Marine Navigation & Instruments

NMEA 2000 Dual Device Starter KitAncor's NMEA 2000 Starter Kits include all components needed to create a dual device NMEA 2000 network. 1 meter power cable with tee, item# 270000 Male and female terminators (1 each), item# 270105 and 270106 One dual tee connector, item# 270103 Two 2 meter drop cables, item# 270302 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Starter Kits Box Dimensions: 3"H x 5"W x 8"L WT: 1 lbs UPC: 091887982398 Brochure (pdf)

Read more less

Interface Box for MFD Integration - IrisControl App for Garmin, Raymarine, Simrad & FurunoThe CMAC-INT003 is a small and compact interface box that sits in line between your MFD and Camera to provide full control and converts the video to high-definition HDMI.The perfect solution for smaller vessels such as center console boats, fishing boats, RIBs, vehicles, or any application where perhaps a single IP PTZ camera (such as our A418, A295, or A395 models) is installed, the CMAC-INT003 interface converts the cameras IP stream to high definition HDMI video whilst also hosting our IrisControl App for HTML5 platforms such as Garmin’s OneHelm, Raymarine LightHouse Apps, Simrad / B & G Apps and Furuno TZT Apps. Plug your camera into the INT003, hook up to your MFD’s network and HDMI input, and seamlessly control your camera from the MFD.For chartplotters that support our IP camera's video stream directly, as well as hosting our IrisControl App, the CMAC-INT003 converts control data from the App to RS485 serial data to drive the camera.For chartplotters that do not support the cameras video stream directly or do not feature HDMI video inputs, simply combine the CMACINT003 with our HDMI2IP encoder to view your device (compatible with Raymarine, Simrad, B & G, and Furuno).Features: Converts IP Video Stream to HDMI Video Hosts IrisControl App for Control via Chart Plotter Provides RS485 Serial Data to PTZ Cameras Designed to Interface IP Cameras with Chart Plotters such as Garmin, Raymarine, Simrad, B & G, and Furuno Supported PTZ Cameras - Iris ATOM-A418, A295, A395, AX295, AX395, AX1280HD USB Touch - Compatible with Garmin 8xxx / 9xxx series MFDs Upload Unlimited Deck Plans to IrisControl App Drag and Drop Configuration Plug & Play Installation Small & Compact Form Factor Technical Specifications: System Processor - Novatek NT98323 Video Codec - H.264, H.264+, H.265 Network Camera Capacity - Up to 32 Cameras via Camera Network RJ45 10/100 Connection Network Camera Resolution - Up to 4k Max Video Output - 1 x HDMI High Definition Serial Data Port - RS485 Serial Data / PTZ Control (Pelco D - Iris Variant) Power - +12VDC 24VDC / During Boot-up Peak at 1.5A, 400mA Nominal Operating Temperature - -10 - 55°C (14 - 131°F) Chartplotter Compatibility: Garmin 7xxx: Requires HDMI to CVBS Converter (USB Touch not available) Garmin 8xxx & 9xxx - All Features NVR Version Compatible with MFDs via HDMI/CVBS port and used in conjunction with IRIS595, IRIS599, or TE01 Control interface IrisControl for Garmin OneHelm, Raymarine LightHouse Apps, Furuno Apps, and Navico Apps NSO = HDMI NSS = Iris HDMI to IP Encoder or HDMI to CVBS Converter This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

White Replacement Bottom Housing Section for NightwaveReplacement bottom housing section (Housing Only). Available in multiple colors, including white, black, and grey. This is a SIONYX official accessory.

Read more less

Honda 5, 8, 9.9. 15 (1980-2000)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

NMEA 2000 Power Isolator Ancor's NMEA 2000 Power Isolator can be used for isolating power between 2 independent NMEA 2000 networks. Reduce battery current draw by powering one bus off while the other remains operational, or can be used to assist with voltage drop issues on long networks. The yellow couplers connect to the corresponding Ancor backbone cables and tees creating a simplified, color coded network installation. Color coded for easy installation and component identification Compatable with all NMEA 2000 micro devices WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 NMEA 2000 Connectors: Power Isolators Box Dimensions: 2"H x 3"W x 5"L WT: 0.06 lbs UPC: 091887990713 Brochure (pdf)

Read more less

Mercury 15, 20 Remote Shift/Throttle & Tiller (2011-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Spacer Kit for Type T System - 0.51"Features: 13mm (0.51") Spacer Kit Use with 90° bezel Specifically for Type T System Specifications: Type: Parts Box Dimensions: 1"H x 5"W x 5"L WT: 1 lbs UPC: 628309133788

Read more less

Chesapeake White SS 4" Tachometer with Hourmeter (4000 RPM) (Diesel) Mech. Takeoff & Var. Ratio AltPerimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life 12 VDC negative ground Can be adapted for 24 VDC systems Scale - 0 to 10000 Hours Factory P/N TD9108*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer - Diesel Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Series: Chesapeake White Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266338340

