Marine Navigation & Instruments

Autopilot Pump Type 3 Adjustable Reversing 12V Up to 30CI CylinderFeatures: RELIABLE - Piston pump technology with only three moving parts TWIC THE POWER - Delivers over twice the hydraulic output per watt of input HALF THE POWER CONSUMPTION - Accurate ram positioning means fewer course corrections ADJUSTABLE FLOW RATE - Configure performance to suit your vessel EASY SERVICING - Shut off valves allow removal without draining steering system TWICE THE POWERThe unique Octopus piston pump delivers over twice the hydraulic output per watt of input than a standard hydraulic gear pump.HALF THE POWER CONSUMPTIONGear pumps leak oil between the gears, while a piston (such as used in car engines) does not.  This means the piston pump will place the cylinder ram exactly where it is required, positioning the rudder accurately.  This gives far sharper steering, reducingunnecessary course corrections meaning battery consumption on Octopus pumps is up to half that of other pumps.PINPOINT ACCURACYLeading autopilot manufacturers choose Octopus pumps for their non RFB pilot systems which do not have a Rudder Feedback unit. Previously, slop in the system caused by gear leakage meant that a Rudder Feedback unit was necessary to tell the pilot the exact rudder position. As Octopus pumps will always bring the ram back to the required position the Rudder Feedback unit is not required, which also greatly simplifies installation.SAVE ON INSTALLATION COSTSA professional installation should always have a method of isolating the pump from the steering system - Octopus pumps feature inbuilt shut off valves in the pump manifold.ADJUSTABLE FLOW RATEA pump that does not have variable flow (unless dedicated to a range of cylinders such as our fixed 0.8L pump) will be operating too fast or too slow in 90% of cases.  Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate, which either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or it will operate at high pressure for short periods of time - also putting unnecessary strain and wear on the system.Octopus Variable Flow Reversing Pumps precisely control the speed of the ram, reducing unnecessary battery consumption, pressure, strain and wear on the hydraulic system. Specifications: Type: Pumps/Drives Box Dimensions: 5"H x 6"W x 12"L WT: 8.75 lbs UPC: 628309272791

Read more less

Temperature Sensor 240° F - 1/8-27NPTFAll Temperature sensors are designed to work with VDO gauges only. Sensors are matched to gauges according to maximum reading on dial face. All sensors are standard ground (sensor case to common ground). Please note: VDO sensors have tapered threads and DO NOT require the use of Teflon tape or pipe sealant. This will interfere with grounding causing incorrect instrument readings. Features: Marine 240°/250°F Temperature Sender 1/8-27 NTPF Threads All brass construction #8-32 Connection Works with most standard marine temperature gauges *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

WindTrak 15WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.WindTrak is the perfect choice for all cruising and racing boats 15' (4.6 meters) and bigger.Reflector tape on the vane and tacking tabs make WindTrak 15 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 15 has a 15" (38 cm) vane. Includes through-bolt or drill and tap mounting socket; 5/16" -18 stainless stud, washers and nut. Stands 12.75" (32 cm) tall and weighs just 3.6 ounces (101 g).A bird-proof spike extends another 10" (24 cm) above the vane to discourage birds from landing. Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 5"W x 16"L WT: 0.5 lbs UPC: 011698315000

Read more less

Cockpit International Gen II 4K RPM Tachometer with HourmeterCockpit International Gen II is the ideal instrumentation solution when performance and cost-effectiveness are both a high priority. Featuring high-quality components and rugged materials, Cockpit International Gen II provides reliable performance that can be counted on.Features: Black dial and bezel color  Tachometer and hourmeter Specifications: Input Type: Analog Application: Universal Diameter (US): 3-3/8 in Diameter (Metric): 85mm Dial Scale: Single Scale Min Range Outer Scale: 0 RPM Max Range Outer Scale: 4000 RPM On Dail GUI: RPM Connection: m4 stud Voltage: 12V Mounting Hardware: U-Bracket Housing Material: Zinc Plated Steel Dial Color: Black Bezel Color: Black Lighting Method: Bulb Lighting Color: White Lighting Type: Flood Pointer Color: Red Pointer Type: Solid Lens Material: Mineral Glass Lens Construction: Single Mounting Diameter: 85mm Component Reference: 2.91E+12 Country of Origin: IN (India) Type: Tachometer

Read more less

14 M ID SIDB Y - SOLIX®/APEX® Side Imaging & 2D Splitter Cable The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or non-MEGA Imaging transducer and connect both transducers to a single Humminbird control head. This y-cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.Features: Compatible with: All SOLIX and APEX models Combines a MEGA Side Imaging transducer (or non-MEGA Imaging) and accessory 2D transducer and allows them to be connected to a single Humminbird control head. Automatically provides Side Imaging, Down Imaging and temperature from the standard all-in-one transducer and sources 2D sonar and digital depth from the 2D accessory transducer, without the need to switch data sources manually Includes Transducer ID for Airmar® accessory transducers, which automatically recognizes transducer type for easy installation and setup. Cable length: 30" (76 cm) 1-Year Limited Warranty

Read more less

52MM OceanLink Bezel - Round - BlackThe Oceanlink modular bezel concept offers true design flexibility in the layout of instrument panels.  The three attractive designs in Black, White or Chrome are suitable for every machinery instrument panel or special vehicle cockpit. Each of the bezel designs is compatible with 52MM OceanLink products.Features: Color - Black Bezel Profile - Round Size - 52mm Interchangeable Clip System *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Diameter (mm): 52 Box Dimensions: 1"H x 4"W x 7"L WT: 0.05 lbs UPC: 7640178721517

Read more less

Heavy Duty Normally Closed Single Circuit 15 PSI Pressure SwitchFeatures: Ground - Floating Connection - # 8-32 Voltage - 6-24V Circuit - Normally Closed - Single Contacts - Silver Alloy Max. Pressure Range - 15 PSI Terminals - 2 *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs UPC: 754059008165

Read more less

Reed Switch Fuel Sender - 900 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of  35.4" (900mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 37"L WT: 1.2 lbs UPC: 754059064499

Read more less

30M Power & Analog Video Cable for NightwavePower and analog video replacement cable for SIONYX's Nightwave Marine Night Vision Camera. An official SIONYX accessory, this cable is 30 meters (98.4 feet).

