Heavy Duty Flexmount BlowerDC 250 CFM Flexmount Continuous Duty 4" Blower
Extended Life 5,000 Hour Motor
Tough Reinforced Thermoset Plastic Housing
Mounts to Any Flat Surface
Slip-On Inlet Ducting Connection
Efficient High Volume Air Flow
Low-Current Draw
Corrosion-Resistant Materials Throughout
N.M.M.A Type Accepted
Meets USCG Electrical Regulations to Title 33
Chapter I, Part 183
Subpart I and ISO 8846 for Ignition Protection
Complies with ISO 9097 Marine
CE Conforms with EN 5008-1 for Supression of Electro-magnetic interference
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Ducting: 4"
Open Flow (CFM): 250 CFM
Volts: 12v
Box Dimensions: 11"H x 12"W x 14"L WT: 7.1 lbs
UPC: 1067188052015
Owner's Manual (pdf)
Sea EraThe SeaEra was designed to fit in small spaces and allows users to rotate the base in 90 degree increments when the floor space is oddly shaped or was designed for a manual toilet with a pump and long base. The “original” SeaEra has an integral intake pump so all connections are at the toilet. The SeaEra with integral pump has some design features that separate it from the competition. Our design separates the intake water from the discharge water by the full length of the motor. This ensures no possibility of cross contamination. Similar competitive units have the intake and discharge only separated by a seal which means a seal failure allows waste water back into the bowl. Another feature is the full size joker valve which provides better performance and substantially reduces the probability of clogs. This original design is only available in the SeaEra which Is the macerating base with an integral intake pump. The SeaEra QC offers the option of a remote intake pump or pressurized fresh water solenoid.Engineering has developed a new built-in discharge fitting that can accept either 1-1/2" (38mm) or 1" (25mm) discharge lines without the need for an adapter. The SeaEra's discharge pump can handle a vented loop with a maximum height of five feet (1.52m) and utilizes a full-sized joker valve to help avoid clogging.The inlet pump can lift water from four feet (1.22m) below the toilet and can be run dry without damaging the pump. To simplify a new installation or a retrofit, water can be routed from either side of the inlet pump using interchangeable 3/4" (19mm) hose barb fittings (two straight and one 90 Degrees), which are included.Features:
Integral pump
Straight and 90º discharge
Household style bowl
Benefits
Uncompromising quality for the most demanding boaters
Economical electric macerating marine toilet
Simple and flexible installation for mounting above or below waterline
Bowl can be rotated 90 Degrees for mounting into confined spaces and retrofit mounting
Heavy-duty marine push-button switch included with all models
Pressurized freshwater models include vacuum breaker
Fits 1-1/2" (38mm) or 1" (25mm) discharge line with no adapters
Easy to clean and maintain
Can be run dry without damaging the pump
Low power consumption and quieter operation for on-board pressurized freshwater models
Can be used with on-board treatment systems (such as the Lectra/San®) and/or holding tanks
Each unit is assembled by hand, individually tested and backed by Raritan's one-year Limited Warranty and legendary technical support team
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: White
Gallons Per Minute: 3 GPM
Operation Method: Electric
Rinse Water: RAW
Suction Lift (ft.): 4'
Volts: 12v
Type: Toilet
Size: Household Size
Box Dimensions: 18"H x 23"W x 24"L WT: 30 lbs
UPC: 085462014253
Quick Guide (pdf)Brochure (pdf)
1" #316 Stainless Steel NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry. Features:
Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls
Accept standard thru-hulls into the base and standard in-line valves on top
Provide a safe and sturdy assembly when in-line valves are used as seacocks
For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later
Simplifies future valve replacement
C83600 Bronze and #316 SS models
Specifications:
Construction: Stainless Steel
Box Dimensions: 4"H x 4"W x 5"L WT: 1.3 lbs
UPC: 742985143449
RV Water Pump with Strainer - 24V - 3GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
3 GPM (11 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Sirocco II Elite Fan - WhiteThis revolutionary cabin fan is the finest in its class.The Sirocco II Elite is the world's first brushless DC cabin fan. Compared to the Sirocco II and other fans with conventional motors, the Elite's motor is designed to last up to four times as long. In addition to exceptional longevity, the fan offers an unmatched combination of build quality, airflow, whisper-quiet operation, and a four-year warranty. Beyond performance, the attractively designed fan will make a statement of sophistication in any galley, salon, or stateroom.Features:
Powerful, extra-long life brushless motor (est. 20,000 hours!)
