Marine Navigation & Instruments

Kronos 2" Fuel Level Gauge (E-1/2-F)Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub.Fuel Level gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel.2" - Hole Size: 2.0625" (53mm)Specifications: Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Factory P/N GP7683*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Fuel Level Series: Kronos Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Box Set: No Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs UPC: 759266190016 Quick Guide (pdf)

Read more less

Euro Black 4" Tachometer w/Systemcheck 7000 RPM (Gas) f/ Johnson / Evinrude Outboard)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Electronic tachometers work by counting pulses generated by the ingition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correct position you let the tachometer know how many pulses are sent per each engine revolution.These tachometers have a warning light system built into the dial that show off warning indicators when a fault is detected from the engine.4" - Hole size: 3.375" (85mm)For Engine Types:Johnson and Envinrude OutboardSystemCheck Warnings: No Oil Engine Overheat Check Engine Low Oil Specifications: Anti-scratch glass lens Plastic Cases for corrosion resistance and long life Perimeter-lighted Black dial Can be adapted for 24 VDC systems Factory P/N TC9951*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Tachometer w/System Check Series: Euro Black Voltage - Input Range (Volts): 12/24 V Gauge Size: 4" Box Set: No Box Dimensions: 5"H x 6"W x 6"L WT: 0.7 lbs UPC: 759266328501 Quick Guide (pdf)

Read more less

Engine Management Unit Analog - NMEA2000Share engine information on the NMEA 2000® bus...The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel.The EMU-1 has a PC based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models. Capable of measuring a wide range of engine parameters, the EMU-1 reports how the engine is operating and shares the information across the network.Designed to simplify the conversion of analogue engine parameters (e.g. Temperature, pressure and RPM) into NMEA 2000 engine PGNs, the EMU-1 simplifies processes and reduces the number of input/output wires required at each engine. Additionally, the EMU-1 also supports the conversion of analogue transmission parameters and battery status to the associated NMEA 2000 PGN's.The two-part screw terminal connection system allows for an easy pluggable connection to an engine wiring harness.Multiple engines are supported by the setting of the engine instance using the EMU-1 configuration tool. Currently one EMU-1 per engine is supported. Support for multiple engines on a single EMU-1 is currently planned as a future firmware update.The customised case ensures that the electronics are sealed while allowing quick access to the electrical connections.It is recommended that an Actisense NGT-1 NMEA 2000 PC Interface is available for every EMU-1 installation. The NGT-1 can be used to update the Firmware, connect the Configuration Tool and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGT-1 page for product details.Features: 6 gauge inputs 4 alarm inputs 2 tacho inputs Logs total engine time using the tacho inputs 2 auxiliary inputs for additional flexibility Simple single wire gauge connections; common ground referenced Manual measurements not required when configuring Firmware can be updated over NMEA 2000 network Easy customisation for different installations (requires an NGT-1 and PC software) Waterproof electronics and splash-proof connections Pluggable connectors for quick and easy installation Optional DIN rail mounting kit available This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Data Interface: NMEA 2000 Box Dimensions: 3"H x 6"W x 9"L WT: 1 lbs UPC: 5060998710331 Owner's Manual (pdf)Brochure (pdf)

Read more less

Platinum Series Box Set - Outboard MotorsFaria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.  All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.  Packaged and ready for the display counter. This 4 Gauge Boxed Sets offer a complete set of gauges ready to install.Inboard Motors Boxed Set Includes: Speedometer (0 to 70 MPH) (Mechanical) Tachometer (0 to 7000 RPM) Fuel Level (E-1/2-F) Voltmeter (10-16 VDC) Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N KTF0185*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: Yes Series: Platinum Gauge Type: Box Set Gauge Size: Various Voltage - Input Range (Volts): 12/24 V Box Dimensions: 7"H x 10"W x 21"L WT: 4.25 lbs UPC: 759266001855 Brochure (pdf)

Read more less

Coral 2" Trim Gauge for Suzuki, Johnson & Evinrude OutboardPerimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer, and flat glass lens.2" - Hole Size: 2.0625" (53mm)For Engine Types:Johnson/Evinrude/Suzuki OutboardsSpecifications: Scratch Resistant Lens Black Aluminum Bezel Contoured White Pointer Factory P/N GP9273*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Trim Guage Series: Coral Gauge Size: 2" Box Set: No Voltage - Input Range (Volts): 12/24 V Box Dimensions: 4"H x 4"W x 5"L WT: 0.25 lbs UPC: 759266130166

Read more less

OceanLink® 4.3" NMEA 2000® Certified TFT Gateway - BlackThe new OceanLink® 4.3" multifunction TFT Display features a complete 24-bit/16 m colors optically bonded display with transmissive layer technology for perfect readability even in direct sunlight. The TFT Display shows and distributes a wide array of data received from NMEA 2000® and J1939 CAN Bus systems and analog sensors directly connected to the display. Users can customize up to 40 data pages with single, double, treble, or quad grid layouts. TFT Displays can be daisy-chained with other OceanLink® gauges, displays, or NavControls using the unique VDO Marine Bus or directly connected to the NMEA 2000® backbone (optional adapter cable required) for simple installation on any yacht. Features: Optically bonded mineral glass lens • Front & rear side protection rating IPX7  1x NMEA 2000® connector  1x J1939  2x Analog input  1x Frequency input  2x 4–20 mA output  1x EasyLink data output  1x Programmable alarm output 500 mA  Operating temperature range -20°C/+70°C 12/24V WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Screen Size: 4.3" Shape: Square Instrument Function: Multifunction Box Dimensions: 4"H x 6"W x 6"L WT: 1.7 lbs UPC: 7640178720930 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Dress White 2" Hourmeter (Digital) Perimeter-lighted White dial with bold black graphics, white aluminum bezel, contoured black pointer, and flat glass lens.Hourmeter operates by applying battery voltage across the gauge's register motor to ground.  The register increments increase when the key switch in on.  Route power through a normally open Oil Pressure switch to count "engine running" hours. 2"- Hole Size: 2.0625" (53mm)Specifications: Anti-scratch glass lens 12 VDC negative ground Can be adapted for 24 VDC systems Scale - 0 to 10000 Hours Factory P/N MH0240*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Hourmeter Box Set: No Voltage - Input Range (Volts): 12/24 V Gauge Size: 2" Series: Dress White Box Dimensions: 4"H x 5"W x 5"L WT: 0.3 lbs UPC: 759266131309

