Seaward 6 Gallon Hot Water Heater with Rear Heat Exchanger - Stainless Steel - 120V - 1500WWhale Electric Water Heaters includes models with the very latest technology. All heaters are manufactured from the highest quality materials and designed to specifically withstand harsh marine conditions.Water Heaters with a Stainless Steel covers offer high levels of corrosion resistance with a modern stainless steel finish. These heaters are a bit lighter than those wearing the galvanized outer cover and heavier than the epoxy coated versions.Features and Benefits
Robust Manufacturing
Safety controls
Magnesium anodes available separately
Sturdy, robust exteriors
Ignition protected
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons: 6
Heat Exchanger: Yes
Volts: 120v
Box Dimensions: 14"H x 14"W x 22"L WT: 23.4 lbs
UPC: 766478947925
3-Way Auto/Off/Manual Bilge Pump SwitchPart #: 7615A3Panel-mounted rocker switches for use with pump that draws 10 amps or less.Features:
1/4" spade terminals
6-volt through 32-volt D.C. only
10 amps maximum
Plate is 2-13/16" x 1-7/8"
Hole size is 1-1/2" x 7/8"
Caution: Bilge pump switches are not external ignition protected.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Volts: 12/24v
Type: Switches
Box Dimensions: 1"H x 3"W x 5"L WT: 0.1 lbs
UPC: 022697761590
Quick Guide (pdf)
Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service
GPH (Gallons Per Hour): 1200
90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduces time and effort
Service pump cartridges from hard-to-reach areas using only one hand
Specifications:
Rated Volts DC: 12V
Fuse Size: 5 Amp
Wire Length: (inch) 29" / (mm) 735
Hose Diameter: (inch) 1" and 1-1/8"
*Must be used with appropriate Tsunami outlet Specifications:
Gallons Per Hour: 1200 GPH
Gallons Per Minute: 20
Operation: Non-Automatic
Outlet Size: 1" or 1-1/8"
Type: Pumps/Drives
Volts: 12v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.25 lbs
UPC: 022697024152
Quick Guide (pdf)
Grey Waste Tank Lid Replacement with SensorThe Grey Waste Tank enables the user to manage all grey waste on board easily, through one skin fitting. The Intelligent Control sensor integrated into the tank lid provides automatic operation of the grey waste pump. The sensor will detect water in the grey waste tank at a pre-determined level, and will automatically activate the grey waste pump. When the tank is emptied, the switch will automatically turn the grey waste pump off . The 2 sensor models include a second sensor which can be used to control a second grey waste pump. It is factory set to activate at a higher water level and will provide additional pumping capacity during periods of high infl ow to the grey waste tank. Alternatively, the second sensor can be wired to a high level alarm, warning of a high water level within the grey waste tank. The Grey Waste Tank is designed to collect grey shower waste water. If it is intended for use for any other purpose or with any other liquid, it is the user’s responsibility to ensure that the tank and switch are suitable for the intended use and, in particular, that the materials are fully compatible with the liquids to be used. The integrated Intelligent Control sensor is designed to operate at 12V d.c or 24V d.c. only. The sensor is suitable for use with pumps operating with current up to 20A, and is recommended for use with Whale Gulper® 220 or Gulper® 320 grey waste pumps.
Tsunami Mk2 T800 Aerator - 12V - 90-Degree InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:
3-1/2" x 3/4" thru-hull
Flexible installation with both 90 and straight inlets and outlets
Full backward compatibility with previous Tsunami models
Faster, smarter installation with no sealant or tools is required
Specifications:Flow Gallon/Hour: 800 Specifications:
Gallons Per Hour: 800
Inlet Style: Angled
Volts: 12v
Box Dimensions: 4"H x 8"W x 9"L WT: 1.5 lbs
UPC: 022697025449
FW1215 Watermaster Automatic Pressure Pump - 12L - 45PSI - 12VElectric pump range for smooth constant water supply.Whale Watermaster Automatic Pressure Pump. For more than a decade we have refined our pressure pump designs to ensure long term reliability and efficient performance. The Whale Watermaster gives smooth consistent flow at a variety of outlets.Power
High flow rates at a variety of outlets
Smooth Constant Flow
Self Priming Up To 3m (10ft)
Performance
Quiet Operation
Automatic Operation - Plug 'n' Play
Easy Installation - Suitable For 15mm Quick Connect Plumbing or 1/2" threaded hose connections
Suitable For Use With Salt or Fresh Water
PLUS Protection
Fully Sealed Protective Motor Housing
Completely Integrated Electronics
IP65 Rated - No Water Ingress
Runs Dry Without Damage
Includes strainer to protect pump from debris
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 3 GPM
Max PSI: 45
Volts: 12v
Box Dimensions: 6"H x 8"W x 10"L WT: 4.4 lbs
UPC: 766478946966
FW1225 Watermaster Automatic Pressure Pump - 12L - 45PSI - 24VWhale Watermaster Automatic Pressure Pump. For more than a decade we have refined our pressure pump designs to ensure long term reliability and efficient performance. The Whale Watermaster gives smooth consistent flow at a variety of outlets.Power
High flow rates at a variety of outlets
Smooth Constant Flow
Self Priming Up To 3m (10ft)
Performance
