Marine Navigation & Instruments

165T/275LHW-12P Pocket Mount Combo Transducer for DFF3D & TZT3 DisplaysPocket Mount Combination TransducerThis is a new size housing (12 LX 5 W X 3.5 H) that contains DFF3D elements along with CHIRP elements.Standard Features DFF3D operating frequency 165 kHz Low—CHIRPS from 42 kHz to 65 kHz, Beamwidth 25° to 16° High—CHIRPS from 150 kHz to 250 kHz, Beamwidth 25° 12M Cables Recommended for a TZT3 and DFF3D installation Built-in motion sensor Built in temp sensor This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Euro Black 4" Speedometer (30 Knot) (Pitot)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Pitot tube type speedometers operate by pressure from the water being forced into the pitot tube. This pressure is then transmitted through flexible tubing to the bourdon tube movement inside the speedometer head where it is converted into a speed reading by the movement mechanism.∗Pitot tube sold separately.4" Gauge - Hole size: 3.4" (86.36 mm)Features: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Dual Scale - Imperial and Metric Factory P/N SE9659*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: Euro Black Gauge Type: Speedometer Gauge Size: 4" Box Set: No Box Dimensions: 4"H x 4"W x 4"L WT: 1.1 lbs UPC: 759266328099

Read more less

Johnson Evenrude Suzuki 9.9, 15 (2003-Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Mercury 5 & 6 (All Years) & Nissan/Tohatsu 5 & 6 (1995 - Present)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Suncover for Axiom 9 when used with the Front Mounted kit A80500 Features: Rugged suncover protects your Axiom 9 from the elements Fits Axiom 9 models when fused with the front mounted kit A80500 Sleek design looks great on your boat NOT FOR USE WITH AXIOM PRO 9 Specifications: Type: Covers Box Dimensions: 1"H x 7"W x 11"L WT: 0.55 lbs UPC: 723193818480

Read more less

Sealing Kit for Water Capacitive SensorSealing Kit for Fresh Water Level Sensor.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Engine Oil Temperature Sensor - Single Pole, Common Ground - 50-150°C/120-300°F - 6/24V - M14 x 1.5 ThreadFeatures: Single Pole, Common Ground 50-150°C/120-300°F 6/24V M14 x 1.5 Thread This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Bus Cable - 10M for AcquaLink® GaugesVDO Marine Bus Cable - 10M.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

32-Pin Power Cable Single Engine Set-Up - .5M32-pin power cable for single engine.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Deep-Pipe Level Sender - 160mm - 240 to 33 OHMDeep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. Features: Tubular Sensor Stainless Steel Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water Length: 160 mm Technical Specifications: TE Superseal Connector 2-Pole IP67 Operating Temp.: -25°C to 65°C or -13°F to 149°F Operating Voltage: 6 to 24 VDC Compensation chamber Flange: 5-Hole SAE Flange 54mm PA66 GF30 Wiring harness with length of 200 mm Signal ranges: 240 to 33 OHM IP67 protection rating Communication: Analog In the Box: Deep-Pipe Level Sensor Installation Kit Safety Instructions Installation Instructions *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 2"H x 4"W x 9"L WT: 1 lbs UPC: 7640178725799

Read more less

52 MM (2-1/16") AcquaLink Transmission Oil Pressure 30 Bar/440 PSI - Black Dial & BezelAcquaLink realizes state-of-the-art solutions to provide customers with instantaneous and accurate nautical information.  The instruments are designed for performance, with ease of use remaining an important attribute. The use of premium material - such as mineral glass lenses - guarantees the highest level of reliability and readability, as well as low energy consumption.Features: Maximum precision and the deployment of pioneering technologies are equally important as ease of use and stylish design. AcquaLink components are made of high class materials, like mineral glass, stainless steel and aluminum. All products are manufactured below ISO 9001 certified environment. Our plug and play solution design concept offers a high level of installation flexibility. A cross-platform standard offers maximum freedom in respect of cockpit customization. We ensure seamless integration and optimum utilization of AcquaLink devices for extreme conditions at sea. Harmonized dashboard look. Technical Specifications: Operating Range - +0 to +30 Bar /+0 to 400 PSI Input Signal -  EasyLink Nominal Voltage -12 / 24 V Color - Black/Aluminum  Installation Diameter - 52 mm (2-1/16") Installation Depth - 50 mm  Lens - Mineral Glass - Anti-fog IP Class - IPX6 Connector Type - AMP Superseal IP65 3-Pole  In the Box: Gauge Install/Safety Manual *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 12/24 V Series: AcquaLink Gauge Size: 2-1/16" Box Set: No Gauge Type: Oil Pressure Box Dimensions: 3"H x 3"W x 4"L WT: 0.32 lbs UPC: 7640178720565 Owner's Manual (pdf)

Read more less

NavControl TFT Controller for AcquaLink® & OceanLink® - BlackFeatures: Color: Black NavControl TFT Controller Specifically for AcquaLink® and OceanLink® This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less