Marine Plumbing & Ventilation

Solenoid/Anti-Syphon Valve - 12VSpecifications: Solenoid valve for use with Quiet Flush fresh water toilets inline normally closed solenoid valve Supplied with 1/2" (15mm) JG Speed fit connections, 1/2" (15mm) hose barb inlet, 3/4" (19mm) Hose barb outlet Double check valve to protect against contamination of potable water Internal inlet filter Volts: 12V DC Mountable in any orientation, above or below the toilet mounting bracket included Compatible with the Jabsco toilet series 37045, 37055, and 37075 toilets

Read more less

Tsunami Mk2 T500 Aerator KitThis aerator kit is recommended for fishing boats with built-in livewells that are not equipped with a thru-hull recirculation system. The pump is sealed and can be occasionally submerged; however, the electrical wires must never be submerged.Kit Includes: Aerator spray head SS wire mesh strainer  Pump Straight outlet fitting  Hose  Two hose clamps Specifications: Pump Model: T500 Flow Gal/HR: 500 Amp Fuse: 3 Outlet Hose Inner Diameter: 3/4” (19mm) Two hose clamps Specifications: Gallons Per Hour: 500 Outlet Size: 3/4" Volts: 13.6v Box Dimensions: 5"H x 7"W x 9"L WT: 1.15 lbs

Read more less

Fresh Water Filter Strainer Cover with O-Ring AssemblyFeatures: Strainer Cover For filters used with freshwater pumps

Read more less

Amazon Universal Manual Bilge PumpFeatures: Connections: – for 38 mm (1½ “) bore hose Dimensions: – 240mm long, 210mm wide, 150mm high, with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 100 litres/minute (22 gallons/minute) Flow direction reversible by exchanging inlet and outlet ports Quick-release clamp ring for rapid disassembly Optional through-deck kit permits operation from inside or outside the cabin Push-fit inlet and outlet elbows (1 supplied with pump) increase flexibility of installation Stainless steel handle with bulkhead clips Self-priming up to 4m Packaged Dimensions: L:24.00 x H:16.00 x W:24.00cm Actual Weight: 1.36 Kg  (Approx. 1.86 Kg packed)

Read more less

HotShot HD6 Heavy Duty Washdown Pump - 12V - 6 GPM - 70 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect strainer  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' deluxe HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 70 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 8"W x 18"L WT: 10 lbs UPC: 671880842006 Brochure (pdf)

Read more less

Mastercraft Ballast Pump - 12VThe Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together and your surfing and wakeboarding again.Features: Same electrical connection as original OEM Same mounting as the OEM unit, no need to drill more holes The leader for flexible Impeller Ballast Pumps WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 5"H x 6"W x 10"L WT: 6.8 lbs UPC: 671880629003

Read more less

18916-0040 Replacement Pressure Switch - 40 PSICompatible Series: 31595-Series 31600-Series 31620-Series 31630-Series WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Service Kit F6B-9Impeller is the same as size as 09-812B 12 Blade , width: 1.9" (49.2mm) Diameter: 2-1/4" (57.1mm)

Read more less

Low Pressure Cyclone Centrifugal Pump - 24VSilent running. Single tool servicing. 2m (6 foot) suction lift when wet.A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations.Features: Heavy duty robust design Stainless steel construction Long life DC motor Silent running Anti-clog impeller design Long life mechanical seal Single tool servicing  Specifications: Pump Body: Stainless Steel Port Size: 3/4" pipe threads, available with NPTF threads Flow: 110 Liters/Minute (29.7 gallons/min.) Pressure: Up to 0.6 bar (8.7psi) Impeller: Stainless Steel Anti-Clog Impeller Design Shaft Seal: Mechanical Maximum Current: 4.5 Amp Fuse Size: 7 Amp Motor: Continuously rated Motor life 3500 hours ISO 8846 Marine and USCG Regulations for Ignition Protection ISO 8849 Marine Bilge Pump Standard WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 29.7 GPM Max PSI: 8.7 Volts: 24v Box Dimensions: 6"H x 6"W x 12"L WT: 7.2 lbs UPC: 671880579384 Owner's Manual (pdf)

Read more less

Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Ding DriveMaterial: NitrileDrive Type: Ding Drive - KeywayNumber of Blades: 8Dimensions:Diameter: 2-9/16"Shaft Width: 5/8"Shaft Diameter: 2"Insert Material: BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Spare Motor for Cartridge - 12voltUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 3"H x 6"W x 8"L WT: 0.6 lbs UPC: 729321285520

Read more less

Spare Motor for CartridgeUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications: Type: Replacement Motors Box Dimensions: 4"H x 6"W x 8"L WT: 0.7 lbs UPC: 729321285124

Read more less