Quiet Operation
Automatic Operation - Plug 'n' Play
Easy Installation - Suitable For 15mm Quick Connect Plumbing or 1/2" threaded hose connections
Suitable For Use With Salt or Fresh Water
PLUS Protection
Fully Sealed Protective Motor Housing
Completely Integrated Electronics
IP65 Rated - No Water Ingress
Runs Dry Without Damage
Includes strainer to protect pump from debris
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 3 GPM
Max PSI: 45
Volts: 24v
Box Dimensions: 6"H x 8"W x 10"L WT: 4.2 lbs
UPC: 766478952387
1/2" x 50' Box Black HD Water Hose 200 PSICost-effective, Hi Temp, EPDM rubber, polyester reinforced, and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat, and serve a variety of boat and plant pressurized applications (water & air delivery) #132 is 2 spiral, 200PSI (1.38MPa) W.P. Operating Temp. -40°F to 212°F (-40°C to 100°C).Specifications:
Sizes: 1/4" to 1-1/2", 6.3mm to 25mm
Colors: Black
Packaging: Reels 750’-250’ (230-75m), Boxed 50’ (15m)
Specifications:
ID Diameter (inches): 1/2"
Length (Feet): 50
Box Dimensions: 5"H x 18"W x 18"L WT: 10.5 lbs
UPC: 704917005706
1-1/8" x 50' Box VAC X.H.D. Sanitation HoseExtra heavy-duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and (FDA) potable water fill. Also for critical bilge, drain scuppers, live wells, etc. Hard PVC helix gives good flexibility and bend radius. No cuffs required.* Don’t use with alcohols, antifreeze, petrochemicals, or solvents. Self-draining installations are recommended for the longest odor-free service. Max. operating temps: +10° to +140° F (-12° to +60°C).Specifications:
Sizes: 5/8" to 1-1/2", 16mm to 38mm
Colors: White
Packaging: Coils: 50' (15m), 100' (183m), Boxed: 50' (15m), 25' (7.6m)
Specifications:
ID Diameter (inches): 1-1/8"
Length (Feet): 50
Box Dimensions: 8"H x 22"W x 23"L WT: 12.4 lbs
UPC: 704917006314
Upper Assembly Replacement for 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 Washdown PumpsThis Shurflo upper assembly replacement is for the 4248/4258 Series Pro Blaster II Deluxe 4.0/5.0 washdown pumps listed below:
Shurflo Pro Blaster II Deluxe 4.0 (4248-153-A09 [4248-153-E09])
Shurflo Pro Blaster II Deluxe 4.0 24 VDC (4248-163-A09 [4248-163-E09])
Shurflo Pro Blaster II Ultimate 5.0 (4258-153-A09 [4258-153-E09])
Shurflo Pro Blaster II Ultimate 5.0 24 VDC (4258-163-A09 [4258-163-E09])
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)
Automatic Switch AS888For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32 V systems. Use AS888 for a better and safer life afloat!
Complete Purasan EX Treatment System - 12VRaritan Purasan Waste Treatment System is suitable for all marine sanitation needs. The Purasan EX was originally developed for the freshwater lakes in Kentucky as an alternative to the Lectra/San.This Type I Marine Sanitation Device (MSD) has become increasingly popular with many users in both salt and freshwater. Raritan believes that treating a single flush at the source and discharging into tidal water is far more effective than risking having a holding tank dumped overboard when a pump-out cannot be found or is not functioning. Each user has unique needs when boating and for many a holding tank may be the best solution while some prefer to treat and discharge. There are a few things to consider when choosing a Type I MSD.While Treatment is required inside the three-mile limit there are areas that prohibit discharge from Marine Sanitation Device. The areas that do not allow discharge of any type are called No Discharge Zones and these zones are specific, at this time, to treated black water only. So, any vessel operator or owner should consider the amount of time spent cruising, the areas in which they will be cruising and the availability of pumpouts. A holding tank should never be discharged overboard.The Purasan EX is a flow through system which means that the toilet is connected to the tank and the tank is connected to the thru-hull. With each flush of the toilet the waste enters the tank where a small amount of disinfectant is introduced to neutralize the waste. At the same time an equal amount of treated waste is forced out of the tank and overboard.Purasan ImprovementsThe tablets used are very similar to the mixture used in commercial waste water treatment plants. When the toilet flushes a small amount of water is run over the tablets to create a disinfectant that drains into the tank and a high-speed macerator inside the tank breaks down waste and ensures that the disinfectant comes in contact with the waste. This system does require the user to buy tablets to keep the system functioning properly. While the original Purasan remained largely unchanged for a long time the newest version the Purasan EX has added a control that will notify the user when tablets need to be added.Another improvement in the Purasan EX over the original design is the addition of an air pump that forces the water down into the treatment tank. This makes mounting of the system easier and prevents the tablets from disintegrating too fast. While it was originally designed for just freshwater use and for use with specific toilets it can now be used with almost any marine toilet. The only freshwater required is the water that passes over the tablets. However, toilets can flush with either salt or freshwater.