Marine Navigation & Instruments

CVS-128 Digital Echo SounderFeatures a digital signal processor for a clearer high-definition image that enhances fish targets in shallow and deep depths. Brilliant 8.4" color LCD daylight viewable display with 8, 16 or 64 color levels, Dual-frequency 50/200 kHz operation, 1000 Watts with 8 ranges from 0-3600' and exclusive Sona-Tone identifies what's under boat with different sounds for fish or schools of fish.Features: Stores up to 10 screen images in built-in memory for recall later. High-speed pulse rate transmission of 5000 times per minute for enhanced shallow water detection. Easy operation RGB output Auto fishing/cruising modes Audio/visual alarms Fishing hot spot function leads you back to your favorite fishing hot spots with input from GPS Bottom discrimination mode Real-time multi-color A-scope Built-in simulator Lat/Lon position with input from optional sensor Displays boat speed / surface water temp with Optional transducer IPX5 waterproof rating Over-head mounting and built-in flush mounting What's in the box: Display Unit with hard cover Mounting Bracket DC Power Cable Fuses Operation Manual Specifications: Screen Size: 8.4" Transducer Type: Not Included Transducer Included: No Box Dimensions: 8"H x 11"W x 14"L WT: 10.85 lbs UPC: 010407320748 Owner's Manual (pdf)

Read more less

NMEA 2000 T-Connector - 1-Way Extension BlockAs the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use one of these single T-pieces to add devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. The lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).Features: NMEA 2000 Single T-Piece Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating of IP68 Quick Guide (pdf)

Read more less

WND100 Mast Head Unit & 20M CableWind Transducers have a tough life, experiencing extreme weather, constant movement and the occassional seagull, so it is no surprise that they can often fail. With this in mind, the WND100 wind sensor features an ultra tough design with UV and salt resistant plastics, Igildur™ bearings for exceptional life and corrosion resistance. Data transmission is via a super-thin 20m digital cable providing fast update NMEA0183 data for maximum compatibility with legacy instrument systems and multi-function displays.Features: Ultra tough Mast Head Unit Igildur™ bearings for exceptional life and corrosion resistance UV, Salt water and high impact resistant plastics 12/24v DC operation with minimal power consumption Super thin 20m Mast Head cable Industry standard NMEA0183 Output for maximum compatibility Output at 5Hz (configurable)

Read more less

Power Pole Move Mega 360 Dual MountWith this bracket, users can attach a FORESIGHT Mount and a Humminbird Mega 360 unit to a Power Pole Move with a single bracket. Both ends of the bracket have a pivot joint for ultimate versatility in how the units sit in relation to the trolling motor.Specifications: Weight: 4 lbs. Dimensions: 14 x 10 x 6 inches

Read more less

Lowrance Ghost Mega 360 Dual BracketWith this bracket, users can attach a FORESIGHT Mount and a Humminbird Mega 360 unit to a Lowrance Ghost trolling motor with a single bracket. Both ends of the bracket have a pivot joint for ultimate versatility in how the units sit in relation to the trolling motor.Specifications: Weight: 4 lbs. Dimensions: 14 x 10 x 6 inches

Read more less

Garmin Force Mega 360 Dual BracketWith this bracket, users can attach a FORESIGHT Mount and a Humminbird Mega 360 unit to a Garmin Force trolling motor with a single bracket. Both ends of the bracket have a pivot joint for ultimate versatility in how the units sit in relation to the trolling motor.Specifications: Weight: 4 lbs. Dimensions: 14 x 10 x 6 inches

Read more less

SPL1500 Antenna Splitter VHF/AISAn AIS receiver or transponder requires a VHF antenna, but Digital Yacht’s SPL1500 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC). Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices.The unit has three simple connections - one input for the main VHF antenna and then outputs for the AIS receiver/transponder and another for the DSC VHF. It utilizes Digital Yacht’s ZeroLoss™ technology, to ensure the very best possible reception and transmission from all devices. Most importantly it is also fail safe, so should the unit ever stop working or lose power, it will not affect the main VHF operation. Until now, Digital Yacht, have recommended a dedicated antenna for a receiver or transponder.  However, with the new this new ZeroLoss™ technology, we can now offer a solution that greatly simplifies installation whilst maintaining performance.The unit is waterproof and matches the aesthetics of the current AIT1500, so can easily be integrated into any vessel. It is suitable for operation on 12V or 24V systems and features three status LEDs that show the unit is powered correctly and when the AIS or VHF transmits.Features:  Enables an existing VHF antenna to be used for both the standard VHF and AIS system ZeroLoss™ technology for exceptional performance Works with all Class B transponders and receivers Supplied with power cable, PL259-PL259 cable assembly and BNC-BNC cable assembly for easy installation (all cables 0.75m long) 12V or 24V 0peration and low power consumption Fail safe operation Same size and design as the AIT1500 Makes installation of an AIS receiver or transponder very quick and simple Saves on additional antenna clutter

