Heavy-Duty Brass Tap - Chrome PlatedThis basin tap has a heavy-duty chrome-plated brass body.Specifications:
Exposes Tap Part Height: 2-1/2"
Water Connection: 1/2 in. NPS-M
Material: Chrome-plated brass body with chrome-plated ABS plastic knobs
Mounting Hole: 7/8 in.
Shipping Weight: 3 lbs.
*The "P" within the part number indicates retail packaging
Recessed Shower with 6' White Hose - Euro Trigger SprayerThis part is part of the fifth generation of Scandvik recessed showers. Also, this recessed shower has an easy-to-use Euro trigger sprayer handle.Features:
White handle, white cup & cap with 6’ white nylon hose
Improved UV protection and a better water seal when the cap is closed
Built-in grab ring for easy deployment
Mounts vertically or horizontally
Mounting hardware is included
Specifications:
Water connection: 3/8 in. BSP-F threaded fitting
Material: ABS and chrome-plated brass (push-button)
Mounting Hole: 2-3/4 in.
Shipping Weight: 4 lbs.
*The "P" within the part number indicates retail packaging
18916-0040 Replacement Pressure Switch - 40 PSICompatible Series:
31595-Series
31600-Series
31620-Series
31630-Series
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
ARG-1 Strainer Service KitARG Series raw water strainer service kit.Compatible with the Groco ARG 500, 750 and 755 series strainers.In the Box:
(1) - 2-153 - Sight Glass O-Ring
(1) - 2-135 - Cap O-Ring
(1) - 2-228 - Cap O-Ring
(4) - PFW-2 Set - Sight Glass Bolt Washer
(1) - 2-011 - Drain Plug O-ring Before 08/01/01
(1) - 2-111 - Drain Plug O-ring After 08/01/01
*Sold as an Individual Specifications:
Type: Service Kits
Box Dimensions: 0"H x 4"W x 6"L WT: 0.04 lbs
UPC: 742985010413
Owner's Manual (pdf)
Smart Toilet Control Circuit BoardSmart Toilet Control (STC) is a controller for flushing toilets to optimize water use without compromising the quality of flush.Control consists of a controller, panel, and 7’ of cable. STC is designed to automatically start a flushing cycle if normal or water-saver buttons are pressed.The water-only button brings inlet water to the bowl when pressed and the empty-only button evacuates the bowl. Both water-only and empty buttons have a time limit of eight seconds.Flush timing of initial fill, discharge, and final fill are fully programmable from the panel. If wired, the panel also shows the holding tank's full status. When holding the tank full the LED is lit, and normal and water saver buttons are disabled. Water only and the empty button continues to function. Control is reverse polarity protected. In the case of reverse polarity motors and solenoids will activate as soon as power is connected. After reverse polarity is corrected (within 10 minutes), the unit will work as normal.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Straight Handle Pull Out Sprayer - White with 6' HoseThis straight-handled sprayer is as reliable as it is functional.Features:
White sprayer with 6 ft. white nylon hose
Included counter-top holder leaves the sprayer in a ready-for-action position
Sprayer handle features a trigger sprayer for on/off control or a flip-up lock for continuous water flow
Specifications:
Water Connection: 3/8 in. BSP-F fitting
Material: Glass reinforced plastic sprayer with nylon or chrome plated brass hose
Mounting Hole: 1-1/16 in.
Shipping Weight: 4 lbs.
*The "P" within the part number indicates retail packaging
Flow-Max™ Ball Scupper - ClearReplace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.Features:
Replaces worn out flapper scuppers
70% more drainage than competitive models
Twist off for easy cleaning
Retrofits all hole patterns
The seal is slotted to fit over 1-1/4" motor well tubes
3” Diameter x 2-1/2” H
The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it. They will be different for every boat depending on the hull thickness but you will need a flat head screw. Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.
White Vertical Cup & Cap for Scandvik Part Number 1075This is a white replacement cap and cup for the vertically mounted recessed showers. This part is a kit (one #10030 cap and one #10031 cup).Features:
These showers are typically mounted on the side of a center console or any vertical surface
You can distinguish the vertically mounted unit by the Scandvik logo on the cap
Specifications:Mounting Hole: 2-1/4 in.*The "P" within the part number indicates retail packaging
Recessed Shower with 6' White Hose - Push-ButtonThis part is part of the fifth generation of Scandvik recessed showers. Also, this recessed shower has an easy-to-use push-button.Features:
White handle, cup, and cap with a 6 ft. white hose
Improved UV protection and a better water seal when the cap is closed
Built-in grab ring for easy deployment
Mounts vertically or horizontally
Mounting hardware is included
Specifications:
Water connection: 3/8 in. BSP-F threaded fitting
Material: ABS and chrome-plated brass (push-button)
Mounting Hole: 2-3/4 in.
Shipping Weight: 4 lbs.
*The "P" within the part number indicates retail packaging
PUREWATER+All-In-One Water Filtration System 5 Micron Replacement FilterFeatures:
Simple filter change by twisting off faucet head simply dropping filter into cartridge without crawling under sink
On-demand ultra-clean tasting water from your tank
Elegantly styled
Simple to install
Compact filter housing maximizes under sink storage
4-Blade Chopper Kit with Lock Nut for 18590 Series Macerator PumpsThe Jabsco 4-Blade Chopper Kit replaces a worn, broken, or malfunctioning macerator chopper in the 18590 Series. The chopper is designed with 4 heads, each with its own blade to break up large debris before it enters the pump and other fluid lines. Includes a lock nut to secure it in place.