Marine Plumbing & Ventilation - Bilge Pumps

PWC 500 GPH Automatic PumpIn the next generation sensing bilge pumps, the 500 GPH S-Series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8". Improved design and performance means that our new 500 GPH pump will produce this flow at just 12 volts rather than 13.6 volts as previously required, more typical of on board voltage supply. Our next generation of Rule pumps include check valves and to do this we've created a hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks. Rule has true electromagnetic suppression (EMC) and have a built-in thermal cell that protects the pump and the vessel when things get too hot. These are the smallest automatic pumps on the market.Features: Completely automatic with manual override; no float switch needed Submersible and ignition protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Box Dimensions: 4"H x 7"W x 7"L WT: 1.1 lbs UPC: 042237106384

Read more less

Ultima SwitchNew digital technology uses the Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by water and fluids. Detector cells are totally sealed, are never in contact with the water, will not corrode and are not affected by oil or foreign debris.ULTIMA activates at a 50 mm (2") fluid level and deactivates at a 20 mm (3/4") fluid level. A 3 second delay prevents false starts. ULTIMA switch is rated to handle all Johnson Pump submersible pumps pumps up to 20 amps at 12 or 24 volts.Features: No moving parts Totally sealed solid state electronics and field detectors No mercury No exposed sensors eliminate corrosion possibilities Unique 3-way switch disables piezo alarm while keeping warning LED lit Environmentally sensitive Specifications: Volts: 12v Type: Switches Box Dimensions: 3"H x 6"W x 9"L WT: 0.3 lbs UPC: 729321363037 Owner's Manual (pdf)

Read more less

Replacement Strainer BaseReplacement Strainer Base f/Round Rule Pumps w/Flow Rate 2800-3700gphWARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Strainers Box Dimensions: 4"H x 8"W x 9"L WT: 0.25 lbs UPC: 042237085641

Read more less

Orca Auto 1300 12V Automatic Bilge PumpOrca Family - compact and powerful electric bilge pumps designed to be installed deep in the bilge.Features and Benefits Compact powerful submersible electric bilge pumps - with large filter base to ensure maximum surface area exposed to bilge water. High performance Compact design- fits in small spaces in the bilge Low amp draw means long battery life Efficient design - Large filter base ensures maximum surface area exposed to bilge water Simple installation- Multiple wire locations, extra long wires Easily maintained- Access to motor cartridge and filter area Reliability - Robust ABS fuel-resistant housing WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1300 GPH Operation: Automatic Outlet Size: 1" or 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 9"W x 10"L WT: 2.3 lbs UPC: 766478946409

Read more less

500GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 500GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104717 Brochure (pdf)

Read more less

1000 Bilge Pump - 12 VDC, 1000 GPHQuality bilge pumps you can trust. SHURFLO's bilge pumps are built for the harsh marine environment to withstand the toughest conditions. Standard with 3' tinned wire assembly for below waterline installations and water cooled motors for extended life.Features: 3' Tinned Wire Assembly Anti-Airlock Tough Nylon Housing Ignition Protected Water Cooled Motors - Extended Life 3 Year Warranty CE Listed This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Operation: Non-Automatic Gallons Per Hour: 1000 GPH Type: Electric Box Dimensions: 3"H x 6"W x 9"L WT: 1.1 lbs UPC: 752324010103

Read more less

Grey IC Waste Pump 24VUnique Intelligent Control means Gulley IC Kit is all you need to manage waste from multiple drains through one pumpElectrical signals are sent from the Two Way Manifold IC only when grey waste water needs to be pumped outComplete prewired grey waste system that handles waste from multiple drains using the high capacity Gulper IC pump.Features and Benefits Senses waste level through wall - not in contact with water Quiet drainage Removes the need to install a bulky grey waste tank Service free - No moving parts to clog or burn Fully potted circuitry - protected against water ingress WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Waste Pumps Gallons Per Minute: 4.5 GPM Inlet Size: 3/4" or 1" Operation: Automatic Outlet Size: 3/4" or 1" Suction Lift (ft.): 3' Volts: 24v Operation Method: Automatic Box Dimensions: 6"H x 8"W x 12"L WT: 5.6 lbs UPC: 766478945723 Brochure (pdf)

Read more less

3-Way Auto/Off/Manual Bilge Pump SwitchPart #: 7615A3Panel-mounted rocker switches for use with pump that draws 10 amps or less.Features: 1/4" spade terminals 6-volt through 32-volt D.C. only 10 amps maximum Plate is 2-13/16" x 1-7/8" Hole size is 1-1/2" x 7/8" Caution: Bilge pump switches are not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12/24v Type: Switches Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs UPC: 022697761590 Quick Guide (pdf)

Read more less

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 1200 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 12V Fuse Size: 5 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 1" and 1-1/8" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 1200 GPH Gallons Per Minute: 20 Operation: Non-Automatic Outlet Size: 1" or 1-1/8" Type: Pumps/Drives Volts: 12v Box Dimensions: 4"H x 5"W x 7"L WT: 1.25 lbs UPC: 022697024152 Quick Guide (pdf)

Read more less

Automatic Submersible Bilge Pump - Electromagnetic Switch01604-00 Heavy-Duty, high-performance pump Exceeds the tough demands of commercial and recreational duty Liquid Cooled 12-Pole motor with double ball bearings Lip Seal design construction Prewired with automatic float switch(with Manual Over-ride Operation) Optional and removable check valve included 1-1/8" & 1-1/4" hose adapters included 3 year warranty Specifications: Gallons Per Hour: 1600 GPH Operation: Automatic Outlet Size: 1-1/8" or 1-1/4" Volts: 12v Type: Electric Box Dimensions: 8"H x 8"W x 8"L WT: 4.25 lbs UPC: 729321916608

Read more less

Rule 3700Automatic 12vHeavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet.WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 3700 GPH Operation: Automatic Outlet Size: 1-1/2" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 12"L WT: 7.5 lbs UPC: 042237083050 Owner's Manual (pdf)

Read more less

Ultima Bilge PumpUltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port. For UltimaBilge 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port. All version are delivered with a removable check valve.The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.CE-ApprovedFeatures: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 51 l/min - 800 GPH Capacity straight (13.6 V): 79 l/min - 1250 GPH Amperage: 3 A Fuse Size: 5 A Connection: 1-1/8" and 1-1/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:117 mm - 4.6" Weight:0.66 kg - 23.3 oz. Specifications: Gallons Per Hour: 1250 GPH Operation: Automatic Outlet Size: 1-1/4" or 1-1/8" Volts: 12v Type: Electric Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs UPC: 729321472616 Owner's Manual (pdf)

Read more less