FW0814 WaterMaster Automatic Pressure Pump - 8L - 30PSI - 12VWaterMaster FW0814 is a pump from Whale with a compact sleek design that is easy to install and maintain.Features:
8L per minute flow rate
30PSI
12V
Internal pressure switch controlled (no external switching required)
Fully sealed protective motor housing
Completely integrated electronics
Runs dry without damage (within reason)
Includes a strainer to protect the pump from debris
Self priming upto 3m (10ft)
Easy installation - suitable for 15mm quick connect plumbing or 1/2" hosetails
Suitable for use with salt or fresh water
Quit operation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 2 GPM
Max PSI: 30
Volts: 12v
Box Dimensions: 6"H x 8"W x 10"L WT: 4.1 lbs
UPC: 766478946881
Mag Drive Centrifugal Pump - 11GPM - 110V ACDesigned for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, Ice Makers, Hot water circulation, Livewell and Bait tank installations.Pump Head is manufactured in chemical resistant thermo-plastics - entirely non-metallic.UL listed, ignition and thermally protected fan cooled motor.Features:
11.35 GPM open Flow
110V AC 60Hz
1/2" NPT ports for easy connection
18 foot head
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 110v
Gallons Per Minute: 11 GPM
Box Dimensions: 8"H x 10"W x 11"L WT: 6.8 lbs
UPC: 671880623148
Quick Guide (pdf)
Pressure Storage Tank - 1.4 Gallon Drawdown A pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump. Specifications:
Diameter: 11"
Mounting: Stand
30/50 Drawdown: 1.4 gallon
Thread NPT: 3/4"
Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Equipped with integrated bypass module to reduce cycling and provide smoother flow
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.13m/min)
Certifications: CE, ISO8846, RCM
Ingress Protection: IPX6
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12v
Max PSI: 40
Gallons Per Minute: 3 GPM
Box Dimensions: 6"H x 6"W x 15"L WT: 4.9 lbs
UPC: 671880841801
Brochure (pdf)
Pre-Pressurized Accumulator Tank - 24 oz.Specifically designed to be installed downstream of your pump, this tank helps reduce unwanted cycling, pulsation and pressure spikes, while helping to prolong pump life and save battery power. SHURFLO's accumulator tank uses a patented domed displacement diaphragm to minimize noise and power usage. This 24 oz. accumulator tank accommodates space constraints in your RV.Features:
Reduces Pump Cycling
Smooths Water Faucet Pulses
Pre-Pressurized to 30 PSI with Built-In Diaphragm
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Max PSI: 125
Type: Accumulator/Pressure Tanks
Box Dimensions: 5"H x 6"W x 11"L WT: 1.35 lbs
UPC: 752324009626
Wash Down Control - 12V - 2-Way On/OffSwitch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel in matt black finish has an integrated fuse holder and operating light. Fuses are not included.Features:
Enables automatic bilge pumping
Matte black finish
12-Volt 2-way on off controls
Fuses not included
CM90P7-1 13.6V CIRCULATION PUMP D20CM90 circulation pumps are a line of compact magnetic driven centrifugal pumps which combine high flow rates with very low electric current consumption. Suitable for fresh water, ethylene glycol and salt water circulation. Glass-fiber reinforced PPA body.Specifications:
System Pressure:-0.3 to 3.0 bar; stationary max. 4.0 bar
Liquid: Water/glycol mixture; max. 60% glycol, fresh and salt water
Motor service life: More than 5,000 hours at nominal voltage, 10,000 start/stops. Interchangeable motor
Dry running: 30 minutes
Dimensions: 244mm L x 120mm W x 150mm H
Weight: 6.6lbs
Capacity: 17.2 GPM
Ports: 3/4"
Specifications:
Gallons Per Minute: 17.2 GPM
Volts: 12v
Box Dimensions: 6"H x 8"W x 11"L WT: 6.7 lbs
UPC: 7330717013172
Blaster II Washdown Pump - 24 VDC - 3.5 GPM - 45 PSIThe Shurflo Blaster II Washdown Pump design was created with a unique over-molded single-piece diaphragm, ensuring long life and top performance in all marine washdown applications.Features:
Thermally protected and can run dry without damage
Sealed switch
Ignition Protected
2 each 3/4" hose barb fittings, 1 each 3/4" GHT (M) fitting
Nozzle included (aftermarket models only)
Specifications:
Dimensions: 9" x 4.9" x 4.1" (229 x 124 x 104 mm)
Voltage: 24 DC
Flow Rate: 3.5 GPM (13.2 LPM)
Amps (Max): 3.5
Shut-Off Pressure: 45 PSI (3.1 Bar)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gallons Per Minute: 3.5 GPM
Max PSI: 45
Volts: 12v
Box Dimensions: 5"H x 6"W x 11"L WT: 6 lbs
UPC: 752324012411
Quick Guide (pdf)
Par-Max 2 Water Pressure Pump - 12V - 2 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Equipped with integrated bypass module to reduce cycling and provide smoother flow
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.13m/min)
Certifications: CE, ISO8846, RCM
Ingress Protection: IPX6
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12v
Max PSI: 35
Gallons Per Minute: 2 GPM
Box Dimensions: 6"H x 6"W x 16"L WT: 4.9 lbs
UPC: 671880841764
Brochure (pdf)
Utility PumpThe 6050-Series pumps are the highest capacity, self-priming, portable Utility Pumps offered by Jabsco
Bronze pump head
23 GPM output at 10ft total head
Continuous duty motor with thermal over-load protection
Motor wired to operate with 115v and can be converted to 230v
Open drip proof motor
8' power cord with grounded plug
convenient carrying handle
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 23 GPM
Volts: 115v
Box Dimensions: 12"H x 12"W x 13"L WT: 28.75 lbs
UPC: 671880004374
Owner's Manual (pdf)