Marine Plumbing & Ventilation

Water Booster System - 40 PSI - 4.5GPM - 12VThe Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Kit Consists of:12V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainerWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.5 GPM Max PSI: 40 Volts: 12v Box Dimensions: 9"H x 14"W x 17"L WT: 11.55 lbs UPC: 705474280018 Owner's Manual (pdf)

Read more less

High Bilge Water Alarm - Surface Mount - BlackFeatures: Visual and Audible Alarm Indicator Dual signaling before maximum bilge water conditions exist, sounds an alarm & activates warning light Marine Proven Exclusively designed for the harsh marine environment Sensor has been used in bilge's for over 15 years, not effected by fuel spills or other chemicals Float Sensor Monitors bilge for high water Will not false alarm from morning dew, high humidity, splashes, hose over spray or buildup of oil or contamination Microprocessor controlled Eliminates false alarms from rough seas, chop and vibrationTest/Mute button Tests alarm with a push of a button. Mutes alarm while boater investigates the problem Easy installation Install at the helm or in the cabinCompliant with ABYC Standard H-22 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Quad Pump - 12VDCBILGE-B-DRY is the world’s only Smart Device enabled Dry Bilge System on the market!Enjoy simple installation and customized scheduling control at your fingertips with our Mobile App for Apple or Android devices. Due to size and placement, traditional bilge pumps cannot remove the last few inches of excess water accumulating in your bilge. With BILGE-B-DRY, you can finally eliminate cabin odors, reduce mold or corrosion, and protect your electrical wiring by removing every drop of water from your bilge. Your cabin will be odor-free, and your bilge will be the driest and cleanest at the marina!Why choose BILGE-B-DRY? Take advantage of: The world’s ONLY Smart Device enabled Dry Bilge System on the market with customizable operation!  An efficient, reliable method to remove excess bilge water on all boats, including stepped-hull boats where water sits forward of the “step. Use BILGE-B-DRY after washdown, heavy rain or sea spray accumulation, rough seas, untreated leaks, etc.  Heavy-duty pump enclosure with improved durability, enhanced pump efficiency, and streamlined internal plumbing. A choice of four pump configurations in 12vdc or 24vdc for optimal water removal. The pump diaphragm design can run dry for extended periods without damage. A compact pump design for easy installation in tight or awkward spaces in any orientation (horizontal or vertical). Customized pump scheduling with the free Mobile App for Apple and Android devices.  Quick disconnect wiring harness with optional connection to a helm or float switch.  An environmentally friendly low-profile bilge water pickup design with a replaceable filter system.  Configured to automatically cycle for 2 minutes every 6 hours if you decline Smart Device connectivity. BILGE-B-DRY connects to your Smart Device (if desired) through the free Mobile App on the APPLE & GOOGLE PLAY stores. Customizable operation is at your fingertips with two options:  Run the “TIMER” option up to 20 minutes after boating in heavy seas or upon washdown.  Choose the “SCHEDULE” option for five customizable run times during the day, up to 20 minutes. This is a great option if you will be away from your boat for a few weeks.  Example:  With your Smart Device, schedule your BILGE-B-DRY to run at 9:00 AM for three minutes and again at 3:00 PM for two minutes. The schedules will run daily until canceled. If at 8:00 PM you still see water in your bilge, run the on-demand Timer for up to 20 minutes to remove the remaining water. BBD Quad Pump 12VDC:Four motors/diaphragm pumps20 feet of input tubing provided (for pickup)6 feet of output tubing provided (for discharge)Input tubing diameter (PVC or PU) - 1/4” OD Output tubing diameter (PVC or PU) - 3/8” ODIncluded with your BILGE-B-DRY purchase are low-profile bilge water pickups. Our uniquely designed low-profile bilge water pickup (bracket sold separately) with a replaceable filter helps reduce the harmful overboard discharge of heavy metals, solids, and petroleum. Place the pickups wherever you wish to remove water, such as the lowest part of your bilge, A/C evaporator, or hard-to-reach compartments. Twenty small holes along the bottom of the pickup provide a debris barrier. The pickup’s integrated filter contains a proprietary blend of materials to prevent damage to the BILGE-B-DRY pump and to reduce oil discharge, which, unlike other dry bilge systems, eliminates the need for a secondary filter.For optimum performance of your BILGE-B-DRY unit, replace the low-profile bilge water pickups when the flow rate has decreased. You can choose to replace the filter material or replace the entire pickup. BILGE-B-DRY orders DO NOT INCLUDE the stainless hold-down bracket or inline fuse!Specifications: Meets ISO 8846 standards, Section 5, Protection against ignition of surrounding flammable gases. Power Required:  12 VDC (8 – 14 VDC)  Max current: 1.4 amps (12 VDC)  Idle Current: 0.05 amps (12 VDC)  Pump:  Maximum flow: 1.0 GPM  Pump head: 10 feet  Pump suction: 5 (vertical) feet  Diaphragm design, able to run dry for extended periods without damage  Life expectancy >1000 hours  Control board:  Wireless Connectivity  Life expectancy: 100,000 cycles  Working temperature: - 40 85 °C  Wi-Fi & RF Grant FCC Rule Part 15C  Dimensions (in):  Enclosure: 4.1 H x 6.8 W x 7 L  Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm):  Enclosure: 76 H x 172 W x 177 L  Rectangular Pickup: 25 H x 60 W x 100 L Weight 2.4 LB (not including tubing, pickup, or accessories)  Tubing:  Input tubing: 1/4" Outer Diameter  Output tubing: 3/8" Outer Diameter  Use Polyvinyl chloride (PVC) or Polyurethane (PU) tubing  Hardness Shore A 80 or higher

