Marine Plumbing & Ventilation

Seaward Thermostatic Mixer ValvePlumbing "safety fitting" for the Whale "Quick Connect" system. Thermostatic mixer valve using three 1/2" BSP Male threaded ports.Constructed of nickel-plated brass including non-return valve. Each BSP running thread is fittted with O-ring.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Seaward 6 Gallon Hot Water Heater - Stainless Steel - 120V - 1500WWhale Electric Water Heaters includes model with the very latest technology. All heaters are manufactured from the highest quality materials and designed to specifically withstand harsh marine conditions.Water Heaters with a Stainless Steel cover offer high levels of corrosion resistance with a modern stainless steel finish. These heaters are a bit lighter than those wearing the galvanized outer cover and heavier than the epoxy coated versions.Features and Benefits: Horizontal Mounting only   Robust Manufacturing Hold down brackets welded to inner tank Safety controls   Integrated pressure relief valve Temperature and pressure drain tube included   Magnesium anodes available separately Recommended to prevent corrosion and ensure a longer Water Heater life   Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: No Volts: 120v Box Dimensions: 14"H x 14"W x 22"L WT: 23.6 lbs UPC: 766478948267 Brochure (pdf)

Read more less

Water Booster System - 40PSI - 4.5GPM - 24VThe Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Includes:24V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainerWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.5 GPM Max PSI: 40 Volts: 24v Box Dimensions: 9"H x 14"W x 16"L WT: 11.5 lbs UPC: 705474280025

Read more less

1100GPH Electronic Sensing Bilge Pump - 24VIn the next generation sensing bilge pumps, the 1100GPH 24V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8" Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!! Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Automatic Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 1.2 lbs UPC: 042237104816

Read more less

Cockpit Drain - No ScreenFor use with 1-1/2" I.D. hose as part of a self-bailing cockpit system. Features short stem and narrow flange for installing through cockpits. Polypropylene construction.Specifications: Stem Length: 3-3/4" Max. Hull Thickness: 1-1/2" Flange Diameter: 2-1/8" Installation Hole Size: 1-7/8" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

FW0814 WaterMaster Automatic Pressure Pump - 8L - 30PSI - 12VWaterMaster FW0814 is a pump from Whale with a compact sleek design that is easy to install and maintain.Features: 8L per minute flow rate 30PSI 12V Internal pressure switch controlled (no external switching required) Fully sealed protective motor housing Completely integrated electronics Runs dry without damage (within reason) Includes a strainer to protect the pump from debris Self priming upto 3m (10ft) Easy installation - suitable for 15mm quick connect plumbing or 1/2" hosetails Suitable for use with salt or fresh water Quit operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 2 GPM Max PSI: 30 Volts: 12v Box Dimensions: 6"H x 8"W x 10"L WT: 4.1 lbs UPC: 766478946881

Read more less

RT3000 Swim 'N Rinse Compact Deck Shower - Cold OnlyThis easy to use compact shower is the simple deck shower solution. The shower boasts high performance levels while the one touch trigger allows effortless control and uses high quality marine grade materials ensuring reliability. The shower is also simple to install with an angled holder and is virtually maintenance free.Features: Easy to use One hand trigger High performance Great flow and pressure Ease of Installation Straight or angled holder Quality and reliability Long-life marine grade materials WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

MK5 Handle AssemblyStainless steel handle assembly with lanyard for MK5 pumpsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

800GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 800GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 800 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104694 Brochure (pdf)

Read more less

800GPH Electronic Sensing Bilge Pump - 12VIn the next generation sensing bilge pumps, the 800GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!!Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 800 GPH Operation: Automatic Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104779

Read more less

Vented Loop Solenoid Valve for 37010 Series ToiletWhen installing a vented loop in the inlet hose, it is recommended that a Vented Loop Solenoid Valve (37068-2000) is connected to the vent air inlet to ensure maximum electric toilet performance and prime-ability. Connect the brass port of the valve (remove plastic filter, if installed) with the air inlet of the vented loop. Wire the solenoid valve in parallel with the toilet motor by connecting one side of the solenoid to the toilet flush switch and the other side to battery ground.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Neoprene Impeller Kit with Cover, Gasket or O-Ring - 6-Blade - 5/16 Shaft DiameterJabsco's Neoprene Impeller Kit is used specifically in Jabsco's Water Puppy, Part #6617.Included: Cover Gasket O-Ring WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less