Read more less

Spun Silver Box Set of 4 Gauges for Outboard Engines - Speedometer, Tach, Voltmeter & Fuel LevelPackaged and ready for the display counter. This 4 gauge boxed set offers a complete set of gauges ready to install. Boxed Set Includes: Speedometer (0 to 55 MPH) Tachometer (0 to 6000 RPM) Fuel Level (E to F) Voltmeter (10 to 16 AMPS) Factory P/N KTF0182*Sold as a Box Set**Gauge Covers not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Type: Box Set Box Set: Yes Voltage - Input Range (Volts): 12/24 V Series: Spun Silver Box Dimensions: 6"H x 10"W x 21"L WT: 4.25 lbs UPC: 759266001824

Read more less

X-23WW RitchieSport Compass - Dash Mount - White/BlackFeatures: 2″ (51 mm) Direct Reading Dial Easily Installed, Fits Standard 2 1/16″ (5.50 cm) Instrument Hole The View Adjusts up to 30 degrees Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Exclusive Built-in Green NiteVu Lighting High-Temperature Composite Construction for Extended Operating Range DirectiveForce Magnets Exclusive 5-Year Ritchie Warranty Specifications:Approx. Shipping Weight: 5oz (142g)Notes: X-23 Compasses do not have Built-in Compensators. Comes standard with 12V lighting Some custom-built OEM models may have different lighting Specifications: Backlight: Yes Lubber Lines: Yes Mounting Style: Dash Read: Front Box Dimensions: 3"H x 4"W x 5"L WT: 0.55 lbs UPC: 010342121240

Read more less

SP-70 Autopilot with Rotary Feedback for Inboards - No DriveLow Cost Autopilot Designed For Easy InstallationThe SI-TEX SP-70 Autopilot will add relaxation to your cruising and fishing activity. Designed for almost any boat and easily installed on Outboard, Inboard and Sterndrive vessels with Hydraulic or Mechanical steering systems.Features: Ultra-compact, waterproof Control Unit has simple keypad operation and large LCD display of heading course, rudder angle, operating mode and error messages Control Unit can be used as dash-mounted keypad or quickly and easily removed from mounting bracket for use as a handheld portable.Additional steering stations can be easily added with optional plug-in connectors Exceptionally easy to use. Just steer to desired course, press the PILOT key and the system takes over to steer you on your way - automatically Built-in NMEA0183 Loran/GPS interface for precise course-line navigation along routes Bold, backlit displays with ten levels of brightness for clear reading in any light Digital displays of rudder angle and operation mode in use, constantly giving you up-to-the-minute operating status Automatic Sea State and Trim Controls and ten selectable levels of rudder sensitivity with high and low speed settings for smooth, precise steering Rudder feedback verifies autopilot's commands Ghost Rudder backup allows autopilot to use memory of rudder movements to calculate new movements in event of rudder feedback failure Heading Output feature allows you to stabilize radar display Built-in diagnostic and self tests, plus visual and audible alarms Power Steering mode offers convenient push-button steering Stand By mode for manual steering situations. Optional analog Rudder Angle Indicator for easy, at-a-glance reading of exact rudder position Works with solenoid valves as well Specifications: Type: Parts Box Dimensions: 7"H x 19"W x 20"L WT: 13.6 lbs UPC: 010407710112 Quick Guide (pdf)Brochure (pdf)

Read more less

Integrated Rudder Feedback UnitsOC15SUK27BTypically one of the most complex and time consuming aspects of autopilot installation is fitting the rudder feedback unit and ensuring that the geometry matches the full range of rudder movement. The solution is an integrated rudder feedback unit that directly mounts to the drive unit itself.The standard RFB unit's (OC15SUK27A - OC15SUK27E) are dedicated to a particular manufacturer.Both types are attached directly to the drive unit for simple installation. Specifications: Type: Parts Box Dimensions: 3"H x 6"W x 6"L WT: 0.4 lbs UPC: 628309166571

Read more less

SportAbout Hand Bearing Compass Features: Easy to Read 2″ (51 mm) Direct-Reading Dial Hardened Steel Pivot and Sapphire Jewel Movement Built-in Roller Diaphragm for Extended Temperature Operating Range International Safety Yellow Case Silicon Impact Resistant Case with Neck Lanyard Compact Size for Easy Handling and Storage QuickSight V-Notch and Lubber Line for Easy Heading Alignment Non-Electric Chem Sticks Provide 18 Hours of Night Lighting Holder Available in Black or White. Ideal for Deck Mounting SportAbout Compasses on Small Boats Specifications: Read: Front Backlight: No Lubber Lines: Yes Box Dimensions: 3"H x 5"W x 7"L WT: 0.3 lbs UPC: 010342170088 Quick Guide (pdf)Owner's Manual (pdf)

Read more less