Marine Plumbing & Ventilation - Accessories

PURASAN® EX Refill Tablets *1 Tub of 6 TabletsA concentrated chlorinating and brominating agent for use as bactericide and disinfectant in the PURASAN Type 1 Marine Sanitation Device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Icerette Icemaker Assembly - 115V for 87 Models OnlyReplacement icemaker mold for Raritan 87 model ice makers.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Service Kit Waste Tank Replacement Lid with Sensor - GreyThe Grey Waste Tank enables the user to manage all grey waste onboard easily, through one skin fitting. The Intelligent Control sensor integrated into the tank lid provides automatic operation of the grey waste pump. The sensor will detect water in the grey waste tank at a pre-determined level, and will automatically activate the grey waste pump. When the tank is emptied, the switch will automatically turn the grey waste pump off. The 2 sensor models include a second sensor that can be used to control a second grey waste pump. It is factory set to activate at a higher water level and will provide additional pumping capacity during periods of high inflow to the grey waste tank. Alternatively, the second sensor can be wired to a high-level alarm, warning of a high water level within the grey waste tank. Brochure (pdf)

Read more less

Marine Elegance Discharge Pump Assembly - 12VRaritan's Marine Elegance Discharge Pump Assembly is available in 12V.In the Box: M23A             #10 Lockwasher SS (5) 1108A            10-32 SS Nut 161123           Macerator Blade 31-102           Motor Shaft Seal 221110           Discharge Pump Seal Plate 221105           O-Ring 161115            Impeller 221115            Discharge Pump Macerator Housing 31-114             Lock Nut 10-32 W/Nylon(3) 221012            Discharge Motor 12 V or 221024 Discharge Motor 24V 221141W         Discharge Hose 221135W         Joker Valve (2) (Also includes #24) 221145            Discharge Adapter Fitting 221146            Joker Valve Insert 221160            Discharge Hose Clamp (small) 221165            Discharge Hose Clamp (large) VLVE               Vent Valve Assembly FC001             Vent Valve Hose Clamp WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Seat Lid & Seat for 960 Series Portable Toilet - ParchmentReplacement seat and lid for 960 Series toilets.Features:Color - Parchment*Sold as an IndividualWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 2"H x 15"W x 16"L WT: 1.82 lbs UPC: 713814067632

Read more less

Motor Assembly Kit 12V for MasterFlushMasterFlush 12V DC Motor Assembly from Dometic™.Features: Motor: Approx 4" Diameter x 3-1/4" Tall. Complete Assembly is 5-1/4" Tall. Pump Head is 4" OD with a 1-1/4" OD x 1" ID Port. Wiring Harness is 11" L. 13.5V DC 21 A Intermittent Duty Motor WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Upper Assembly Replacement for 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 Washdown PumpsThis Shurflo upper assembly replacement is for the 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 washdown pumps listed below: Shurflo Pro Blaster II Deluxe 4.0 (4248-153-A09 [4248-153-E09]) Shurflo Pro Blaster II Deluxe 4.0 24 VDC (4248-163-A09 [4248-163-E09]) Shurflo Pro Blaster II Ultimate 5.0 (4258-153-A09 [4258-153-E09]) Shurflo Pro Blaster II Ultimate 5.0 24 VDC (4258-163-A09 [4258-163-E09]) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Stainless Steel Constant Torque Clamp 5/8" Band, Hose I.D. - 4", Hose O.D. - 4.25" TO 5.125"Virtually all rubber hose compresses (cold flow) after installation of a clamping device, resulting in an almost immediate torque loss that can exceed 80% of installation torque. Similarly, virtually all metal connections expand as a system heats up, and then contract as the system cools. Conventional worm gear, T-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for without re-tightening or loosening the clamps. This clamping system is an “active” clamping mechanism, which monitors and then compensates for the changes by actually changing diameter through a unique worm gear Belleville assembly.Specifications:  Recommended max. torque - smaller ID. Sizes up to 730-3000: 30 to 70 in.-lbs, larger ID. Sizes above 730-3000: 50 to 120 in.-lbs. Hose I.D. - 4", Hose O.D. - 4.25" TO 5.125" Construction: Band & Housing: 304 Stainless Steel 5/8” Wide Band Bellville Spring Washers & Screw: 401 Stainless Steel

Read more less

SmartStart III Single Phase Soft Starter for 230V GT16 Marine Air ConditionerReduces boat air conditioning startup spikes.Features: Water-resistant Prevents voltage spikes when starting, helps prevent power outages Problem-free air conditioner start-up at moorings with low-quality electrical circuit protection Reduces startup amps by up to 65% Brochure (pdf)

Read more less

Quick Connect Clips 6 GPM *PairThe clip set is a spare part designed to provide a secure, reliable attachment solution for selected Jabsco and Flojet pump models. Made with durable materials, it supports dependable installation and serviceability in pump systems where a correct-fitting clip is required.Compatibility: Jabsco PAR-MAXplus 82600 Jabsco PAR-MAXplus 82605 Jabsco PAR-MAXplus 82906 Flojet VersiJet R8600XXX Flojet VersiJet R8600-XXX Alternative to Flojet 20408700

Read more less

Power Converter for 120/240 VAC Marine Elegance ToiletsRaritan's Power Converter 120/240 Transformer.Specifications:For 120/240 VACWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Constant Torque Clamp 5/8" Band, Hose I.D. - 1-7/8" to 2-1/2", Hose O.D. 2.25" to 3.125"Virtually all rubber hose compresses (cold flow) after installation of clamping device, resulting in an almost immediate torque loss that can exceed 80% of installation torque. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools. Conventional worm gear, T-bolt, and other clamps are passive, in that expansion or contraction of components cannot be compensated for with out re-tightening or loosening the clamps. This clamping system is an “active” clamping mechanism, which monitors and then compensates for the changes by actually changing diameter through a unique worm gear Belleville assembly.Specifications: Hose I.D. - 1-7/8" to 2-1/2", Hose O.D. - 2.25" to 3.125" Recommend max. torque - smaller id. sizes up to 730-3000 - 30 to 70 in.-lbs, larger id. sizes above 730-3000 - 50 to 120 in.-lbs Construction: Band & Housing: 304 Stainless Steel 5/8” Wide Band Bellville Spring Washers & Screw: 401 Stainless Steel

Read more less