Marine Plumbing & Ventilation

1100GPH Electronic Sensing Bilge Pump - 12VIn the next generation sensing bilge pumps, the 1100GPH 12V S series pump works on the principle of impeller resistance. The pump will turn on every 2-1/2 minutes for about one second to sense for water. If water is present, the pump will sense resistance and continue to run until all water is removed. After that, it will resume checking for water every 2-1/2 minutes. Water is kept in check between 1/8" and 3/8"!!! Great idea when power conservation is needed and as an added benefit, no float switch is needed!All that plus the added benefits of our standard bilge pump: Check valve included with hidden air vent to prevent airlocking True electromagnetic suppression (EMC) A built-in thermal cell that protects the pump and the vessel when things get too hot These are the smallest automatic pumps available on the market!!!Features: Completely automatic with manual override - No Float Switch Needed! Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 100 GPH Operation: Automatic Volts: 12v Box Dimensions: 4"H x 7"W x 7"L WT: 1 lbs UPC: 042237104809

Read more less

Base Valve Gasket for 29090 & 29120 Series ToiletsJabsco Base Valve GasketCompatible Models: 29090 Series Toilets 29120 Series Toilets

Read more less

1500 G.P.H. Automatic Bilge PumpHigh pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Computerized operation - no float switch required 3 wire version allows manual override or indicator light capability Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and Corrosion protection Used by leading boatbuilders worldwide marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1500 GPH Operation: Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 4.45 lbs UPC: 042237084965 Owner's Manual (pdf)

Read more less

Water Puppy (US)Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps Simple design means fewer wearing parts ISO 8846 MARINE (Ignition protection) ISO 8849 MARINE (Bilge pump standard) Flow rate: 23.8 Litres/min (6.3 USgallons/min) Self-priming from dry up to 1.2m (4ft) Body: Bronze Impeller: Neoprene Seal: Lip type Voltage: 12 Vdc Amp Draw: 8 amp Fuse Size: 15 amp Motor: Permanent magnet type, fully enclosed, stainless steel shaft. Adapter for 3/4" External Garden Hose Thread included Weight: 4-1/2 lb WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 378 GPH Gallons Per Minute: 6.3 GPM Outlet Size: 1" Volts: 12v Type: Electric Box Dimensions: 5"H x 6"W x 10"L WT: 5.85 lbs UPC: 671880532112 Owner's Manual (pdf)

Read more less

17820 Oil Changer SystemThe Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 8"H x 12"W x 12"L WT: 10.95 lbs UPC: 671880529624 Owner's Manual (pdf)

Read more less

3/4" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - BlackTrident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze.Features:149 series of hoses is extra flexible Application:Bilge and live well hoseSpecifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 3/4" / (mm) 19.1 Outer Diameter: (inch) .986" / (mm) 25 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 11 / (Kg/m) 4.99 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure Specifications: Length (Feet): 50' ID Diameter (inches): 3/4" Box Dimensions: 5"H x 18"W x 18"L WT: 9.4 lbs UPC: 704917017822 Quick Guide (pdf)

Read more less

0541 Vented Fill f/1-1/2" Hose - Straight Neck - Gas Straight Neck Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve Deck Plate Key and O-Ring Included Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-3/8" Mounting Hole Dia.: 2-1/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

TastePURE Drinking Water Freshener - 16oz BottleCamco TastePURE Drinking Water Freshener helps to eliminate algae and slime from your drinking water tank. Just 1 ounce for every 20 gallons of water helps remove bad smells and tastes. Features: Prevents algae and slime buildup from RV drinking water tanks Just 1 oz. helps remove bad smells and taste from 20 gallons of water Keeps stored fresh water tasting and odor free 16 oz. bottle Easy to use

Read more less

58541-1000 Pulley & Belt Kit Kit contains small and Large pulley, belt and clip.Compatible With:58500 Series Lite Flush Toilets*Sold as an Individual  Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 6"L WT: 0.5 lbs UPC: 671880616874

Read more less

Impeller KitMaterial:NeopreneDrive Type:Spline DriveNumber of Blades:10Dimensions:Diameter:2-1/4"Shaft Width:5/8"Shaft Diameter:2Insert Material:BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Backing Block for 1-1/4" & 1-1/2" SeacocksFeatures: Each size fits multiple seacock sizes Press threaded brass inserts into the hull side of the backing block into the holes that match the seacock flange Rigid 1/2" thickness provides secure installation but is flexible enough to conform to minor hull curvature Will not swell or absorb moisture Made from an environmentally friendly PVC foam specially formulated for marine applications Specifications: Construction: Bronze Box Dimensions: 1"H x 7"W x 9"L WT: 0.25 lbs UPC: 742985170148

Read more less

Par-Max 2 Water Pressure Pump - 24V - 2 GPM - 35 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 35 Gallons Per Minute: 2 GPM Box Dimensions: 5"H x 6"W x 15"L WT: 4.5 lbs UPC: 671880841771 Brochure (pdf)

Read more less