Read more less

Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Resolution Analogue Sensor - 1000TVL - 4 in 1 Video FormatThe IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements.The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirements. In analog mode (default), the camera will be connected directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders, and you will achieve 1080P high-definition video in real time, compatible with MFDs that feature digital (HDMI / DVI) inputs.The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection.The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel with a high polish (standard).  A surface mount bracket is also available for the camera (Part Number: BRK106) facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device.Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera.Features: Marine Grade 316 Stainless Case The smallest PTZ dome available (86 mm) Analog Huge compatibility Easy installation & low power Stylish high-polished finish Fast, responsive pan, tilt, and zoom operation Specifications: Lens (millimeter): F1.8 / F=4.9mm 49mm Image Sensor (inch): 1/3” Panasonic CMOS Image Processing: Composite Effective Pixels: 1944(H) x 1092(V) Approx 2.12M Pixels Resolution: 1000TVL Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W) Illumination: NA IR Distance: NA Day / Night: Auto / Day / Night S/N Ratio: >48dB  Optical Zoom: 10x Digital Zoom: 10x Wide Dynamic Range: Off / Low / Middle / High (WDR SNR 120dB) BLC: Off / BLC 3D DNR: Off / Low / Middle / High  Mirroring: Horizontal Flip / Vertical Flip AGC: 0-32 Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec Tilt Details: 0 90-degree / Speed 0.5300-degree sec Network: NA Protocol: PELCO-D / RS485 serial data Power over Ethernet: NA P2P: NA Smart Phone: NA Compatibility: All MFDs with Composite Video Input Max Users: NA Power: +/-12VDC Power Consumption: 0.8A Max Operating Temperature: -20-degree C + 60-degree C Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm Ingress Protection: IP66 Weight: 1.1Kg Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing Brochure (pdf)

Read more less

GM H7R2 Gimbal Mount for HELIX 7 G4N ModelsThe GM H7 is a gimbal mount for HELIX 7 G4N products. This includes the gimbal mount, knobs, and mounting hardware. Features: Compatible with: HELIX 7 G4N models Includes gimbal mount, knobs, and mounting hardware 1-Year Limited Warranty Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 7"W x 12"L WT: 0.8 lbs UPC: 082324056451

Read more less

CPT-S In-Hull CHIRP TransducerThe CPT-S In-hull transducer provides a simple-to-install depth only transducer solution for non-cored fiberglass hulls. Ideal for sailing, cruising, and small powerboat applications, the CPTS-S In-hull transducer supports CHIRP sonar operation centered on 200kHz. The CPT-S in-hull directly connects to Element S series units.Will connect to Axiom RV/Axiom Pro RVX and Element HV using the A80490 (Axiom) or A80559 (Element HV) adapters. An innovative transducer tube housing design allows the CPT-S In-Hull to mount in hulls ranging from 0 to 25 degrees deadrise. Specifications: Chirp: High Speed Included: No Mounting Style: In-Hull Imagining: Standard Temperature: No Box Dimensions: 4"H x 7"W x 12"L WT: 1.3 lbs UPC: 723193840610

Read more less

9-M360-2-DDI-Y - MEGA 360 & 2D/MDI 7-Pin Y-CableThis Y cable allows for the connection a MEGA 360 Imaging transducer and an external 7-pin HW / MDI+ transducer to the same compatible HELIX fish finder.  Combines MEGA 360 Imaging transducer and 7-pin Dual Spectrum/MEGA Imaging+ transducers into one 7-pin transducer plug for connection to the same, compatible HELIX fish finder. For use when connecting a MEGA 360 Imaging transducer to a HELIX fish finder, in conjunction with an external 7-pin HW / MDI+ transducer. This cable should not be use to connect a HELIX fish finder with both MEGA 360 Imaging and Built-In MEGA Imaging on Minn Kota trolling motors. Please refer to #720108-1 14 M360 2DDI Y for this specific rigging need. Is not compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors 30" (76 cm) cable on Dual Sprectrum CHIRP side of cable 10' (3 m) cable on the MEGA 360 side 1-Year Limited Warranty Specifications: Type: Adapters Box Dimensions: 3"H x 7"W x 9"L WT: 0.8 lbs UPC: 082324054853

Read more less

Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single Band Mix and Match CHIRP transducers up to 1kW (1,000 watt).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less