4-Year Warranty
4 Speed settings
Whisper Quiet
360° Directional Airflow
12 and 24VDC (Auto-sensing)
Same mounting footprint as Sirocco and Sirocco II
30% increase in airflow across all speed settings compared to Sirocco II (110-240CFM)
Premium design with stainless steel grill and center badge
Gimbaled design for 360° directional airflow with 4-speeds
Auto shutoff with 4 timer settings of 3, 6, 9, or 12 hours
Made in Canada
Brochure (pdf)
Crown Head™ Front Cover with O-RingRaritan's Crown Head™ Front Cover includes the O-Ring.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Parts
Box Dimensions: 3"H x 4"W x 4"L WT: 0.1 lbs
UPC: 085462006050
Par-Max HD3 Heavy Duty Water Pressure Pump - 12V - 3 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features:
Co-molded diaphragm technology for long life and durability
HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures
Efficient and quiet operation
Integrated, sealed pressure switch for on-demand operation
Self-priming allows for installation versatility
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Equipped with integrated bypass module to reduce cycling and provide smoother flow
Specifications:
Motor design: Brushed, permanent magnet TENV
Pumphead upper housing material: Glass fiber reinforced polypropylene
Diaphragm: Co-molded TPV
Check valves: EPDM
Max inlet pressure: 30 PSI (2.1 Bar)
Fluid temperature range: 32°F – 140°F (0°C – 60°C)
Dry self-priming capability: 7ft min (2.13m/min)
Certifications: CE, ISO8846, RCM
Ingress Protection: IPX6
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12v
Max PSI: 60
Gallons Per Minute: 3 GPM
Box Dimensions: 6"H x 6"W x 15"L WT: 7 lbs
UPC: 671880841849
Brochure (pdf)
In-Line Non-return ValveNon-return valves help priming and prevent backflow of water into the bilge. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Inlet Size: 3/4"
Outlet Size: 3/4"
Type: Misc
Box Dimensions: 2"H x 4"W x 6"L WT: 0.2 lbs
UPC: 671880551397
Quick Guide (pdf)
Bilge Pump Water Alarm Panel with SwitchThis bilge pump water alarm panel with a switch provides both an audible and visual means of warning that the water level in your bilge is above your bilge pump float switch level. There is no need for a separate bilge pump switch, as the control switch selects between the automatic and manual (momentary on) functions of the bilge pump.Features:
20A fuse holder
Constructed of injection molded ABS
Installs with a gasket and four RH fasteners (included)
Specifications:
Length (inch): 4-11/16"
Width (inch): 2-3/8"
Width Between Fasteners (inch): 1-1/2"
Length Between Fasteners (inch): 3-7/8"
Volts: 12
Weight: 0.33 lb.
Color: Black
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Black
Box Dimensions: 3"H x 4"W x 7"L WT: 0.4 lbs
UPC: 035514423878
SHURFLO PRO WASHDOWN KIT™ II Deluxe - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' HoseSHURFLO's PRO WASHDOWN KIT II Deluxe includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Deluxe 4.0), fittings, nozzle, raw water strainer and a 25' coiled hose.Features:
Replaces 4903
Sealed Switch
Sealed Motor
Corrosion Resistant Electro
Independent Chambers
Built-In Check Valve
Co-Molded Diaphragm
Self-Priming up to 6 Feet
Dry Run Capability
Thermally Protected
Ignition Protected, CE
Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Max PSI: 60
Volts: 12v
Gallons Per Minute: 4 GPM
Box Dimensions: 6"H x 11"W x 18"L WT: 10.65 lbs
UPC: 752324011995
Aqua Series 500 GPH Replacement Cartridge MotorThis replacement cartridge can be used to upgrade the output of a pump or to simply replace existing Aqua Series pumps. Features:
500GPH replacement motor for Aqua Void Bilge and Aqua O2 Aerator pumps
Simple, two-handed twist and pull operation to remove and replace the motor cartridge
No tools required
Specifications:Pump Size: 500 GPH Specifications:
Type: Pumps/Drives
Box Dimensions: 3"H x 3"W x 5"L WT: 0.6 lbs
UPC: 7330717015220
Quick Guide (pdf)
TankAssure Tank Monitoring Sensor Kit (Sensor Kit Only)Introducing the Raritan TankAssure - a game-changing tank monitoring system that raises standards for marine vessels. Its easy-to-read display allows you to keep track of up to four tanks in one place making it an ultra reliable option. With its user-friendly interface and streamlined design this is truly next-level technology. Make sure a vessel has what it needs with the Raritan TankAssures unparalleled performance!TankAssure is a versatile solution that works with any polyethylene, fiberglass, or metal tank. Its submersible set-and-forget sensor makes installation easy while eliminating wire management issues. The low profile wall indicator ensures there are no protruding switches for an unobtrusive look on a vessel. TankAssures integrated Blocked Vent Detector technology guarantees efficient diagnosis of tanks along with effective odor control measures. With the Raritan App, you can monitor tank capacity remotely from anywhere aboard giving accurate readouts of its current level at all times. This feature allows users to stay informed about their vessel's fuel levels without having to physically check them manually.Features:
