Marine Plumbing & Ventilation

1700 Series Water Heater120v12 GallonWith Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 12 Heat Exchanger: Yes Volts: 120v Box Dimensions: 21"H x 22"W x 23"L WT: 58 lbs UPC: 085462001550 Owner's Manual (pdf)Brochure (pdf)

Read more less

ARG-2003 Sight Glass Fits ARG-2000Sight glass fits the ARG-2000.

Read more less

1-1/2" Bronze High Speed Thru-Hull Fitting w/Nut Features: Designed for increased flow compared to standard Thru Hulls and with less drag NPSM / NPT combination thread C83600 Bronze Specifications: Hose Size: 1-1/2" Material: Bronze Box Dimensions: 3"H x 3"W x 4"L WT: 1.3 lbs UPC: 742985143258

Read more less

3/4" Bronze Extra Long Thru-Hull Fitting w/Nut Features: Extra long NPSM / NPT combination thread C83600 Bronze Specifications: Hose Size: 3/4" Material: Bronze Box Dimensions: 3"H x 3"W x 7"L WT: 0.8 lbs UPC: 742985141742

Read more less

2" NPT x 2-1/4" Bronze Full Flow Pipe to Hose Straight FittingFeatures: Full Flow Male NPT x Hose connection C83600 Bronze Sizes from 1/2" to 3" UL Listed 647B Note- C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems Specifications: Construction: Bronze Box Dimensions: 3"H x 3"W x 3"L WT: 1 lbs UPC: 742985003651

Read more less

Quiet Flush E2 Fresh Water Toilet Regular Bowl - 24V - Soft Close LidFrom crowded charter boats to racing yachts and everything in between, the award-winning Jabsco Quiet Flush E2 marine toilet has been designed to solve some of the biggest marine waste challenges facing boat owners and manufacturers. With its simplified installation, ease of serviceability, and sleek touch sensor control, the Quiet Flush E2 brings a whole new level of convenience and comfort to the water.Easy 2 InstallThe Quiet Flush E2 gives even the occasional boater the confidence to install this toilet. For maximum flexibility in tight spaces, the base can be rotated, allowing you to install the pump with the discharge to the left, right, or rear.Easy 2 ServiceDesigned for recreational craft but built to withstand the abuse of commercial use, the quick-release system provides easy access to the macerator pump and discharge hose with no tools needed.Easy 2 OperateMarine toilets bring the comfort of home with you, but there are additional considerations on a boat, which is why the Quiet Flush E2 puts you in complete control. With its sleek touch sensor panel, you can choose three settings — including a water-saving, eco-flush cycle.Installation: Base can be rotated to the left, right, or rear of the bowl to suit multiple installation options Discharge pump can be rotated 180° to suit the base orientation and ensure pipework is routed to the rear of the toilet Straight or 90° discharge port for easy install Quick Release for Easy Servicing: Quick release system allows for fast and easy removal of discharge pump and hose when servicing is necessary C-Clip design releases the pump assembly from the toilet base without the need for tools, resulting in fast service time Multi-Function Touch Panel: Stylish low-profile design Touch-sensitive operation Eco flush, full flush, or empty functions Only 1-litre (1-quart) per flush using eco mode Designed for wet room installations No spill ‘empty’ feature to leave bowl dry when boat is in motion Specifications: Bowl Size: Regular Seat & Lid: Composite Slow-Close Lid: Yes Water: On-board fresh water Device: Solenoid valve Flush Control Switch: Touch Panel Voltage DC: 24 Recommended Fuse Size: 15 amp Dimensions: Height: 14.4 in. (365 mm) Width: 14.8 in. (375 mm) Depth: 18.9 in. (480 mm) Weight: 38.6 lbs (17.5 kg)  Specifications: Rinse Water: Fresh Type: Toilet Volts: 24v Box Dimensions: 21"H x 24"W x 24"L WT: 50 lbs UPC: 671880640985 Quick Guide (pdf)

Read more less

Pump Self Priming Hand Operated Manual Galley PumpWhale's manual galley pumps are truly design classics. Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.Narrow mounting base allows installation for use between two sinks.Features Ideal where space is limited Angled spout and adjustable height provide various options for installation Extended spout makes for easy filling of containers Capacity 8 ltrs (2.2 US gals) per minute Narrow mounting base allows installation for use between two sinks Delivers a smooth flow on each stroke Useful as a back-up pump or for a simple freshwater supply pump Suitable for fresh water and saltwater WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 2.2 GPM Box Dimensions: 2"H x 8"W x 11"L WT: 0.5 lbs UPC: 766478065001

Read more less

Bronze AC Motor Pump UnitFlow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 7.8ftFeatures: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance - seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow. APPLICATIONSMARINE:Bait tank circulation, transfer oil, wash down, and utility dock pumps.INDUSTRIAL:Circulate coolant on machine tools, industrial filling systems, utility shop pump, transfer gum arabic, transfer distilled water, recharge water softeners, ice water recirculation, hydrostatic pressure testing, vacuum pump, and aspirating pump.FOOD, BEVERAGE, & DAIRY:Circulate cooling water, defrost refrigeration coils, fill drums, wash down equipment and floors, and utility pump.HOME:Fill and empty tubs and pools, empty basements, cesspools, water systems, water lawns and gardens, remove water from low areas, and recharge water softeners.PLUMBING:Empty clogged sumps, drains, sinks and tubs, and pump out water closets.FARM:Fill tractor tires, fill water tanks, pump out silo pits, liquid manures, transfer oil, and flush and clean animal pens.CONTRACTORS:Remove water from excavations, supply water to mortar boxes and cement mixing, and washdown equipment.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9.6 GPM Max PSI: 17.3 Volts: 115v Box Dimensions: 10"H x 11"W x 12"L WT: 22.45 lbs UPC: 671880007573 Owner's Manual (pdf)

