Marine Plumbing & Ventilation - Accessories

TastePURE Drinking Water Freshener - 16oz BottleCamco TastePURE Drinking Water Freshener helps to eliminate algae and slime from your drinking water tank. Just 1 ounce for every 20 gallons of water helps remove bad smells and tastes. Features: Prevents algae and slime buildup from RV drinking water tanks Just 1 oz. helps remove bad smells and taste from 20 gallons of water Keeps stored fresh water tasting and odor free 16 oz. bottle Easy to use

Read more less

U-Lube Cartridge - 3oz. *2-PackU-lube is a long lasting waterproof grease specially formulated to lubricate and protect internal ball valve components, and to discourage nuisance marine growth.  U-lube's tacky texture keeps it where it is applied, and helps provide maximum protection against wear, rust, and water washout in non-ball valve applications such as bushings and bearings exposed to wet conditions and a wide range of temperatures.For ball valve applications a zerk fitting replaces the drain plug, enabling U-lube to be injected into the cavity between the valve body and the ball while the valve is in the OPEN position. The approximate volume of grease required to fill GROCO ball valves and the grease volume for other valve brands will be similar.Features: Size: 3 oz. 2-Pack

Read more less

Service Kit f/18590 Macerator PumpsFor older pumps with brass studs, washers and acorn nuts**Stainless Steel Bolt Kit - (17288-1000) sku-56848 - must be purchased**WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 3"H x 5"W x 5"L WT: 0.5 lbs UPC: 671880015349 Brochure (pdf)

Read more less

Low Profile Drain Stopper - 1" OutletThis stopper fits a 2-1/16 in. - 2-1/4 in. drain hole with a 1 in. hose barb outlet. Also, it requires 2" of clearance below the sink.Specifications: Flange Diameter: 2-3/4 in. Strainer Diameter: 2-3/4 in. *The "P" within the part number indicates retail packaging

Read more less

Pumphead Kit for 4148 Series Aqua King™ II Premium 4.0 PumpsThis Shurflo pump head replacement is for 4148 Series Aqua King™ II Premium 4.0 pumps listed below: Aqua King™ II Premium 4.0 (4148-153-A75 [4148-153-E75]) Aqua King™ II Premium 4.0 24 VDC (4148-163-A75 [4148-163-E75]) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

KlickTite 2 x 90 - 3/4" HoseAllows draining of the system quickly and effortlessly. 

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 1.28"-1.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 1" Hose Outer Diameter (inch): 1.28" to 1.59" Quick Guide (pdf)

Read more less

Cartridge Motor - 500GPH - 24VUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Heavy-duty motor with stainless steel shaft for 500 GPH pumps, 24V. Featrues: 24V, 500GPH replacement/spare motor cartridge for Johnson bilge pumps Upgrade the output of the bilge pump in a few minutes by simply replacing the cartridge Cleaning debris from the impeller has never been simpler or easier

Read more less

Bilge Enclosed Pump Float SwitchEnsure your boat's safety and efficiency with the T-H Marine Bilge Pump Float Switch, designed for automatic activation of your bilge pump. Built for durability in harsh conditions, this reliable float switch integrates easily into your existing system. Specifications: Type: Switches Box Dimensions: 3"H x 3"W x 6"L WT: 0.4 lbs

Read more less

Flexible Adaptor 1-1/2" F to 3/4"1-1/4" F to 3/4" - 1" Hose Barb

Read more less

Drain Valve Lubricant - Bilingual - 24oz Features: Prevents sticky valves Restores operation Coats plumbing lines for smooth tank outflow Works in both grey and black water tanks Lubricating additive This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - 5/8"–15/16" Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15/16"  / (mm) 15-24 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less