Marine Plumbing & Ventilation - Transfer Pumps

Gear Lube PumpThis Attwood Gear Lube Pump offers a universal fit so it can be used with the greatest number of engines. This pump is intended for use with a 32-ounce gear lube bottle, and it fits nearly any outboard or sterndrive. It comes with 1 Yamaha adapter.Features: Fits nearly any outboard or sterndrive Easy to install Quick Guide (pdf)

Read more less

Siphon-Mate Siphon PumpSpecialty Transfer PumpSafety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle. Supplied with clear tubing to allow versatile application. Cut tubing for desired length of intake and discharge hose. When finished siphoning or pumping flammable liquids, be sure to drain siphon pump of liquid before storing. This pump not intended for transfer of liquid over 120 degrees F (49 degrees C) nor solvents that will attack PVC.Features Use for diesel, oil, water Length: 11-1/2" (28.4cm) Diameter: 1-1/4" (32mm) Lifts: 4 oz (.12 L) per stroke WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Manual Box Dimensions: 2"H x 9"W x 14"L WT: 1 lbs UPC: 021083000299

Read more less

Drill PumpsJabsco drill pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used. Pumps up to 3.5 gpm Self-priming to 3ft 1/4" diameter shaft Supplied with 3/4" garden hose thread port adapters WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 3.5 GPM Box Dimensions: 3"H x 6"W x 9"L WT: 0.7 lbs UPC: 671880012577 Quick Guide (pdf)

Read more less

17820 Oil Changer SystemThe Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 8"H x 12"W x 12"L WT: 10.95 lbs UPC: 671880529624 Owner's Manual (pdf)

Read more less

Gear Pump Oil Change Kit - 12V12V gear pump with oil change kit. Particularly suitable for oil change or removal/change in of other viscous liquids in tight spaces.Hose set 6mm and 8mm, hose connection, 1,8m wires, fuse and battery clamps included.Features: Self priming and can run dry Reversible flow direction and with pump body in PTFE  Reversible flow direction by changing polarity  For continuous duty Specifications: Weight: 0.4 kg/0.75 lbs Dimensions: 140/5.5L x 90/3.5H x 80/3.15W mm/in  Port Connections: 13 mm (3/8″)  Fuse: 6A fuse *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Reversible: Yes Volts: 12v Box Dimensions: 6"H x 8"W x 8"L WT: 4.1 lbs UPC: 7340176600974

Read more less

Standard Utility Pump - 12 VDC, 1.5 GPMIncorporating SHURFLO's advanced motor technology that includes thermal overload protection, the general purpose pumps are self-priming, easy to install and are extremely versatile.Features: 12 VDC Ignition Protected BUNA Valves CE 7' [2.1m] Prime Hose kit Included Uses: Winterizing, Oil Change and Liquid Transfers Specifications: Volts: 12v Gallons Per Minute: 1.5 GPM Box Dimensions: 5"H x 6"W x 11"L WT: 4.2 lbs UPC: 752324009190

Read more less

Sliding Vane Self-Priming Diesel Transfer Pump - 9 GPM & 24vDesigned for refueling small sizes diesel powered vehicles [typical tank sizes up to 200 litres (50 U.S. gallons)] from drums.Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity. .Features: Faster refueling - 35 litres/minute (9.5 U.S.GPM). High head capability - 6 meters (19 feet). Self priming up to 2.8 meters (9 feet). Vibration tested. • IP55 protected motor  Specifications: Temperature Range : -30°C to +40°C (-22°F to +104°F)  Pump Body : Aluminium  Rotor : Vectra  Vanes : PTFE Filled Ryton  Shaft : Steel  Seal : Nitrile  Lip Seal Ports : Vertical ½¨ BSP or 19mm hose adaptors (¾¨)  Motor : 24V permanent magnet, corrosion resistant IP55 protected  Duty : 25 mins @ +40°C (104°F) Current Draw: 7 Amps @ 3m head Maximum Current: 10 Amps Brochure (pdf)