THIS KIT IS THE SENSOR KIT ONLY
Reliable electronic design perfected for any marine environment
Compatible with any polyethylene, fiberglass, or metal tank
Use it to monitor sewage, greywater, and freshwater
Integrated Blocked Vent Detector technology helps in quickly diagnosing holding tank venting problems
Seamless connection to the Raritan App, allowing you to monitor tank capacity from anywhere on a vessel
Get an exact percentage readout for each tank capacity using the Raritan App
N2K compatible with the 156300 NMEA2000 Adapter (sold separately)
Up to 4 tanks can be monitored with 1 control panel (This 15610 Sensor Kit with 1 inch fitting, is required for each additional tank)
Easy InstallationThe submersible set-and-forget sensor is designed to be dropped into either the top or side of the tanks; there is no need for external sensors or adhesives. This feature makes it incredibly convenient and easy to use. Say goodbye to complicated installation processes!The low-profile wall indicator boasts a sleek surface that eliminates any unsightly protruding switches. This feature makes it an excellent choice for those who prioritize style and functionality in their home decor.Simplify installation and wire management with minimal wiring. This feature makes it easy to set up a system without worrying about complicated cables or messy tangles. Say goodbye to cluttered spaces and hello to a clean, organized setup!Ease of UseThe electronic design is built to withstand any marine environment. Its flawless execution guarantees that it will operate smoothly no matter what conditions arise.Raritan's product is designed to work seamlessly with any polyethylene, fiberglass, or metal tank. Raritan made sure that compatibility wasn't an issue, so users could focus on what matters most: getting the job done right!This tool has proven itself to be a valuable asset in various industries where sewage, gray water, fresh water, diesel, and gasoline are present. Its versatility allows it to monitor all of these substances effectively, making it an essential part of any operations that require their presence. With its wide range of capabilities, this tool is truly indispensable for those who rely on accurate readings when dealing with such materials.The Blocked Vent Detector technology is a game changer for odor control and tank diagnosis. Its streamlined approach makes it easier than ever before to identify potential issues with the tanks quickly and efficiently. With this cutting-edge tool at hand, users can rest easy knowing that any problems will be swiftly addressed by experts who know what they're doing.The Raritan App offers a seamless connection that allows users to monitor tank capacity from any location on a vessel. This feature ensures constant awareness of the status of tanks and enables informed decision-making. With this technology at hand, managing resources has become effortless!Managing multiple storage facilities or tracking inventory levels can be a daunting task. But with the Raritan App, users have access to precise tank capacity readouts that make decision-making easier than ever before. This feature allows for real-time monitoring of capacities so that informed choices are always within reach. With this tool at hand, managers and analysts alike will find themselves empowered by data-driven insights they never had before. Don't let uncertainty cloud a judgment; rely instead on accurate information provided through the Raritan App!
Low Power Consumption
12 or 24V DC Options Available
NMEA2000 Adaptor - 12v Only
Monitoring tank capacity has become more streamlined than ever before with TankAssure's cutting-edge dual monitoring system. With its user-friendly control panel and seamless integration into the Raritan App users can easily keep track of a vessel's tanks without any hassle whatsoever. This combination ensures that users receive accurate readouts on current capacities while also detecting potential issues such as full or empty tanks quickly, thus staying ahead in managing vessel operations effectively! So why wait? Choose TankAssure today for all the needs related to vessel management!WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.