Marine Plumbing & Ventilation

ElectroScan Control Assembly - 12VThe ElectroScan control assembly for 12-volt systems operates the ElectroScan that can be used with both manual and electric toilets to treat waste. The ElectroScan system creates a natural disinfectant from salt water and automatically treats the waste at levels that are environmentally safe for discharge. The ElectroScan control assembly for 12-volt systems can be added or replaced as needed.The newest control mounts away from the tank to allow installation in a dry area. The main computer board allows the system to sense the functioning of the treatment cycle by reading key data and returning information to the user on a display, by utilizing this technology.The Electroscan can use less power than previous versions of the system. The original system was called the Lectra/San.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Hose Barb Thru-Hull Fitting - 1-1/8" Features: NPS Thread With Hose Connection #316 Stainless Steel UL Listed 647B Specifications: Hose Size: 1-1/8" Material: Stainless Steel Box Dimensions: 3"H x 3"W x 5"L WT: 0.7 lbs UPC: 742985138995

Read more less

11811 - 6 Gallon Water Heater - 120VKuuma's Premium 6 Gallon Water Heater is perfect for a new installation or as a replacement to an existing water heater.   Constructed of corrosion-resistant, marine-quality aluminum and heats water with the use of an electrical power or integrated heat exchanger.Features: Ignition protected controls Mounting tabs Manual reset Technical Specifications: Capacity - 6 Gallon Electrical Input - 120V Orientation - Horizontal Mounting Brackets - Front and Rear Heating Source - Front heat exchange Maximum Water Temperature - 210°F T & P Valve Type - 100psi and 210° F Wiring Configuration - L1 and N Dimensions (W x H x D) - 13-3/4" x 13-5/8" x 19-3/4" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: Yes Volts: 120 Box Dimensions: 16"H x 17"W x 23"L WT: 21.7 lbs UPC: 014717118118 Owner's Manual (pdf)Brochure (pdf)

Read more less

Shower Sump Pump System - 750 GPHPart #: 4143-4Attwood's shower sump systems deliver the performance you've been asking for. Large Box size that offers fast water flow into and out of sump. The lid snaps in to allow quick installation (and removal for cleaning) and includes a gasket to seal the sump box against overflow. The sump box even includes an air to prevent air locks. Meets or exceeds all applicable of the ABYC and USCG.Features: 36" Wire 12V Large Box Size WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 750 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 5"H x 9"W x 14"L WT: 3.4 lbs UPC: 022697414342 Quick Guide (pdf)

Read more less

Impeller Kit - 10 Blade - Neoprene - 2" Diameter x 7/8"W Pin Drive InsertMaterial: NeopreneInsert Material:BrassDrive Type: Slotted Shaft Pin Drive or Through Hole Pin DriveNumber of Blades: 10Dimensions:Diameter:2"Shaft Width:1/2"Shaft Diameter:7/8"Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

In-Line 3" Bilge Blower - 24VFeatures: Connections: - for 75mm (3") ducting Dimensions: - 130mm long, 95mm high, 125mm wide Fuse Size: - 2.5(amp) Output: - 3.8 cu. m/minute Efficient high volume airflow Quiet running Slip-on inlet and outlet ducting connections Made in corrosion-resistant materials Mounts in any position on any flat surface Low current draw Packaged Dimensions: L:15.00 x H:12.00 x W:13.00cm Actual Weight: 0.54 Kg  (Approx. 0.79 Kg packed) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

KlickTite 2 x 90 - 3/4" HoseAllows draining of the system quickly and effortlessly. 

Read more less

Impeller Kit - F75 with ThreadFeatures: New Impeller only Replaces: Johnson 09-821BT-1 , 09-821B , 09-821BT Sierra 18-45714 Fits F75 Series Pumps , F75B-9 One end is threaded for use with a puller

Read more less

Stainless Steel Quick-Release Hose Deck Mount Fitting & Hose AdapterStainless Steel Deck Mount Fitting, 1/2" NPT Female Inlet, 3/4" GHT Male Hose Adapter.The Quick Release Connector provides the perfect installation solution for your HoseCoil washdown or garden style hose. The Quick Release installs easily on your boat and allows you to stow your hose out of the way. Never trip on a hose again! This clever design will allow you to flush mount the Quick Release into your cockpit or bulkhead.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 8"W x 8"L WT: 1.4 lbs UPC: 671880550239 Brochure (pdf)

Read more less

Upper Assembly Replacement for 4558 Series High Flow Systems & 4648 Series Pro BaitMaster II 4.0 Heavy Duty Livewell/Washdown PumpsThis Shurflo upper assembly replacement is for the 4558 Series high flow systems and the 4648 Series Pro BaitMaster II 4.0 heavy-duty livewell/washdown pumps listed below: Shurflo High Flow System 12V 4558-153-E75 (4258-153-A09 [4258-153-E09*]) Shurflo High Flow System 24V 4558-163-E75 (4258-163-A09 [4258-163-E09**] Shurflo Pro BaitMaster II 4.0 (4648-153-A07 [4648-153-E07]) Shurflo Pro BaitMaster II 4.0 24 VDC (4648-163-A07 [4648-163-E07]) Quick Guide (pdf)

Read more less

Pumphead Kit for 4148 Series Aqua King™ II Premium 4.0 PumpsThis Shurflo pump head replacement is for 4148 Series Aqua King™ II Premium 4.0 pumps listed below: Aqua King™ II Premium 4.0 (4148-153-A75 [4148-153-E75]) Aqua King™ II Premium 4.0 24 VDC (4148-163-A75 [4148-163-E75]) Quick Guide (pdf)

Read more less

Pumphead Kit for 4258 Series High Flow System & 4648 Series Pro BaitMaster II 4.0 Heavy Duty Livewell/Washdown PumpsThis Shurflo pumphead kit is the for the 4258 Series high flow system and the 4648 Series Pro BaitMaster II 4.0 heavy-duty livewell/washdown pumps listed below: Shurflo High Flow System 24V 4558-163-E75 (4258-163-A09 [4258-163-E09**]) Shurflo Pro BaitMaster II 4.0 (4648-153-A07 [4648-153-E07]) Shurflo Pro BaitMaster II 4.0 24 VDC (4648-163-A07 [4648-163-E07]) Quick Guide (pdf)

Read more less