Chesapeake White SS 4" Tachometer w/Systemcheck Indicator - 7000 RPM (Gas - Johnson/Evinrude Outboard)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.SystemCheck Warnings:
No Oil
Engine Overheat
Check Engine
Low Oil
4" - Hole size: 3.375" (85mm)For Engine Types:Johnson/Evinrude OutboardSpecifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N TC9881*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Tachometer w/System Check
Box Set: No
Series: Chesapeake White
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 4"
Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs
UPC: 759266338500
Quick Guide (pdf)
Chesapeake Black 2" Voltmeter (10-16 VDC)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.2" - Hole Size: 2.0625" (53mm)Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N VP9154*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Voltmeter/Ammeter
Series: Chesapeake Black
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266137059
Quick Guide (pdf)
Chesapeake White SS 2" Trim Gauge (Johnson/Evinrude/Suzuki Outboard)Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:Johnson/Evinrude/Suzuki OutboardsSpecifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N GP9418*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Trim Guage
Series: Chesapeake White
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266138094
Quick Guide (pdf)
Chesapeake Black SS Boxed Set - Outboard MotorsPerimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Packaged and ready for the display counter. This 4 Gauge Boxed Sets offer a complete set of gauges ready to install.Outboard Motors Boxed Set Includes:
Speedometer (60 MPH) (Mechanical)
Tachometer (7000 RPM)
Fuel Level
Voltmeter (10-16 VDC)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Dual Scale - Imperial and Metric
Factory P/N KTF004*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Box Set
Voltage - Input Range (Volts): 12/24 V
Series: Chesapeake Black
Box Set: Yes
Box Dimensions: 7"H x 7"W x 21"L WT: 4.3 lbs
UPC: 759266000049
FAP3011 Control Head for NavPilot 300 Only Up To 3 Control Heads On 1 System Done Via N2k.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Analog - NMEA2000 ConverterThis unit converts analog data from an external sensor to the CAN bus format data.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Platinum 4" Speedometer - 60MPH - GPS (Studded)Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look. All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment. GPS Speedometer is a drop in replacement for your current speedometer to match your existing instrument dash.GPS information is gathered from an internal GPS antenna. No external antenna required. The Faria GPS Speedometer uses a highly accurate 48 channel GPS receiver. You can be sure that the Faria GPS Speedometer is giving you the most accurate GPS information available on the market today.Course Over Ground (COG) and actual heading (compass heading over ground) are displayed on the optional digital LCD.Speed data is shown by an analog pointer. This pointer is driven by a digital stepper motor for increased accuracy and minimized pointer bounce during vessel operation.4" - Hole size: 3.375" (85mm)Specifications:
Domed Glass Anti-fog, Scratch Resistant Lens
Stainless Steel Bezel
Blue LED Illuminating around the Perimeter of the Dial
Illuminated Backlit Fire-Orange Tip Pointer
No external GPS antenna required
Ultra fast Satellite acquisition time (TTFF) 1 second from Hot start
Speed Accuracy of +/- 1 MPH
Heading Accuracy of +/- 1 Degree
Digital stepper motor driven pointers
Ideal replacement for speed sensing devices (pitot tube and paddle wheel) that fail over time
Perfect for slow moving vessels where pitot tubes just don't work
Deutsch connectors
Factory P/N SGP128*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Box Set: No
Gauge Type: Speedometer
Gauge Size: 4"
Voltage - Input Range (Volts): 12/24 V
Series: Platinum
Box Dimensions: 5"H x 6"W x 7"L WT: 0.55 lbs
UPC: 759266220102
Brochure (pdf)
Chesapeake Black 5" Multifunction GaugePerimeter-lighted black dial with stylish blue and white graphics, polished stainless steel bezel, contoured White pointer, and domed glass lens. 5" - Hole size: 4.375" (112mm) Multi-Function Gauge Displays:
Fuel (E-1/2-F)
Voltmeter (10 - 18 VDC)
Oil Pressure (0 - 80 PSI)
Water Temperature (120 - 220° F)
4" - Hole size: 3.375" (85mm)Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N GF4005*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Box Set: No
Gauge Size: 5"
Voltage - Input Range (Volts): 12/24 V
Gauge Type: Multifunction
Series: Chesapeake Black
Box Dimensions: 8"H x 8"W x 8"L WT: 1.6 lbs
UPC: 759266337626
Chesapeake Black w/Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Voltmeter, Water Temperature & Oil PSI - Inboard MotorsPerimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens. Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install.Boxed Set Includes:
Speedometer (0 to 60 MPH) (GPS)
Tachometer (0 to 6000 RPM)
Fuel Level (E to F)
Voltmeter 10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 80 PSI)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Dual Scale - Imperial and Metric
Factory P/N KTF064*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Box Set
Box Set: Yes
Voltage - Input Range (Volts): 12/24 V
Series: Chesapeake Black
Box Dimensions: 6"H x 10"W x 21"L WT: 4.05 lbs
UPC: 759266000643
Dress White 2" Oil Pressure Gauge (80 PSI)Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens.A pressure gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the change in pressure.2" - Hole size: 2.0625" (53mm)Specifications:
Anti-scratch glass lens
12 VDC negative ground
Can be adapted for 24 VDC systems
Dual Scale - Metric and Imperial
Factory P/N GP9573*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Oil Pressure
Series: Dress White
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266131026
Quick Guide (pdf)
WindTrak 10 Sport Wind VaneWith the introduction of the WindTrak 10 Sport, WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia van, and easy-to-read, fully adjustable tacking tab system.Reflector tape on the vane and tacking tabs make WindTrak 10 Sport easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 10 Sport has a 10" (25 cm) vane. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g). Specifications:
Type: Wind Indicator
Instrument Function: Wind
Box Dimensions: 2"H x 3"W x 12"L WT: 0.2 lbs
UPC: 011698001934
FI5001The FI5001 is an analog Wind Transducer for use with NavNet 3D and the FI50 series of instrument displays. It is capable of detecting wind angle accuracy of better than 10° and wind speed accuracy of better than 5% (20 kt). The FI5001 has a power requirements of less than 40 mA on a 12VDC system.Important Note: The FI5001 Sensor does not come with a cable as standard. Please select a 30 meter or 50 meter cable kit when ordering the FI5001 Wind Sensor.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.