Read more less

Tap with Swivel Spout - ChromeThis cold-water tap with a swivel spout now features a 1/4 turn ceramic valve.Specifications: Water Connection: 1/2 in. NPS-M Material: Chrome-plated brass body and spout with chrome plated ABS plastic knobs Mounting Hole: 7/8 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

Black Cap & Container for Scandvik Recessed ShowerThis part is a replacement cup and cap for horizontally mounted recessed showers.Features: These caps have a shower symbol on top Black cap and cup Specifications:Mounting Hole: 2-1/4 in.*The "P" within the part number indicates retail packaging

Read more less

Heavy-Duty Brass Tap - Chrome PlatedThis basin tap has a heavy-duty chrome-plated brass body.Specifications: Exposes Tap Part Height: 2-1/2" Water Connection: 1/2 in. NPS-M Material: Chrome-plated brass body with chrome-plated ABS plastic knobs Mounting Hole: 7/8 in. Shipping Weight: 3 lbs. *The "P" within the part number indicates retail packaging

Read more less

Recessed Shower with 6' White Hose - Euro Trigger SprayerThis part is part of the fifth generation of Scandvik recessed showers. Also, this recessed shower has an easy-to-use Euro trigger sprayer handle.Features: White handle, white cup & cap with 6’ white nylon hose Improved UV protection and a better water seal when the cap is closed Built-in grab ring for easy deployment Mounts vertically or horizontally Mounting hardware is included Specifications: Water connection: 3/8 in. BSP-F threaded fitting Material: ABS and chrome-plated brass (push-button) Mounting Hole: 2-3/4 in. Shipping Weight: 4 lbs. *The "P" within the part number indicates retail packaging

Read more less

Bronze Pipe Nipple - 3" NPT Features: Cast-in wrench flat simplifies installation and removal NPT x NPT Connection C83600 Bronze   Full flow   Note-C83600 bronze fittings are not in compliance with NSF-61 and therefore are not intended for use in potable water systems. Specifications: Construction: Bronze Box Dimensions: 4"H x 4"W x 4"L WT: 2.45 lbs UPC: 742985143708

Read more less

1-1/2" Bronze NPS to NPT Flange AdapterIBVF Flanged Adapters have been developed to address several common problems in the marine industry.  Features:   Eliminate dangerous thread miss-match when in-line valves are screwed onto thru hulls Accept standard thru-hulls into the base and standard in-line valves on top Provide a safe and sturdy assembly when in-line valves are used as seacocks For OEMs, prevent valve damage during engine or generator installation - the valve can be installed later Simplifies future valve replacement C83600 Bronze and #316 SS models Specifications: Construction: Bronze Box Dimensions: 5"H x 5"W x 5"L WT: 1.8 lbs UPC: 742985143975

Read more less

3/4" Bronze Flanged Full Flow SeacockFeatures: 1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining. Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands Selectable handle rotation Handle has square hole to accept standard ratchet to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves Full flow C84400 bronze construction Stainless steel ball and stem PTFE seats and seals Serviceable while installed Base has bonding attachment UL Listed 647B Specifications: Construction: Bronze Box Dimensions: 5"H x 6"W x 7"L WT: 3 lbs UPC: 742985002340

Read more less

18916-0040 Replacement Pressure Switch - 40 PSICompatible Series: 31595-Series 31600-Series 31620-Series 31630-Series WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

15' White Coiled Hose with Adjustable NozzleFeatures: 15' White Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 7"W x 17"L WT: 1.3 lbs UPC: 725060044015

Read more less