Marine Plumbing & Ventilation

Perko 3/4" Thru-Hull Connection f/ use with Hose BronzeFlange is machined to fit and grooved to retain bedding compound neck isthreaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inchesShort Length- For thin hull sections up to 5/8 inches maximumTechnical Information Regular Length - Plain Bronze: Hose Size Inches: 3/4 Mounting Hole Diameter Inches: 1 Maximum Hull Thickness Inches: 1-5/8 O.D. Flange Inches: 1-7/8 Model Number: 0350005DPP Ship Weight: 2.9/5.5 lbs. Made in the USA Specifications: Hose Size: 3/4" Material: Bronze Box Dimensions: 1"H x 1"W x 4"L WT: 0.3 lbs UPC: 085226036088

Read more less

Automatic Switch AS888For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32 V systems. Use AS888 for a better and safer life afloat!

Read more less

AquaT Marine Electric ToiletAvailable in a wide variety of different versions marketed under three basic models - standard and premium electric-powered or manual - the Johnson Pump AquaT marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.Using the Johnson Pump AquaT marine toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design.Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.The AquaT toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service.Power models are shipped with well-proven Aqua Jet diaphragm pumps.It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.CE-approvedFeatures Whisper quiet operation Self-priming pump One push button on control panel Clean lines - pleasing to the eye Hygienic, easy-to-clean vitreous china bowl and exterior surfaces Robust wooden seat with durable baked enamel finish Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity Versatile plumbing connection options Automatic back-flow prevention Available in comfort or compact bowl sizes Designed for virtually any onboard mounting position May be installed above or below the waterline Suitable for OEM or replacement installation Corrosion resistant materials throughout Long service life Equipped with 12V Aqua Jet pumps Quick-connect hose or threaded connectors Complies with ISO 8846, ignition protection, and EN 55014 EMC Specifications: Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1-1/2" or 1" Volts: 12v Type: Toilet Box Dimensions: 16"H x 17"W x 19"L WT: 31.9 lbs UPC: 7330717011499 Owner's Manual (pdf)

Read more less

1700 Series Water Heater120v20 GallonW/O Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 20 Heat Exchanger: No Volts: 120v Box Dimensions: 22"H x 22"W x 28"L WT: 65 lbs UPC: 085462001598 Owner's Manual (pdf)Brochure (pdf)

Read more less

Continuous Duty Solenoid (CDS)Raritan's Continuous Duty Solenoid is a toilet replacement part.Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 7"L WT: 0.9 lbs UPC: 085462005756

Read more less

Proline Bilge Pump1000 GPH w/DuraPortsCapacity 3' (0.9M) head (13.6V):60 L/M - 952 GPH Capacity Straight (13.6V): 73 L/M - 1150 GPHAmperage:3AFuze Size:5AConnection:3/4"Dimensions: 5"L x 3"W x 4"H Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 7"L WT: 0.9 lbs UPC: 729321221023

Read more less

Shower Drain Box with 800 GPH Pump - 12VThis compact, full-capacity shower drain system provides 800 GPH (3028 LPH) of output. Activated by a float switch, it turns on as the tank fills and shuts off when it’s empty. It has three inlet ports that offer varying combinations for the inlet hose, as well as a quick-release tank lid and an easy-clean internal strainer. Specifications: Type: Shower Drains Gallons Per Hour: 800 GPH Volts: 12v Box Dimensions: 6"H x 11"W x 14"L WT: 4.1 lbs UPC: 042237106551

Read more less

Heavy Duty Flexmount BlowerAC 250 CFM Flexmount Continuous Duty 4" BlowerFlexmount Blowers are built to the same high specification as the Heavy Duty Flangemount Blowers for use as air intake or extraction systems in engine rooms, fuel compartments, galleys or heads. Extended Life Induction Motor Tough Reinforced Thermoset Plastic Housing Continuous duty motor with thermal overload protection Flexmount universal bracket permits outlet to face any direction Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout 5,000 hr motor life for teh heaviest of applications. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 4" Open Flow (CFM): 250 CFM Volts: 115v Box Dimensions: 11"H x 11"W x 14"L WT: 9.4 lbs UPC: 671880525954 Owner's Manual (pdf)

Read more less

Coiled Wash Down Hose - 25' - 1/2" DiameterFeatures: Parable with all Aqua Jet Washdown Pumps 25' hose length 1/2" hose diameter Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 5"W x 18"L WT: 1.9 lbs UPC: 729321106153

Read more less

Sea Kayak Pump w/Float-a-Pump SleeveDesigned specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect a compass. A hose can be added for extended discharge. The installed Float-a-Pump provides positive flotation for pumps dropped overboard.Features: Diameter: 1-3/4" Length: 18" Strokes per Gallon: 8 strokes Gallon per minute: 8 gallons Mounting clips sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 480 GPH Gallons Per Minute: 8 GPM Type: Manual Box Dimensions: 3"H x 4"W x 20"L WT: 0.7 lbs UPC: 021083008776

Read more less

Macerator Pump TA3P10-19, 12vThe Johnson Pump brand TA3P10-19 Macerator pump takes care of the toilet/livewell waste, shredding it before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet or the bowl discharge outlet. Note! Use unbleached lavatory paper only.Features: Ignition protected motor, conforming with ISO 8846 Marine Mounting bracket for easy replacement Extremely energy efficient Rotary cutter casing of PET (thermoplastic polyester) Directly connected to sewage line or holding tank Capacity at 0.2 bar (6.7 ft):37 l/min - 10 GPM Inlet Connection:11/2" (dia 38 mm) hose or 11/2"NPT Amperage: 15 A Fuse Size: 20 A Outlet Connection: 1" (25.4 mm) hose Motor: 12V DC (with built-in thermal protection) Pump Body: Phenol Plastic (PF) Impeller: Nitrile Cutter Casing: Thermoplastic Polyester (PET) Shaft: Stainless Steel Seal: Lip Seal Length: 230 mm - 9.06" Width: 108 mm - 4.25" Height: 82 mm - 3.23" Weight: 1.9 kg - 4.2 lbs *CE-Approved Specifications: Volts: 12v Outlet Size: 1" Inlet Size: 1-1/2" Gallons Per Minute: 10 GPM Type: Waste Pumps Box Dimensions: 4"H x 6"W x 11"L WT: 4.75 lbs UPC: 787766709018

Read more less

Non-Metallic Strainer Cap Fits ARG-500 & ARG-750Features: Non-Metallic Strainer Cap  Fits ARG-500 & ARG-750

Read more less