Read more less

Quiet Flush Electric Toilet - Rear Macerator - Raw Water Pump - Regular SizeFeatures: Inlet 3/4" Hose Barb Soft close seat safety and quiet Built-in upgraded macerator pump makes flushing quieter Outlet 1" Hose Barb Easy-to-clean ceramic bowl The bowl can be rotated 90 degrees for mounting in confined spaces Very quiet flush cycle - like a household toilet Single button flush actuator - with dual function water level control switch Supplied with SEAFLO seawater rinse pump to provide seawater or lake water to rinse the toilet bowl White vitreous china bowl available in compact or comfortable household size Built-in upgraded macerator pump makes flushing quieter All corrosion-resistant material for marine use Specifications: Voltage: 12V Max Draw: 16A Size: Regular Port: Inlet 3/4" Hose Barb, Outlet 1" Hose Barb Materials: Ceramic bowl, Soft close seat Features: Built-in macerator Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" Rinse Water: RAW Type: Toilet Volts: 12 Box Dimensions: 16"H x 17"W x 22"L WT: 40 lbs UPC: 817683023451

Read more less

12 GPM Macerator Pump - 24VThe Macerator Pump is engineered to tackle the toughest marine and RV waste management challenges. Featuring a powerful quad-blade chopping system and a triple-sealed motor, this pump is built to easily handle the emptying of holding tanks, fish boxes, and livewells. Its robust design includes anti-clog technology, ensuring consistent operation even with challenging debris.This pump delivers an impressive 12 GPM flow rate, allowing you to empty a 30-gallon tank in less than three minutes. With a self-priming suction up to 4 feet, the Macerator Pump guarantees reliable performance every time. Designed for durability, the pump's sealed motor is o-ring protected, thermally shielded, and powder-coated to resist both internal and external corrosion. The quick-connect wiring system simplifies installation and replacement, making this pump a dependable choice for marine and RV applications.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows the user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Quad-Blade Chopping Design: The advanced quad-blade system efficiently grinds waste, minimizing the risk of clogs and ensuring consistent operation even with demanding tasks. High Flow Rate: Delivers a powerful 12 GPM (45 LPM), making it ideal for quickly emptying holding tanks, livewells, and fish boxes in less than three minutes. Triple-Sealed Motor for Durability: Features o-ring sealed end bells, sealed bearings, and a powder-coated shell, protecting the motor from internal and external corrosion in harsh marine environments. Self-Priming to 4 Feet: The pump’s self-priming capability ensures reliable suction, making it suitable for varied installation heights and conditions. Anti-Clog Technology: Includes a rear anti-clog system and an easy-access knob for clearing blockages, ensuring smooth operation during waste disposal. Ignition Protected: Designed to meet ISO 8846 Marine standards, making it safe for use in engine compartments and other confined spaces. Quick-Connect Wiring: Simplifies installation and replacement, saving time and effort for users during maintenance or upgrades. Run-Dry Protection: Built-in thermal sensors allow the pump to run dry for short periods, preventing damage during priming or unexpected interruptions. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Voltage: 24V Open Flow Rate: 12 GPM (45 LPM) Ports: 1-1/2” MNPT Inlet, 1” Hose Barb Outlet Impeller Material: Rubber & Copper Max Draw: 12.0A (12V) / 6.0A (24V) Dimensions (L x W x H): 13.78" x 5.12" x 4.33" (35.0 x 13.0 x 11.0 cm) Included Components: Commodore DC Macerator Pump (24V) 1-1/2” MNPT Inlet Adapter 1” Hose Barb Outlet Adapter Quick-Connect Wiring System Specifications: Color: Black/White Gallons Per Minute: 12 Inlet Size: 1-1/2" Operation Method: Electric Outlet Size: 1" Type: Macerator Pumps Volts: 24 Box Dimensions: 5"H x 6"W x 13"L WT: 5.8 lbs UPC: 817683023277

Read more less

Triple Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Triple Pump 12VDC:Three motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications:Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases.Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.0 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 0.75 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L  Weight 2.2 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher

Read more less

Deluxe Flush Electric Toilet - Raw Water PumpFeatures: Inlet 3/4" Hose Barb Soft close seat safety and quiet High-capacity bowl discharge pump makes toilet flushing quieter Outlet 1-1/2" Hose Barb Easy-to-clean ceramic bowl All plumbing and wiring are easily concealed Specifications: Voltage: 12V Max Draw: 20A Port: Inlet 3/4" Hose Barb, Outlet 1-1/2" Hose Barb Materials: Ceramic bowl, Soft close seat Features: Built-in macerator Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" Rinse Water: RAW Type: Toilet Volts: 12 Box Dimensions: 18"H x 20"W x 23"L WT: 70 lbs UPC: 817683023475

Read more less