Read more less

4.1" High Bright Color Display - BlackMaretron’s DSM410 is a 4.1” high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM410 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad. In addition to the monitoring and display capabilities, the DSM410 features an alert/alarm package and electrical switching capability.Unlike traditional single-display units, DSM410 users can choose numeric, gauge, bar or graph formats in single or multiple displays, with cycling options possible for a wide range of favorite data. These multiple display options conserve mounting space and reduce overall system cost.The DSM410 will directly connect with any NMEA 2000® network and with the exception of AIS data will display any or all information captured throughout the vessel. Various audio and visual alarms are also programmable.The DSM410 displays a multitude of information including AC power, anchor status, battery, depth, electrical distribution, engine, environment, fuel management, GPS, heading, navigation, pressure/vacuum, rudder, speed, status indicators, tanks, temperature, time, transmission, water makers, weather, wind and more.The DSM410 includes a comprehensive, flexible alert capability. Configure audio and visual alerts on virtually any data that the DSM410 is capable of monitoring. Available alert types include: High alert Low alert Data unavailable alert On alert Off alert Circuit breaker tripped alert Course alert GPS quality alert Outside radius alert Inside radius alert Direction alert Timer alert The DSM410 is capable of sharing alert information with other DSM410 units as well as any DSM150, DSM250 and N2KView® installations on the network. An alert defined on any device can be acknowledged on any other device on the network.Maretron's DSM410 is engineered and manufactured to the highest standards (IEC 60945 Maritime Navigation and Radiocommunication Equipment). Its compact waterproof housing will provide years of reliable performance.Examples of data that the DSM410 can display are: AC power (Average Frequency, Voltage and Current, Phase-Neutral Frequency, Voltage and Current, Phase-Phase Frequency, Voltage and Current Anchor Watch Battery / DC (Voltage, Current, Battery Temperature, Battery State of Charge, Battery Time Remaining, Ripple Voltage, Power) Depth (Water Depth, Depth below Transducer) Electrical (Resistance) Electrical Distribution (Switch/Breaker, Breaker Current, On/Off/Error Counters, On/Off/Error Timers) Engine Monitor (Boost Pressure, Hours, Coolant Pressure, Coolant Temperature, Exhaust Gas Temperature, Fuel Pressure, Fuel Rate, Oil Pressure, Oil Temperature, Tachometer, Tilt/Trim, Voltage, Fuel Econmony, Fuel Consumption, Percent Load, Percent Torque, Trip Fuel Used, Warning Indicators) Environment (Barometer, Heat Index, Humidity, Temperatures, Wind Chill) Fluid Flow (Flow Rate, Trip Volume) Fuel management (Distance to Empty, Time to Empty, Total Fuel Capacity, Total Fuel Level, Total Fuel Consumption, Total Trip Fuel Used, Total Fuel Economy, Total Fuel Remaining) GPS (COG, Lat/Lon, SOG, Satellites, Time, Accuracy) Heading (Heading, Rate of Turn, Variation) Humidity (Inside, Outside, User Defined Indicators (Status, , On/Off/Error Counters, On/Off/Error Timers) Mechanical (dB, Force, Strain) Motion (Acceleration, Angle, Angular Velocity, Angular Acceleration, Distance, Rotation Rate, Velocity) Navigation (BOD, BTW, COG, XTE, DTW, ETA, Lat/Long, Rolling Road, Set/Drift, SOG, TTG, VWG, Waypoint Number and Name) Pressure / Vacuum Rudder SMS (Status, Signal Strength) Speed (Through Water, Over Ground, Total Log, Trip Log) Tanks (Capacity, Level, Remaining) Time (Local, UTC, Moon Phase, Sunrise, Sunset, Twilight) Transmission (Gear, Oil Pressure, Oil Temperature, Warning Indicators) Vessel (Heave, Pitch, Roll, Trim Tabs, Keel) Watermaker (Sea Recovery Status display) Wind (Apparent direction and speed, True direction and speed, Groud direction and speed) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Instrument Function: Multifunction Box Dimensions: 4"H x 6"W x 7"L WT: 1 lbs UPC: 873804003757 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 80-Degree HFOV - 3.6mm LensIris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application.The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via our CMAC series of switchers, interfaces, and recorders.The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation. It is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings.The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts.Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions.Whether you need a high-quality and rugged camera for your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution.Features: Marine Grade 316 Stainless Steel rugged corrosion-free case Compatible with Raymarine / Axiom chart plotters running LH2 and higher Compatible with Simrad, Lowrance & B & G Compatible with Furuno software running TZ4.1 and above Garmin Compatibility in conjunction with CMAC Systems High polish finish Built-in infra-red LED illumination (10m Range) PoE & 12VDC connections Deficient power consumption IP66 environmental protection Specifications: Lens (millimeter): 3.6mm Horizontal Field of View: 80-degree HFOV Sensor (inch): 1/4” CMOS Sensor Resolution: Variable - 1920x1080P (2MP) max Interface: RJ45 10/100 base t ethernet Video Processing: H.264 Codec / dual stream Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF Onvif: Profile S v2.4 Bitrate: VBR / CBR 32kbps 8Mbps Illumination: 6 x 850nm infra-red - 10-meter range Lens/Field of View: 1.8mm wide angle option Mirroring: Horizontal & vertical - configure via browser Automatic Gain Control: Supported / multiple levels Compatibility:  Raymarine / Axiom (LH2 or higher), NAVICO MFD’s inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems Operating Temperature: -30 +60-degrees C Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket Material: 316 Stainless Steel Power: PoE IEEE802.3af / 12VDC <200mA max. Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H Environmental: IP66 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

