Marine Navigation & Instruments

Chesapeake Black 4" Tachometer - 7000 RPM (Gas) (All Outboards)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.4" - Hole size: 3.375" (85mm)Specifications: Anti-scratch glass lens Perimeter lighted back light 12 VDC negative ground Can be adapted for 24 VDC systems Factory P/N TC9035*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer Voltage - Input Range (Volts): 12/24 V Series: Chesapeake Black Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266337183 Quick Guide (pdf)

Read more less

Navigator CompassFeatures: 4 1/2″ (115 mm) Ritchie CombiDial and Built-in Inclinometer When mounting this Compass to a bulkhead that is NOT perpendicular (90° angle) to the center-line of the boat and/or NOT vertical (90° angle) to the waterline of the boat (boat on level keel), a fairing block MUST be used to make the compass so. Easily Installed, Fits 5.75″ (146 mm) Mounting Hole Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Fiberglass Reinforced Bowl 45 degree Lubber Lines Exclusive Built-in 12v Amber LED Lighting Built-in Compensators to Easily Adjust for Deviation 100% Repairable Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 2 lbs 5 oz (1.05 kg)Notes:12v lighting standard - 24 & 32v lighting options are available. Specifications: Mounting Style: Bulkhead Lubber Lines: Yes Read: Both Backlight: Yes Box Dimensions: 7"H x 7"W x 8"L WT: 2.8 lbs UPC: 010342150301 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

85mm (3-3/8") VMH-35 Multifunction GaugeThe Veratron VMH 35 is engineered for single inboard or outboard engine applications. The Veratron VMH 35 has an embedded NMEA 2000 gateway that distributes sensor data inputs such as fuel, trim, and tachometer to other devices like chartplotters.  This saves the need for an additional external converter.  Highly adaptable to a wide range of onboard networks, it's equipped with analog inputs, making it ideal for refitting with older engines.An integrated GPS makes the VMH 35 the perfect standalone navigation solution.  It integrates speed, compass, and position into the engine data information.  A dedicated Veratron IBS (Intelligent Battery System) input can provide critical 12V battery monitoring capabilities.The Veratron VMH 35 has a mineral glass front that's optically bonded to the sun-readable hybrid display.  A sleek, brushed stainless steel bezel surrounds the device and fits into classic and modern marine décors.  Because small boat consoles are often fully exposed, the round display is waterproof to IPX7 criteria, both front and back.  It fits a standard 3-3/8" panel cutout size.Features: Integrated high-performance GNSS receiver Integrated Analog to NMEA 2000 Gateway Waterproof to IPX7 Stylish black-glass design with brushed stainless-steel ring New generation sun-readable color hybrid display Intelligent Battery Sensor (IBS) port NMEA 2000® certified In the Box: VMH35 Gauge Mounting Spinlock Wire harness  Safety Instructions  *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 3-3/8" Gauge Type: Multifunction Series: VMH-35 Box Dimensions: 4"H x 6"W x 6"L WT: 0.75 lbs UPC: 7640178729773 Owner's Manual (pdf)Brochure (pdf)

Read more less

52mm (2-1/16") Viewline Voltmeter 18-32V - Black Dial & BezelThe Viewline voltmeter displays the status of the generator and battery and their loads on a voltage scale. Values exceeding the normal charging voltages can therefore be monitored exactly. Features: Installation Dimension: 52mm - 2-1/16" Color: Black Lens: Plastic Double Anti-Fog Bezel Model: Black Round Measurement Range: 18 - 32V DC Category: Voltmeters Series: Veratron Viewline Application: VDO Engine Monitoring Signal Analogue: 0 - 32V DC IP Class Front: IP67 (IEC 60529) Operating Voltage: 18 - 32 Volt DC Functionality: 24 Volt Battery Condition Input: Analog Bezel Interchangeable: Yes - Clip-On Warning Light: Red LED Via Plus And Min Communication: Analog This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Gauge Type: Voltmeter/Ammeter Series: ViewLine Voltage - Input Range (Volts): 18-32v Box Dimensions: 3"H x 4"W x 8"L WT: 1.5 lbs UPC: 7640178722811 Brochure (pdf)

Read more less

EngineBox - Single EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors. The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments.The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box.Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 8-16v Gauge Type: Multifunction Gauge Size: N/A Box Set: No Box Dimensions: 4"H x 6"W x 6"L WT: 1.35 lbs UPC: 7640178724426 Brochure (pdf)

Read more less

R300 AIS ReceiverThe em-trak AIS R300 is a dual-channel high-performance AIS receiver that provides the best operational performance. You can receive high-performance, dependable AIS messages from the em-trak R300 thanks to its compact, durable, and power-efficient design. All AIS messages within range will be reliably received, processed, and output to your chart plotter or PC in real-time.Features: Small and robust  Plug-and-play connectivity with chart plotters and PCs  Low power consumption  Rugged, vibration-resistant  NMEA 0183, NMEA 2000, and USB support IP67 waterproof Anti-tamper and security features MOB and SAT detection This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Marine Network Cable - 50'Garmin's marine network cables offer additional cable lengths to help with installation. Various sizes are sold separately.

Read more less

Protective Screw Cover for N2K Connectors *10-PackScrew-cap covers for the NMEA 2000 Micro connectors, female and male versions available. *Sold in quantities of 10.

Read more less

EngineBox - Double EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors. The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments.The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box. Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Size: N/A Box Set: No Voltage - Input Range (Volts): 8-16v Gauge Type: Multifunction Box Dimensions: 4"H x 6"W x 6"L WT: 1.45 lbs UPC: 7640178724433 Brochure (pdf)

Read more less

NMEA 2000 Liquid Level Sensor - 200 to 600mmThe NMEA 2000® Liquid Level Sensor overcomes a laundry list of issues that plague traditional fluid level monitoring solutions, including being certified for drinking water—an industry first.  Powered by an NMEA 2000 network, three models are available to accommodate a wide range of tank depths from 200 mm to 1500 mm.The capacitive sensor is easily selectable between fresh and waste water, and is micro-adjustable for tank size. Unlike reed technology that only reports tank level in graduated steps, the Veratron NMEA 2000 Liquid Level Sensor, thanks to capacity measuring technology, offers level linearity on the full range. This provides precise data to make informed decisions on refilling and pumping out or discharging, for up to 4 tanks.Completely plug-and-play, the Veratron sensor simply connects directly into the NMEA backbone with its integrated Micro-C M12 5-pin NMEA 2000 connector. This provides the nominal 12V power and the ability to view tank level from any networked display.UL94, CE, REACH and RoHS compliant, the NMEA 2000 Liquid Level Sensor is IPX9K rated as an exposed device. Features: Includes Flange Installation Kit 300mm NMEA Pigtail Connection Technical Specifications: Connector - NMEA 2000 Micro-C 5 pin M12 Male IP Protection Class - IPX9K In the Box: Sensor Sealing Kit Rubber Gasket Mounting Bracket Mounting Screws and Allen Wrench  *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 30"L WT: 1.45 lbs UPC: 7640178729384

Read more less

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations. For use with: SS60 B60 Specifications: Type: Tools Box Dimensions: 1"H x 4"W x 5"L WT: 0.5 lbs

Read more less

Helmsman AdapterUsed to retrofit existing mounting hole sizes 4-1/4" - 5" in diameter.Includes: Adapter Ring Gasket Mounting Screws Instructions and addendum For use with: HF-742, HF-743 or SS-1002

Read more less