In-Line StrainerThe Raritan In-Line Strainer protects marine equipment and reduces raw water toilet odors caused by seawater particles. A water strainer is a crucial part of the water intake system on your boat. In-line strainers come in a variety of sizes and help filter out plant life or other solids that get sucked into your hose, keeping it from plugging up your system downstream.Features:
A major cause of pump failure is seaweed and other debris sucked into the pump inlet
In-Line Strainers will effectively remove these items, prolonging the life of your pump and lengthening rebuilding schedules
Inexpensive protection for expensive parts
Easy to install and maintain
Clear, high-strength plastic bowl
Convenient 1/2" female NPT connections
20 mesh plastic removable filter for easy cleaning
Can be mounted away from pumps for convenient access
Compact size
Each unit is assembled by hand, individually tested, and backed by Raritan’s one-year Limited Warranty and legendary technical support team
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Snap-Handle Brass Drain Plug - 1" DiameterA clockwise turn of the handle tightens the plug in its tube, and the handle flips down to lock.Features:
Handle: Brass
For 1" diameter drains
*Sold as an Individual Specifications:
Construction: Brass
Box Dimensions: 2"H x 2"W x 6"L WT: 0.1 lbs
UPC: 022697752475
Quick Guide (pdf)
Bronze Pipe Nipple - 1-1/4" NPT Features:
Cast-in wrench flat simplifies installation and removal
NPT x NPT Connection
C83600 Bronze
Full flow
Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems.
Specifications:
Construction: Bronze
Box Dimensions: 2"H x 2"W x 3"L WT: 0.68 lbs
UPC: 742985143661
1500 Bilge Pump - 12 VDC, 1500 GPHHeavy duty and built to last. SHURFLOs 1500 GPH nylon bilge pump offers a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our patented swivel base and 6' tinned wire assembly.Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Volts: 12v
Operation: Non-Automatic
Gallons Per Hour: 1500 GPH
Type: Electric
Box Dimensions: 6"H x 7"W x 9"L WT: 5.5 lbs
UPC: 752324010110
SANI/FLEX 1.5" Odor Shield Hose - Sold by the FootHighest quality marine sanitation hose. Butyl rubber construction has the lowest odor permeation level of any rubber or PVC material hoses. Extremely flexible for easy installation with a low bend radius of up to two times its diameter.Features:
Impermeability - Special butyl white rubber compound tube odor-free
Flexibility - Allows tight bending radius making any installation easy
Reinforcement - Double steel wire Helix with high-strength synthetic textile yarn
Cover - White – abrasion, ozone, seawater resistant rubber
Surface - Smooth fabric finished – antibacterial vanilla scented
Interior - Smooth walled – no ridges – easily fits over fittings
Warranty - 10-year guarantee against odor permeation
Specifications:
ID: 1-1/2"
OD: 1-7/8"
Weight: 0.6lbs/ft.
MAX Pressure: 105 PSI
Burst Pressure: 315 PSI
MAX Vacuum: 13.5 PSI
Bend Radius: 3.15"
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)
3/4" NPT Bronze In-Line Ball ValveFeatures:
Female NPT Threads
1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for draining
Selectable handle rotation
Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves
400 WOG rated
Full flow
C83600 bronze construction
Stainless steel handle and hardware
Chrome plated solid brass ball (not a hollow ball)
PTFE seats and seals
Bonding attachment
UL listed for fuel or water
Fits IBVF for Seacock Application
Specifications:
Construction: Bronze
Box Dimensions: 2"H x 4"W x 6"L WT: 0.95 lbs
UPC: 742985141841
Desription - C.P. Brass 1/2" FIPT x 3/4" GHT outlet
Base diameter - 2-3/4"
Depth - 1"
Fastener - #6 (3)WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Water Pressure Booster System - 12VJabsco Marine Water Pressure Booster Systems are fully assembled water pressure systems for your onboard freshwater setup.Features:
Panel System
Run dry ability
Smooth even flow
Thermal overload protection
ISO 8846 MARINE (Ignition Protection)
Jabsco panel systems are fully assembled with pump, pressure switch, accumulator tank, and strainer and are mounted on one board for rapid and easy installation. Panel systems are ideal for up to four outlets.
Complete Purasan EX Treatment System - 12VRaritan Purasan Waste Treatment System is suitable for all marine sanitation needs. The Purasan EX was originally developed for the freshwater lakes in Kentucky as an alternative to the Lectra/San.This Type I Marine Sanitation Device (MSD) has become increasingly popular with many users in both salt and freshwater. Raritan believes that treating a single flush at the source and discharging into tidal water is far more effective than risking having a holding tank dumped overboard when a pump-out cannot be found or is not functioning. Each user has unique needs when boating and for many a holding tank may be the best solution while some prefer to treat and discharge. There are a few things to consider when choosing a Type I MSD.While Treatment is required inside the three-mile limit there are areas that prohibit discharge from Marine Sanitation Device. The areas that do not allow discharge of any type are called No Discharge Zones and these zones are specific, at this time, to treated black water only. So, any vessel operator or owner should consider the amount of time spent cruising, the areas in which they will be cruising and the availability of pumpouts. A holding tank should never be discharged overboard.The Purasan EX is a flow through system which means that the toilet is connected to the tank and the tank is connected to the thru-hull. With each flush of the toilet the waste enters the tank where a small amount of disinfectant is introduced to neutralize the waste. At the same time an equal amount of treated waste is forced out of the tank and overboard.Purasan ImprovementsThe tablets used are very similar to the mixture used in commercial waste water treatment plants. When the toilet flushes a small amount of water is run over the tablets to create a disinfectant that drains into the tank and a high-speed macerator inside the tank breaks down waste and ensures that the disinfectant comes in contact with the waste. This system does require the user to buy tablets to keep the system functioning properly. While the original Purasan remained largely unchanged for a long time the newest version the Purasan EX has added a control that will notify the user when tablets need to be added.Another improvement in the Purasan EX over the original design is the addition of an air pump that forces the water down into the treatment tank. This makes mounting of the system easier and prevents the tablets from disintegrating too fast. While it was originally designed for just freshwater use and for use with specific toilets it can now be used with almost any marine toilet. The only freshwater required is the water that passes over the tablets. However, toilets can flush with either salt or freshwater.