Marine Plumbing & Ventilation

Perko 3/4" Intake Strainer BronzeCast bronzeMachined SlotsTechnical Information: Maximum Pipe Size Inches: 3/4 Maximum Hull Thickness Inches: 2-3/16 Dimensions Strainer Inches: 3 x 4 Model Number: 0065DP5PLB Ship Weight: 5.2/10.6 Screw Size: #8 Spare Flanged Nut: 0075

Read more less

Heavy-Duty Basin Mixer - Chrome PlatedThis heavy-duty basin mixer is chrome-plated brass and has quarter turn ceramic valves.Specifications: Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings Material: Chrome-plated brass Mounting Hole: 1-1/4 in. Shipping Weight: 5 lbs. *The "P" within the part number indicates retail packaging

Read more less

Stainless Steel Sink Basin - 9" x 4" - Brushed FinishThis is the smallest Scandvik basin sink. Same great quality as the mirror finished version. Specifications:Material: 18/10 Stainless Steel (brushed finish) Flange Profile: B Flange Width: 5/8 in. Depth: 4 in. Drain Opening: 2-1/16 in. Shipping Weight: 4 lbs.

Read more less

Rule-Mate® 1100 Fully Automated Bilge Pump - 12VFeatures: State-of-the-art water sensing technology Pump turns on when water level rises and shuts off when water is removed No float switch required 1100 GPH/4164 LPH Anti-fouling impeller Submersible Ignition protected Includes back flow preventer 3-year warranty Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Automatic Volts: 12v Box Dimensions: 4"H x 7"W x 9"L WT: 1.3 lbs UPC: 042237106216

Read more less

Impeller KitMaterial:NitrileDrive Type:Single Flat DriveNumber of Blades:6Dimensions: Diameter:2" Shaft Width:5/16" Shaft Diameter:7/8" Insert Material:PlasticJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is =possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

304 Stainless Steel Strainer Basket Only Size 10 for 2-1/2" StrainerFeatures: Stainless steel Replacement basket for intake strainer Diameter: 2-1/2"

Read more less

Rule 1500High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protetion Compact, efficient long life motor Ignition protected No burn-out when run dry Rust and corrosion protection Used by leading boatbuilders worldwide Marine grade blocked wiring WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 1500 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Volts: 12v Type: Electric Box Dimensions: 5"H x 6"W x 7"L WT: 3.1 lbs UPC: 042237083302 Owner's Manual (pdf)

Read more less

Non-Metallic Strainer Cap Fits ARG-1500 & LargerFeatures: Non-Metallic Strainer Cap  Fits ARG-1500 & Larger

Read more less

2" Bronze Combo Scoop Thru-Hull w/Nut Features: Designed for increased flow compared to standard Thru Hulls NPSM / NPT combination thread C83600 Bronze Specifications:Thread NPS: 2" Specifications: Hose Size: 2" Material: Bronze Box Dimensions: 5"H x 6"W x 7"L WT: 3.3 lbs UPC: 742985101739

Read more less

Flexmount BlowerHigh volume air intake or extraction blowers for engine room, fuel compartment, galley or headsFeatures: Flexmounting for 360° adjustable outlet Slip-on inlet and outlet ducting connection Low current draw Dimensionally stable quiet running Delrin rotors Corrosion resistant materials throughout Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) ISO 9097 MARINE (Electric Fans) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Ducting: 3" Open Flow (CFM): 105 CFM Volts: 12v Box Dimensions: 7"H x 8"W x 9"L WT: 2.9 lbs UPC: 671880030526 Owner's Manual (pdf)

Read more less

SuperSwitch™ Float Switchw/ Fuse HolderNow backed by a 5 year warranty, the non-mercury SuperSwitch is designed for the toughest applications. Design includes marine grade 14 gauge blocked wire, larger float for increased buoyancy, removable base for easy servicing and a snap switch design capable of handling pumps drawing up to 20 Amps.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12, 24, 36v Type: Switches Box Dimensions: 3"H x 10"W x 11"L WT: 0.4 lbs UPC: 042237095527 Owner's Manual (pdf)

Read more less

Aqua Void Auto Bilge Pump Replacement Cartridge Motor - 800 GPHThis replacement cartridge can be used to upgrade the output of a pump or to simply replace an Aqua Series bilge pump.Features: 800GPH auto replacement motor for Aqua Void Auto Bilge pumps only Simple, two-handed twist and pull operation to remove and replace the motor cartridge No tools required Specifications:Pump Size: 800 GPH Specifications: Type: Pumps/Drives Box Dimensions: 3"H x 3"W x 6"L WT: 0.8 lbs UPC: 7330717015312

Read more less