Marine Plumbing & Ventilation - Fittings

Flush Pro Valve - 1-1/4"Finally! Freshwater flushing of your inboard is as simple as connecting a garden hose.Features: Polymer Stainless Steel Spring Flush your boat engine safely and easily Transparent body allows for visual inspection of water flow Durable check valve system activated by water pressure from a garden hose Check valve automatically shuts off hull intake when water pressure is applied Adapter supplied with Flush Pro make winterizing your boat easy Can be used with on board generators Available for Standard 1-1/4" Hose Sizes Owner's Manual (pdf)

Read more less

1-1/4" NPT x 1-1/8" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow ElbowFeatures: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 3"W x 4"L WT: 0.65 lbs UPC: 742985097162

Read more less

2" NPT x 2" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow ElbowFeatures: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 3"W x 4"L WT: 1.4 lbs UPC: 742985005037

Read more less

1" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 5"L WT: 1.2 lbs UPC: 742985143951

Read more less

1" #316 Stainless Steel NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models Specifications: Construction: Stainless Steel Box Dimensions: 4"H x 4"W x 5"L WT: 1.3 lbs UPC: 742985143449

Read more less

1" NPT x 1-1/8" Bronze Full Flow Pipe to Hose Straight FittingFeatures: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 2"W x 3"L WT: 0.3 lbs UPC: 742985141933

Read more less

Diverter Y Valve with FittingsRaritan’s Diverter Y-Valve allows for easy installation as it can be configured using any port as input. Port connections are National Pipe Thread allowing the use of the many stock fittings available in local marine and hardware stores.The flexibility of configuring each port with a different fitting allows the installer to easily connect to hoses without having to run new lines or change runs just to enable the connection. The body is constructed of ABS and allows a full flow of water through the valve body.This full-flow design helps to eliminate some of the common problems caused by a restriction in the line created by Y-valves. The valves do allow re-configuration of which ports are open or closed in the event the valve must be rotated a certain way for proper installation.In addition, Raritan supplies labels to place on the mounting straps so that the port is clearly labeled as to where the flow is directed. To satisfy No Discharge regulations the valve must be directed to a holding tank while in a No Discharge Zone and the handle removed. The handle easily detaches by simply lifting it up.Features: Full flow Diverter Y Valve The valve body is constructed of durable, high-strength ABS Any port can be easily configured as an Input All female ports are standard 1 ½ National Pipe Thread (NPT) A removable handle helps satisfy No Discharge Zone requirements Mounting clamps are included for easy bulkhead mounting Labels included for clear port identification WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

O-Ring S/T Pump KitThis set of 2 "O" rings will fit both S and T pumps that have 8 screws connecting the top and bottom together. *Sold as a PairWARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Plastic Box Dimensions: 1"H x 1"W x 4"L WT: 0.1 lbs UPC: 087735104401

Read more less

1-1/2" Hose Barb Stainless Straight Deck Drain Features: Scuppers are installed flush with the deck and have a removable drain. #316 Stainless Steel Thru Deck Drain with Bronze Hose Connection Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 10"L WT: 2.4 lbs UPC: 742985175136

Read more less

Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: A barbed hose fitting connects 3/4 in. inside-diameter tubing Standard hose threads with a protective cap that has a retaining strap are standard Chrome-plated ABS flange Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4 in. marine hose Protective cap with retainer The flange dimension is 2-1/4 in. OD Installation in a 1-1/4" hole Straight fitting with shutoff valve

Read more less

T-Handle Brass Drain Plug - 1" DiameterThe T-Handle Drain Plugs are simply operated by a clockwise and counterclockwise turn of the T-handle, which expands and releases the drain plug.Features: Handle: Brass For 1" diameter drains *Sold as an Individual Specifications: Construction: Brass Box Dimensions: 1"H x 2"W x 6"L WT: 0.1 lbs UPC: 022697752673 Quick Guide (pdf)

Read more less

Livewell/Bailer Drain Plug - 1/2"A clockwise turn of the handle tightens the plug and the lever flips down to lock. This plug is ideal for livewell drains.Features: Cam-action neoprene plugs snap shut to form a stopper for livewells/baitwells Brass snaps and plates 1/2" inner diameter thru-hull *Not for use with chemicals or fuels Specifications: Construction: Brass Box Dimensions: 2"H x 2"W x 5"L WT: 0.1 lbs UPC: 022697753335 Quick Guide (pdf)

Read more less