Marine Plumbing & Ventilation - Bilge Pumps

PWC 500 GPH Automatic PumpIn the next generation sensing bilge pumps, the 500 GPH S-Series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8". Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. Rule has true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. These are the smallest automatic pumps on the market.Features: Completely automatic with manual override; no float switch needed Submersible and ignition protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Box Dimensions: 4"H x 7"W x 7"L WT: 1.1 lbs UPC: 042237106384

Read more less

500 GPH Standard Bilge Pump Kit with Float Switch - 12VFeatures: Completely submersible 500 GPH/1893 LPH Ignition protected Mercury-Free Switch Stainless Steel Shaft High Abrasion, Tin Coated Silicone Blocked Wire Includes Back Flow Preventer 3-Year Warranty Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Volts: 12v Box Dimensions: 3"H x 8"W x 9"L WT: 1.2 lbs UPC: 042237106513

Read more less

Rule-Mate® 800 Fully Automated Bilge Pump - 12VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 800 GPH/3028 LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Operation: Automatic Gallons Per Hour: 800 GPH Volts: 12v Box Dimensions: 4"H x 7"W x 9"L WT: 1.2 lbs UPC: 042237106223

Read more less

Side Mount Bracket for Newer 360-1100 GPH Rule PumpsThe Rule Side Mount Bracket is made specifically for newer 360-1100 GPH Rule Pumps. Specifications: Type: Misc Gallons Per Hour: 360-1100 GPH Box Dimensions: 3"H x 6"W x 7"L WT: 0.15 lbs UPC: 042237106643

Read more less

360 GPH Standard Bilge Pump Kit with Float Switch - 12VFeatures: Completely submersible 360 GPH/1362 LPH Ignition protected Mercury-Free Switch Stainless Steel Shaft High Abrasion, Tin Coated Silicone Blocked Wire Includes Back Flow Preventer 3-Year Warranty Specifications: Type: Electric Gallons Per Hour: 360 GPH Operation: Automatic Volts: 12v Box Dimensions: 3"H x 8"W x 9"L WT: 1.2 lbs UPC: 042237106520

Read more less

Rule-Mate® 500 Fully Automated Bilge Pump - 12VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 500 GPH/1893LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Operation: Automatic Gallons Per Hour: 500 GPH Volts: 12v Box Dimensions: 4"H x 7"W x 9"L WT: 1.1 lbs UPC: 042237106230

Read more less

Standard Submersible Electric Galley Pump - 12VWhale's standard 12V submersible electric pump.Features: White 10 Liters 12V Specifications: Type: Electric Volts: 12v Box Dimensions: 2"H x 5"W x 6"L WT: 0.35 lbs UPC: 766478942081

Read more less

High Flow Submersible Electric Galley Pump - 12VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse molded parts and robust motors.Whale has developed the pump designs based on more than 60 years of expertise. Today Whale has used that experience to develop the most compact, quiet, lightweight high performance electric galley pumps.Features: Simple and compact High flow submersible Ideal for up to 2/3 mixer outlets 15.8 liters per minute maximum flow rate 3.8 Amps power consumption 12V Specifications: Type: Electric Volts: 12v Box Dimensions: 2"H x 8"W x 10"L WT: 0.5 lbs UPC: 766478942173

Read more less

Submersible Electric Galley Pump - 12VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse molded parts and robust motors.We have developed our pump designs based on more than 60 years of expertise. Today we have used that experience to develop our most compact, quiet lightweight high performance electric impeller pumps.Features and Benefits Simple, compact and an economical solution Long life, very quiet with low power consumption An inexpensive way to update a manual to an electric system Suitable for use with pressure switch and microswitch systems Specifications: Volts: 12v Outlet Size: 3/8" Type: Electric Gallons Per Minute: 3.48 GPM Box Dimensions: 2"H x 7"W x 10"L WT: 0.5 lbs UPC: 766478942159

Read more less

Bilge Pump Heavy Duty 2250 GPH - 24VSubmersible heavy duty bilge pump 24V with pump capacity 140 L/min (2250 GPH) and 120 L/min (1900 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. Features: Heavy Duty Submersible For pleasure or commercial boats above 12m (36 Ft) length. Interchangeable with Rule 2000, Johnson Pump 22084/32-2200-02 Specifications: Weight: 0.9 kg/1 lb Dimsensions: 150/6L x 170/6.7H x 130/5W mm/in  Fuse: 4,5A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 2250 GPH Gallons Per Minute: 37 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 24v Box Dimensions: 6"H x 7"W x 8"L WT: 4.5 lbs UPC: 7340176600134

Read more less

Bilge Pump Heavy Duty 1750 GPH - 24VSubmersible heavy duty bilge pump 24V with pump capacity 110 L/min (1750 GPH) and 85 L/min (1350 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. Features: Heavy Duty Submersible For pleasure or commercial boats above 10m (30 Ft) length  Interchangeable with Rule 1500, Johnson Pump 16084-00/32-1600-02 Specifications: Weight: 0.7 kg/1 lb Dimensions: 150/6L x 170/6.7H x 130/5W mm/in  Fuse: 3A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Type: Electric Gallons Per Hour: 1750 GPH Gallons Per Minute: 29 GPM Operation: Non-Automatic Outlet Size: 1-1/4" or 1-1/2" Volts: 24v Box Dimensions: 6"H x 7"W x 8"L WT: 4.6 lbs UPC: 7340176600110

Read more less

1100GPH Electronic Sensing Bilge Pump - 24VIn the next generation sensing bilge pumps, the 1100GPH 24V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8" Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!! Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Automatic Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 1.2 lbs UPC: 042237104816

Read more less