Marine Plumbing & Ventilation - Washdown / Pressure Pumps

Aqua Jet Wash Down Kit 5.2New 19 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5 meters (25') of coiled wash down hose all in one package. Aqua Jet wash down pump kit makes it easy to add a wash down pump to any boat.CE-ApprovedFeaures: Whisper quiet operation Five-chamber construction Smooth flowing Self-priming Easy, low cost maintenance Quick-connect hose Long service life Connection: 1/2" NPT / hose 3/4". 3/4" GHT, Hose 3/4" GHT Bulkhead fitting - Inlet 3/4" hose, outlet 3/4" GHT Specifications: Gallons Per Minute: 5.2 GPM Max PSI: 70 Volts: 12v Box Dimensions: 9"H x 11"W x 19"L WT: 10.4 lbs UPC: 729321645348 Owner's Manual (pdf)

Read more less

AQUA KING™ II Standard Fresh Water Pump - 24 VDC, 3.0 GPMShurflo's 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, ensuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water automatic demand pump is quiet, thermally protected, and can run dry without damage.Features: 3901 replacement Sealed switch Sealed motor Corrosion-resistant electro-coated motor 4 independent chambers Built-in check valve Co-molded diaphragm Adjustable switch Self-priming up to 6 Feet Dry run capability Thermally protected Ignition-protected, CE Specifications: Voltage: 24 VDC Flow Rate: 3.0 GPM (11.35 LPM) Amps: 3.8 Shut-Off Pressure: 55 PSI (3.8 BAR) Specifications: Gallons Per Minute: 3 GPM Max PSI: 55 Volts: 24v Box Dimensions: 5"H x 6"W x 11"L WT: 5 lbs UPC: 752324012398 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Heavy Duty RV Water Pump with Strainer - 12V - 4GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 4 GPM (15 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Aqua Jet Wash Down PumpsThe new generation of wash down pumps - 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than ever before.As a wash down pump, the Aqua Jet offers much higher pressures than competitive models, making clean-up faster and easier than ever before.Complete with trigger nozzle, PUMProtector inlet strainer and hose connections for 1/2" hose. Both BSP and NPTconnections included in package.CE-ApprovedFeatures: Whisper quiet operation Five-chamber construction Self-priming Easy, low cost maintenance Quick-connect hose or threaded connectors available Inline strainer and trigger nozzle included as standard Long service life Capacity:20 l/min - 5.2 GPM Pressure Cut Off: 5 bar - 70 psi Fuse Size: 20 A Connection:1/2" NPT / hose 3/4", GHT 3/4" ; 3/8" BSP x 1/2" barb, Motor: WD 5.2 - 185 W, 12/24V DC Body: PA/PPA Valves: Nitrile Diaphragm: Santoprene Specifications: Gallons Per Minute: 5.2 GPM Max PSI: 70 Volts: 12v Box Dimensions: 6"H x 7"W x 11"L WT: 7.3 lbs UPC: 729321406079 Owner's Manual (pdf)

Read more less

Mag Drive Centrifugal Pump - 21GPM - 110V ACDesigned for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, Ice Makers, Hot water circulation, Livewell and Bait tank installations.Pump Head is manufactured in chemical resistant thermo-plastics - entirely non-metallic.UL listed, ignition and thermally protected fan cooled motor.Features: 21.13 GPM open Flow 110V AC 60Hz 3/4" NPT ports for easy connection 18 foot head WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 110v Gallons Per Minute: 21 GPM Box Dimensions: 7"H x 10"W x 11"L WT: 7.7 lbs UPC: 671880624299 Quick Guide (pdf)

Read more less

PRO BLASTER™ II Washdown Pump Ultimate - 12 VDC - 5.0 GPMSHURFLO's PRO BLASTER II washdown pump delivers superior performance that customers have come to expect and rely upon. Whether it's blasting away the grimiest decks clean, fish box scaling and anchor chain cleaning, SHURFLO's PRO BLASTER II washdown pump delivers high performance that provide a powerful consistent spray pattern. Built to withstand the marine environment with electro-coated motor, O-ring seals, fully sealed wire entries and can run dry without damage. Inlet strainer, 1/2" hose barb fittings and nozzle included. Ignition protected. Thermally protected.Features: 5901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 5 GPM Box Dimensions: 6"H x 6"W x 12"L WT: 8.25 lbs UPC: 752324011926

Read more less

Heavy Duty RV Water Pump with Strainer - 24V - 4GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 4 GPM (15 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Par-Max HD6 Heavy Duty Water Pressure Pump - 12V - 6 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 9 lbs UPC: 671880841979 Brochure (pdf)

Read more less

SHURFLO PRO WASHDOWN KIT™ II Ultimate - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' HoseSHURFLO's PRO WASHDOWN KIT II includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Ultimate 5.0), fittings, nozzle, raw water strainer and a 25' coiled hose.Features: Replaces 5901 Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 5 GPM Box Dimensions: 7"H x 12"W x 17"L WT: 11.8 lbs UPC: 752324012008

Read more less

Commercial Duty Water PuppyFlow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft)Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard). MotorPermanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump Port Type1/2" Internal Pipe Threads 1" External Hose Barb Adapter for 3/4 " External Garden Hose Thread included WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9 GPM Max PSI: 2.1-8.7 Volts: 24v Box Dimensions: 5"H x 6"W x 10"L WT: 6.9 lbs UPC: 671880532136 Owner's Manual (pdf)

Read more less

Mini Accumulator TankPart #: 30573-0003This accumulator tank is intended for installation in any pumped water system controlled by a pressure switch, and may also be used with air-driven pumps. The tank can serve as a storage vessel as well as a pulsation dampener for pressurized fluid. The accumulator tank smoothes water flow and reduces on/off switch cycling of the pump by lessening the variation in pressure and flow between the pump and the system discharge points.The even flow of water gives better control of hot water temperature with systems using instant water heaters.Features: Internal bladder Smoother flow Quieter water system Longer pump life Easily fitted to new or existing systems Compact size Quick-connect/disconnect port flttings Mounting point for optional pressure switch Food grade materials, NSF Standard 18 listed Volume: 21.5 oz Dimensions: 8.4 x 4.7 inches Max Pressure: 125 psi Weight: 0.96 lb Pre charged pressure: 10 psiWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Accumulator/Pressure Tanks Box Dimensions: 5"H x 8"W x 12"L WT: 1.35 lbs UPC: 671880582834 Brochure (pdf)

Read more less

HotShot HD5 Heavy Duty Washdown Pump Kit with 25' HoseCoil - 12V - 5GPM - 70PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (heavy-duty) models include a wider diameter motor with a powder-coated shell, cast aluminum endbells, and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy-duty, motors and cast aluminum lower housings which allow for long life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions are available which include a 25' (7.6m) HoseCoil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hose barb and GHT fittings 90° 20 mesh Quick Connect strainer Trigger nozzle & Quick Connect hose adapters

Read more less