MR1010RII 4kW Marine Radar Color LCDSimplified ARPA (Automatic Radar Plotting Aids) Function*The simplified ARPA function helps to prevent a collision risk with other vessels or objects. Up to five targets can be automatically tracked on the radar echo, when a target enters within the set watch area, (or up to ten targets can be tracked when manually set). By selecting one of the targets, the target information such as position, course, speed, CPA, TCPA, bearing, and distance is shown on the lower side of the display. When the target enters within the CPA and TCPA limits, an alarm message is displayed with a beep alarm.* External bearing, speed, and position data required.DSC (Digital Selective Calling) Information Function*When connected to a DSC radio and a DSC call is received, the received message is transferred to the MR-1010RII. Up to 20 DSC messages can be plotted on the radar echo. If a MOB position information is transmitted from a DSC handheld transceiver (including Icom IC-M94D), the MR-1010RII can show the MOB waypoint on the radar echo to assist in search and rescue operation.* External bearing, position, and DSC data required.AIS (Automatic Identification System) Overlay Function*When connected to an external AIS device (including Icom IC-M605, IC-M510 AIS, and, IC-M506 AIS), up to 100 AIS target icons are overlaid on the radar echo. By selecting an AIS icon, vessel information such as AIS class, MMSI number, vessel name, course, speed, CPA, TCPA, bearing, and distance are shown on the lower side of the display.* External bearing, position, and DSC data required.Wide Viewing Angle Color TFT LCDThe wide viewing angle color TFT LCD offers bright, vivid echoes with 16-step gradient intensity. The screen intensity and screen color (day, night, and user settings) can be instantly adjusted with the "BRILL" button. In addition, the auto-hide information function enlarges radar echoes to full size.Multi-Lingual Intuitive User InterfaceThe language setting of the MR-1010RII is selectable from multiple languages.* The large eight-direction cursor key provides smooth operation even when wearing gloves. Various settings can be configured through the visually intuitive operation.* EXP version: English, Indonesian, Korean, Portuguese, Spanish, Thai, and Vietnamese/EUR version: Arabic, English, French, Italian, Portuguese, Spanish, and TurkishOptional Video Output UnitWith an optional video output unit, UX-252*, the MR-1010RII can be connected to an external display. The same radar echoes can be observed on the main unit and external display at the same time. *Except for the EUR version.TLL (Target Latitude Longitude) Function*The MR-1010RII can mark points with icons and transfer the position data with NMEA TLL sentences to other NMEA 0183 devices such as an external plotter.* External bearing and position data required.True Trail Function*The true trail function cancels its ship movement and shows true moving objects with trails, while static objects are not trailed.* External bearing and position data required.Features: 10.2–42 V wide DC input to prevent over-voltage damage Two-user programmable alarm zones Waypoint indication* Designed, engineered, and Made in Japan *External bearing, position, and waypoint data required.Specifications: Display Type: 10.4-inch Color TFT LCD Resolution: 480 × 640 dots Minimum range: 25 m; 82 ft (at 1⁄8 NM range) Maximum range: 36 NM Range scales     NM: 1⁄8, 1⁄4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4, & 6, 8, 12, 16, 24, 32, 36 km: 1⁄4, 1⁄2, 3⁄4, 1, 1.5, 2, 3, 4, & 6, 8, 12, 16, 24, 32, 36, 48 Preheat time: 90 seconds Power supply: 0.2–42 V DC Power consumption (at zero wind velocity): 55 W (approximately) Usable temperature range: −15°C to +55°C; +5°F to +131°F Input data format: NMEA 0183, N+1, AUX, IEC61162-2 Output data format: NMEA 0183

Read more less

52MM (2-1/16") OceanLink Coolant Temperature Gauge (250°F) - Black Dial & BezelOceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  Interchangeable bezel option. Features: AMP Superseal Easylink 270° pointer deflection angle Reverse polarity protection Anti-fog double lens Front & rear protection rating IPX5 Operating temperature range -20 °C / +70 °C Nominal voltage - 12/24V Hole diameter - 52MM In the Box: Gauge Bezel Rubber Seal Spinlock Installation Instructions Safety Instructions *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Water Temperature Voltage - Input Range (Volts): 12/24 V Gauge Size: 2-1/16" Box Set: No Series: OceanLink Box Dimensions: 4"H x 5"W x 6"L WT: 0.35 lbs UPC: 7640178721081

Read more less