Blackbox Transceiver GBT™ 10 GCL™ 20 Low-light Imaging Camera GDL™ 40 GET™ 10 GFL™ 10 GFS™ 10 GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™ GHP™ 20 Marine Autopilot System with SmartPump GMI™ 10/20 Marine Instrument GPS 19x NMEA 2000® GPSMAP® Series VHF 200/300 Marine Radio VHF 300 AIS WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 13' Data Interface: NMEA 2000 Box Dimensions: 1"H x 5"W x 6"L WT: 2 lbs

Read more less

Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The SeaTalk to SeaTalkng Starter Kit is the perfect way to get started with your SeaTalkng compatible Raymarine product. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable. What's in the kit?A06064: SeaTalkng 5-way ConnectorA06031: SeaTalkng Backbone Terminator (x2)A06040: SeaTalkng Spur Cable 3MA06049: SeaTalkng Power Cable

Read more less

Kayaker Tie DownDesigned for Mounting the Ritchie Kayaker XP-99 (compass not supplied)Features: No Drilling, No Holes in Deck Flexible Pad and Foam Ring Easily Conforms to Deck Shape Won't Scratch Finishes Attaches with Bungee Cord and Clips (included)

Read more less