Read more less

Submersible Electric Galley Pump - 24VWhale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse molded parts and robust motors.We have developed our pump designs based on more than 60 years of expertise. Today we have used that experience to develop our most compact, quiet lightweight high performance electric impeller pumps.Features and Benefits Simple, compact and an economical solution Long life, very quiet with low power consumption An inexpensive way to update a manual to an electric system Suitable for use with pressure switch and microswitch systems WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 3.48 GPM Operation: Non-Automatic Outlet Size: 3/8" Volts: 24v Type: Electric Box Dimensions: 2"H x 6"W x 7"L WT: 0.5 lbs UPC: 766478942166

Read more less

Rule 7700D GPH Evacuator Pump - 12VRule's latest Evacuator Pump is ideal for fast evacuation of water from a vessel. Long a favorite of tow boat operators, the 7700D is comprised of two 4000-gallon-per-hour pumps in tandem, with a net volume at open discharge is 7700 gallons per hour. No more hoping to start a gas-powered "crash" pump.  Just connect the two sets of power leads to a 12v battery and the pump starts working. A 3" discharge hose is required in this application.Features: High-capacity 12V Utility Pump Up to 7,700 GPH (29,148 LPH) Built-in backup: each pump can operate independently if necessary 3" Barbed discharge port Long power lead, ideal for setting up quick connections to power Specifications: Gallons Per Hour: 7700 GPH Operation: Non-Automatic Outlet Size: 3" Type: Pumps/Drives Volts: 12v Box Dimensions: 12"H x 12"W x 15"L WT: 13.65 lbs

Read more less

PIRANHA™ Ballast 1100 Pump - 12 VDC, 1100 GPHEverything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.Features: Flow Rate 1100 GPH Replaceable Cartridge Tough Nylon Construction Anti-Air Lock Feature Tinned 6 Feet Wire Assembly CE, Ignition Protected ISO 8846 Specifications: Volts: 12v Gallons Per Minute: 1100 GPH Box Dimensions: 3"H x 7"W x 9"L WT: 1.2 lbs UPC: 752324011919

Read more less

PIRANHA™ Ballast 800 Pump - 12 VDC, 800 GPHEverything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.Features: Flow Rate 800 GPH Replaceable Cartridge Tough Nylon Construction Anti-Air Lock Feature Tinned 6 Feet Wire Assembly CE, Ignition Protected ISO 8846 Specifications: Volts: 12v Gallons Per Minute: 800 GPH Box Dimensions: 3"H x 7"W x 9"L WT: 1.2 lbs UPC: 752324011902

Read more less

Inline Booster High Flow Electric Galley Pump - 12VThis high-performance whale pump fits inline to increase the flow rate.Features: The narrow design is ideal for dropping into the water tank  Compact, quiet, lightweight design for use with pressure switch and microswitch systems An inexpensive way to upgrade a manual water system  Also suitable for pumping diesel  Low power consumption  Specifications: Pump Type: Inline Weight: 015 kg (0.3 lbs.) Voltage: 12 VDC Recommended Fuse Size: 5 amps Cable Length: 1m (3 ft.) Hose Connection: Suitable for 10 mm (38 in.) or 13 mm (1/2 in.) flexible hose use WX1511B (stern adapter 11-15 mm) and connect WX1504 (15 mm (5/8 in.) equal straight Filter Included: No  Length: 129 mm (5-1/16 in.) Width: 36 mm (1-7/16 in.) Materials: Pump Body: ABS Seal: Nitrile Strainer: Polyurethane  Impeller: PBT Cable: PVC Performance: Discharge Head: Flow rate per minute/current draw @ 12VDC 0 m (0 ft.): 15.8 liters (4 US gallons) 3.8 amps 1 m (3 ft.): 14.8 liters (4 US gallons) 3.7 amps 3 m (10 ft.): 12.8 liters (3.5 US gallons) 3.5 amps  1 Year Warranty: CE certified ISO 88846 ISO 10133 ABYC H-23 IP67

Read more less