Marine Plumbing & Ventilation - Fittings

Hose AdapterReplacement Garden Hose Adapter

Read more less

Garboard Drain w/Inside T-Handle Plug The ConceptBronze Garboard DrainOnce your boat is in its cradle, sling, lift, or trailer, draining the bilge is easy with a garboard drain. All models install from the outside.

Read more less

1" NPT x 1-1/8" ID Bronze Full Flow 90° Elbow Pipe to Hose FittingFeatures: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" Full Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 4"W x 4"L WT: 0.55 lbs UPC: 742985141940

Read more less

1/2" NPT #316 Stainless Steel In-Line Ball ValveFeatures: 1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves) Thumb-release locking mechanism assures the valve remains in the position selected 1000 WOG rated #316 SS body #304 SS handle and trim Bonding attachment PTFE seats and seals UL listed for fuel or water Full flow Fits IBVF-S for Seacock Application Specifications: Construction: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.7 lbs UPC: 742985139930

Read more less

1" Bronze Flanged Full Flow SeacockFeatures: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands Selectable handle rotation Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves Full flow C84400 bronze construction Stainless steel ball and stem PTFE seats and seals Serviceable while installed Base has bonding attachment UL Listed 647B Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 10"L WT: 4.45 lbs UPC: 742985002333

Read more less

1201R 3/4" Port - 90° BarbPort Fitting - 19mm (3/4") 90° Hose Barb

Read more less

2-1/2" Safety Seacock w/2" Side Port Features: Two driver ports permit handle relocation. NPT threaded side port accepts SSCV or any NPT threaded accessory. Handle has square hole that accepts standard ratchet; helps access hard-to-reach valves, or ease actuation of hard-to-operate valves. Full flow. Serviceable while installed. C84400 bronze construction. Stainless steel ball and stem. Base has bonding attachment. PTFE seats and seals.   ***Add a GROCO Bilge Strainer to pump out remote bilge locations.  

Read more less

1-1/4" NPT x 1-1/8" ID Bronze 90 Degree Pipe to Hose Fitting Standard Flow ElbowFeatures: 90 degree Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 5" Standard Flow UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 2"H x 3"W x 4"L WT: 0.65 lbs UPC: 742985097162

Read more less

1" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 5"L WT: 1.2 lbs UPC: 742985143951

Read more less

1" #316 Stainless Steel NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models Specifications: Construction: Stainless Steel Box Dimensions: 4"H x 4"W x 5"L WT: 1.3 lbs UPC: 742985143449

Read more less

1-1/2" Hose Barb Stainless Straight Deck Drain Features: Scuppers are installed flush with the deck and have a removable drain. #316 Stainless Steel Thru Deck Drain with Bronze Hose Connection Specifications: Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 10"L WT: 2.4 lbs UPC: 742985175136

Read more less

Washdown Valve with Chrome BaseA bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. Features: A barbed hose fitting connects 3/4 in. inside-diameter tubing Standard hose threads with a protective cap that has a retaining strap are standard Chrome-plated ABS flange Injection-molded, UV-stabilized, and rust-proof Standard garden hose thread outlet The inlet fits 3/4 in. marine hose Protective cap with retainer The flange dimension is 2-1/4 in. OD Installation in a 1-1/4" hole Straight fitting with shutoff valve

Read more less