Marine Plumbing & Ventilation - Washdown / Pressure Pumps

Commercial Duty Water PuppyFlow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft)Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard). MotorPermanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump Port Type1/2" Internal Pipe Threads 1" External Hose Barb Adapter for 3/4 " External Garden Hose Thread included WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9 GPM Max PSI: 2.1-8.7 Volts: 12v Box Dimensions: 5"H x 6"W x 10"L WT: 6.9 lbs UPC: 671880532129 Owner's Manual (pdf)

Read more less

Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 25 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 25 Gallons Per Minute: 3 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.85 lbs UPC: 671880841788 Brochure (pdf)

Read more less

Par-Max HD3 Heavy Duty Water Pressure Pump - 12V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 3 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 6.95 lbs UPC: 671880841832 Brochure (pdf)

Read more less

HotShot HD4 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 4 GPM - 60 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 12"W x 17"L WT: 10.4 lbs UPC: 671880841924 Brochure (pdf)

Read more less

Flipper Manual Galley Hand Operated PumpWhale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.Self priming Lever operated hand pump.Features Ideal for installing between two sinks- swivelling outlet Fine flow control Easy operation - Light back & forth pump action Suitable for fresh water and saltwater 7 ltrs capacity (1.85 US gals) per minute WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1.85 GPM Box Dimensions: 3"H x 7"W x 10"L WT: 0.6 lbs UPC: 766478041807

Read more less

RV Water Pump with Strainer - 12V - 3GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

King II Premium 4.0 24VDC 4.0GPM 55PSI Fresh Water Pressure Pump with Strainer & FittingsFeatures: Diaphragm Pump 4 Chamber  Aqua King II Premium 4.0 24VDC  Intermittent Duty Sealed Motor Up To 4.0GPM  Open Flow 55PSI  Adjustable Demand Switch and Adjustable Bypass 1/2” x 14 NPSM Male Threaded Ports Includes Two 1/2” Hose Barb Straight Swivel Fittings and a 50 Mesh Strainer That Connects Directly to the Pump Inlet Port 5.3 Amps Ignition Protected CE Rated Fresh Water Pump This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

BLASTER™ II Washdown Pump Kit - 12 VDC - 3.5 GPM w/25' Hose, Nozzle, Strainer & FittingsSHURFLO's 4338 series wash down pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all deck wash down plumbing systems. Designed as the next legendary pump to exceed the expectations of our customers, the BLASTER II Series pumps are designed for the toughest marine wash down applications. SHURFLO's quality reputation has been built on the reliability and dependability of every pump we build. The BLASTER II Series wash down automatic demand pumps are thermally protected and can run dry without damage. Fittings and nozzle included. Ignition protected.Features: 3901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor 4 Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 45 Gallons Per Minute: 3.5 GPM Box Dimensions: 6"H x 10"W x 17"L WT: 9.05 lbs UPC: 752324330065

Read more less

Pro Blaster II Ultimate 5.0 Washdown Pump - 24 VDC - 5.0 GPM - 60 PSIThe Shurflo Pro Blaster II Washdown Pumps deliver superior performance that customers have come to expect and rely upon.Features: Sealed switch Ignition protected Thermally protected Inlet strainer 2 each 3/4" hose barb fittings, 1 each 3/4" GHT (M) fitting Nozzle included [aftermarket models only] Specifications: Dimensions: 10” x 5” x 4.75” (254 x 127 x 120 mm) Voltage: 24 DC Flow Rate: 5.0 GPM (18.9 LPM) Amps (Max): 7 Shut-Off Pressure: 60 PSI (4.1 Bar) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Minute: 5.0 GPM Max PSI: 60 Volts: 24v Box Dimensions: 6"H x 7"W x 13"L WT: 8.1 lbs UPC: 752324011933 Quick Guide (pdf)

Read more less

AQUA KING™ II Supreme 5.0 (24VDC) Fresh Water Pump w/Strainer & FittingsSHURFLO®’s AQUA KING™ II Fresh Water Pumps are designed for boats with multi-fixtures providing “Just like home” shower pressure, and can operate at lower flow conditions without cycling. A built in mechanical bypass function enables these pumps to vary the flow rate for any on demand condition, without the need for an accumulator. With heavy duty motors built to withstand the tough marine environment these motors feature an electro-coated seamless shell motor, O-ring sealed end bells, and complete sealed wire entries on the motor shell and pressure switch. The AQUA KING™ II Fresh Water Pumps can run dry without damage. Inlet strainer and ½" hose barb fittings are included. (aftermarket models only). Ignition protected. Thermally protected. 3 Year WarrantyFeatures: Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-in Check Valve Co-Molded Diaphragm Adjustable Switch & By-Pass Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Specifications: 24 VDC 5.0 GPM [18.9 LPM] 7 Amps (Max.) 55 PSI [3.8 BAR] Intermittent Duty Multi-fixture Applications 1/2" NPS-M Inlet/Outlet This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gallons Per Minute: 5 GPM Max PSI: 55 Volts: 24v Box Dimensions: 6"H x 6"W x 12"L WT: 7.9 lbs UPC: 752324011896 Quick Guide (pdf)

Read more less

Pressure Storage Tank - 3.2 Gallon Drawdown A pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump. Specifications: Diameter: 15" Mounting: Stand 30/50 Drawdown: 3.2 gallon Thread NPT: 3/4"

Read more less

Bronze 17 GPM Centrifugal/Baitwell PumpFeatures: 17 GPM flow is ideal for baitwell circulation or any onboard pumping job that needs high GPM flow but relatively low pressure Inlet is threaded 3/4" NPT Discharge is threaded 1/2” NPT inside Garden hose adaptor is included Motor is "Ignition Protected" and has a #316SS shaft Continuous duty mechanical shaft seal CP-30 is identical to CP-20 except that it offers externally replaceable motor brushes Specifications: Gallons Per Minute: 17 GPM Box Dimensions: 5"H x 5"W x 10"L WT: 5.5 lbs UPC: 742985004788

Read more less