Marine Plumbing & Ventilation - Bilge Pumps

Float SwitchPart #: 4202-7Converts bilge pumps to fully automatic operation. Maximum amp draw is 12 amps (at 12-volt D.C.) or 6-amps (at 24-Volts D.C.). Features a compact, low profile design that mounts on any surface from a horizontal up to a 24x angle. Incorporates a reliable and affordable mechanical switch that actuates pump motor at 2" water level. Wire leads do not flex or hinge with the float as on some competitive models. Integral cover dampens bilge sloshing to reduce pump cycling, and prevents debris interference. Sealed switch mechanism resists moisture, fume-ignition, and electrical shock. Contains no mercury, which is listed as a health hazard and "Persistent Toxic Substance" in over 26 states.Float switch installs directly onto the rear slots of the V-Series pump bracket. Features a convenient test knob to test pump operation.Features: 36" Wire 12V & 24V CE Rated WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs UPC: 022697420275 Quick Guide (pdf)

Read more less

Cartridge Bilge Pump 1250 GPHThe 1250 GPH incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel.CE-ApprovedFeatures: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 60 l/min - 952 GPH Capacity Straight: 73 l/min - 1150 GPH Amerpage: 3 A Fuse Size: 5 A Connection: 1 1/8"" Max Height: 112 mm - 4.4" Weight: 0.32 kg - 10.4 oz. Specifications: Type: Electric Gallons Per Hour: 1250 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Box Dimensions: 4"H x 6"W x 7"L WT: 0.9 lbs UPC: 729321421232 Owner's Manual (pdf)

Read more less

500 GPH Cartridge Combo Series 12VCombines the line of cartridge bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.CE-ApprovedFeatures: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: Thermoplastic Shaft Seal: Lip seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH Capacity straight (13.6 V): 40 l/min - 630 GPH Amperage: 2.5 A Fuse Size: 5 A Connection: 3/4" Specifications: Gallons Per Hour: 500 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 7"W x 8"L WT: 1.1 lbs UPC: 729321055031

Read more less

500 GPH Ultima Combo Automatic Submersible Bilge Pump 12VJohnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump.CE-ApprovedFeatures: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 33 l/min - 525 GPH Capacity straight (13.6V/27.2V): 40 l/min - 630 GPH Amperage: 2.5 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz. Specifications: Gallons Per Hour: 500 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 7"W x 7"L WT: 1 lbs UPC: 729321075039 Owner's Manual (pdf)

Read more less

Heavy Duty Bilge Pump 1600 series 12v:The best choice when you are looking for high performance, heavy duty pumpsdesigned to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included.CE-ApprovedFeatures: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH Amperage: 7 A Fuse Size: 10 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 149 mm - 5.86" Weight 1.3 kg - 2.75 lbs Specifications: Gallons Per Hour: 1600 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 6"W x 6"L WT: 3.4 lbs UPC: 729321160049

Read more less

Rule 3700Non-Automatic 32vHeavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet.FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 3700 GPH Operation: Non-Automatic Outlet Size: 1-1/2" Volts: 32v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 5.8 lbs UPC: 042237083500 Owner's Manual (pdf)

Read more less

Rule 3700Automatic 12vHeavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet.WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 3700 GPH Operation: Automatic Outlet Size: 1-1/2" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 12"L WT: 7.5 lbs UPC: 042237083050 Owner's Manual (pdf)

Read more less

Rule 2000Non-Automatic 12v, UL listed w/ 6' wire leadsEngineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet.FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 5"W x 7"L WT: 3.15 lbs UPC: 042237085160 Owner's Manual (pdf)

Read more less

Rule-A-Matic® Float Switchw/ Fuse HolderYear after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 Amps. Now includes a 2 year warranty.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12, 24, 36v Type: Switches Box Dimensions: 4"H x 5"W x 9"L WT: 0.4 lbs UPC: 042237095466 Owner's Manual (pdf)

Read more less

Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Computerized operation - no float switch required Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 2000 GPH Operation: Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 12"L WT: 4 lbs UPC: 042237083159 Owner's Manual (pdf)

Read more less

Shower Drain and Bilge PumpRobust Single Diaphragm Design Sink & Shower Drain PumpFlow rate: Nominal 16 Litres/min (4.2 US gallons/min)Self-priming from dry up to 3m (10ft)Features: Flexible installation No filter required Compact and simple design Dry running capability Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard Built to ISO 15083 Specification Meets BSEN 50081 (Electro Magnetic Compatibility) WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.2 GPM Inlet Size: 3/4" Outlet Size: 3/4" Suction Lift (ft.): 10' Volts: 12v Type: Shower Drains Box Dimensions: 6"H x 8"W x 14"L WT: 6.65 lbs UPC: 671880581561 Owner's Manual (pdf)

Read more less

31705 Bilge and Shower Drain PumpBilge/Livewell/General Purpose Diaphragm PumpFeatures: 12v Self-Priming from dry up to 2.4m (7.8ft) Run dry without damage Smooth flow Four piston, diaphragm pump Powerful heavy duty motor with Thermal Overload Protection Snap-in Ports Waterproof coating Meets USCG Regulation 183.410 and EN ISO 8846 MARINE (Ignition Protection Standards) Meets EN 50081-1 Electro-magnetic Compatiblity Complies with EN ISO 8849 MARINE Electric Bilge Pump WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 258 GPH Gallons Per Minute: 4.3 GPM Inlet Size: 3/4" Suction Lift (ft.): 7.8' Volts: 12v Type: Shower Drains Box Dimensions: 5"H x 7"W x 14"L WT: 6.6 lbs UPC: 671880522588 Owner's Manual (pdf)

Read more less