Read more less

Cyclone Pro Radar 110W with 3' Open Array & 15M CablesSOLID-STATE OPEN ARRAY RADARThe ultimate expression of design, rugged performance, and unmatched situational awareness, Cyclone solid-state open-array radars give mariners the confidence to tackle the harshest conditions, gain the upper hand in the hunt for fish, and navigate busy waterways with confidence. Cyclone radars deliver superior target separation and long-range resolution using CHIRP pulse compression and Raymarine beam sharpening technology.  Each model features innovative detection capabilities, including Cyclone Bird Mode, RangeFusion™ technology, and high-speed 60 rpm imaging.CUTTING EDGE DESIGN Aircraft-wing-inspired design is engineered for extremes with a best-in-class 100-knot wind rating and designed to meet the commercial-grade IEC 62388 standard for shipborne radar At 13.1 inches (335 mm) tall, Cyclone’s lower profile allows greater flexibility of boat architecture and more adaptable installation options. Innovative pedestal design conceals cable connections for a cleaner installation THE ULTIMATE SITUATIONAL AWARENESS Fast 60 RPM rotational speed delivers 360 degrees of awareness and accurate target tracks in real-time Doppler target tracking simplifies the interpretation of dangerous and safe targets for added safety Professional grade ARPA target tracking. Cyclone automatically tracks up to 50 targets using the same advanced ARPA technology trusted by the United States Coast Guard. RangeFusion™ technology combines short and long pulses into the single high clarity radar image, delivering exceptional short-range and long-range targets simultaneously. FISHING INTELLIGENCE Performance tuned for locating sea birds Enhanced Cyclone Bird Mode using CHIRP pulse compression technology 3' OPEN ARRAY SIZE3' array provides open array performance in tight spacesIn the Pedestal Box E70621: Pro Pedestal M10 Stud x4 M10 Nut x8 M10 Spring Washer x4 M10 Plain washer x4 Mounting gasket Mounting template Radar data cable 15m Power cable 15m VCM100 Cable clamp VCM100 mounting screw x2 Cable clamp mounting screw x3 3' Antenna Box E70628: Antenna Threaded alignment guide Washer Spring washer Nut All Axiom displays require the forthcoming LightHouse Hvar 3.16 software update for complete Cyclone compatibility.  LightHouse Hvar 3.16 will be available in early November 2021. Specifications: Array Size (Inches): 36" Power - Output: 110w Range - Max (Miles): 96nm Box Dimensions: 2"H x 12"W x 12"L WT: 78 lbs Brochure (pdf)

Read more less

High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 120-Degree Horizontal Field of View - 2.8mm LensIris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application.The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via the CMAC series of switchers, interfaces, and recorders.The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation and is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings.The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts.Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions.Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution.Features: Marine Grade 316 Stainless Steel rugged corrosion-free case Compatible with Raymarine / Axiom chart plotters running LH2 and higher Compatible with Simrad, Lowrance & B & G Compatible with Furuno software running TZ4.1 and above Garmin Compatibility in conjunction with CMAC Systems High polish finish Built-in infra-red LED illumination (10m Range) PoE & 12VDC connections Extremely low power consumption IP66 environmental protection Specifications: Lens (millimeter): 2.8mm Horizontal Field of View: 120-degree HFOV Sensor (inch): 1/4” CMOS Sensor Resolution: Variable - 1920x1080P (2MP) max Interface: RJ45 10/100 base t ethernet Video Processing: H.264 Codec / dual stream Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF Onvif: Profile S v2.4 Bitrate: VBR / CBR 32kbps 8Mbps Illumination: 6 x 850nm infra-red - 10-meter range Lens/Field of View: 2.8mm option Mirroring: Horizontal & vertical - configure via browser Automatic Gain control: Supported / multiple levels Compatibility:  Raymarine / Axiom (LH2 or higher), NAVICO MFDs inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems Operating Temperature: -30 +60 Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket Material: 316 Stainless Steel Power: PoE IEEE802.3af / 12VDC <200mA max. Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H Environmental: IP66 Brochure (pdf)

Read more less

RJ45 Waterproof ConnectorFLIR's RJ45 waterproof connector is a key component for installing and operating your maritime thermal camera from FLIR. The RJ45 waterproof connector connects the thermal camera itself to the Joystick Control Unit (JCU) using an Ethernet cord, transmitting both data and electricity along a single cord. FLIR has designed the RJ45 waterproof connector with a standard RJ45 port, and it is PoE enabled so you can connect it directly to your JCU without having to use a PoE Injector. It is designed with a sturdy waterproof enclosure to protect against the elements, meaning the connector won't be the weakest link in your thermal imaging chain. You can't control your thermal camera without FLIR's RJ45 waterproof connector.

Read more less