Rule 2000Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8" (28.6mm) discharge outlet. 12 Volts DC unless noted.Features:
Fully Submersible
Easy clean snap lock strainer
Silent and vibrationless operation
Anti-airlock protection
Compact, efficient long life motor
Ignition protected
No burn-out when run dry
Rust and Corrosion protection
Used by leading boatbuilders worldwide
marine grade blocked wiring
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 1-1/8"
Volts: 12v
Type: Electric
Box Dimensions: 5"H x 6"W x 7"L WT: 3.1 lbs
UPC: 042237083326
Owner's Manual (pdf)
White Plastic Thru-Hull Fitting - 1-1/8" Inner DiameterThis thru-hull fitting is made with a durable, thermoplastic construction, which prevents electrolysis.Specifications:
Hose Size: (inch) 1-1/8" Inner diameter
Stem Length: (inch) 3-1/4"
Max Hull Thickness: (inch) 1-1/4"
Flange Diameter: (inch) 2-1/4"
Installation Hole Size: (inch) 1-3/8"
Drain Plug: (inch) 7/8"
Construction: Polypropylene
Color: White
*Plastic thru-hull connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/8"
Material: Plastic
Box Dimensions: 3"H x 4"W x 7"L WT: 0.25 lbs
UPC: 022697387431
Quick Guide (pdf)
Locking Fuel Fill Insert(0525)
Black Plastic with Zinc Alloy Lock Cylinder
Dual purpose key opens fill cap & locking insert
Fits most PERKO vented fills
Quick Guide (pdf)
Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications:
Hose size: (inch) 1-1/8" inner diameter
Flange Diameter: (inch) 2-1/4"
Thread O.D. (outside diameter): (inch) 1-3/8"
Thread Length: (inch) 2-3/8"
Barb Length: (inch) 1-1/4"
Total Length: (inch) 3-7/8"
Install Hole Saw Size: (inch) 1-1/4"
Thread NPSM: (inch) 1"
Max Hull Thickness: (inch) 1-3/4"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1-1/8"
Material: Stainless Steel
Box Dimensions: 2"H x 4"W x 7"L WT: 0.85 lbs
UPC: 022697665492
Quick Guide (pdf)
Aqua O2 Twin Port 500 GPH Aerator Pump - Flex Mount - 12VJohnson Pump cartridge aerator pumps offer ease of convenience and years of reliable service. This pump has an improved design with an easy-to-change/replace motor cartridge.Features:
All Aqua O2 Cartridge Aerator Pumps offer the convenience of using only one intake for both the livewell and washdown pump
Includes a 3/4 NPT seacock inlet
High-flow impeller design
Quick-change motor connection
360-degree pump discharge rotation
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Upgradable motor cartridge
Dual-port inlet
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Reorient discharge in any direction
The common body allows interchangeable motor cartridge replacement in the same or different size
Corrosion-resistant and extended life
Allows single transom intake for dual intake pump application
Can increase or decrease capacity according to the environment and flow needed
Choose the correct intake for the application
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
Unmatched versatility for ease of installation
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 585 GPH (37 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 9.6 oz
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Specifications:
Gallons Per Hour: 500 GPH
Inlet Style: Seacock
Volts: 12v
Box Dimensions: 3"H x 5"W x 8"L WT: 1.2 lbs
UPC: 7330717017835
Quick Guide (pdf)
BS-25 Stainless Steel Basket for BVS-1500This is a direct replacement basket for the BVS series strainer. The redesign fixes a few design issues concerning past model complications. The BS-25 basket is constructed of stainless steel.Features:Stainless Steel Basket Fits:BVS-1500 Specifications:
Material: Stainless Steel
Box Dimensions: 4"H x 4"W x 9"L WT: 0.55 lbs
UPC: 742985191181
Heavy Duty RV Water Pump with Strainer - 12V - 4GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
4 GPM (15 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Replacement Belt Kit for Lite FlushSpecifications:
9mm Drive Belt
Packaged Dimensions: L:5.00 x H:5.00 x W:5.00cm
Actual Weight: 0.10 Kg (Approx. 0.30 Kg packed)
Aqua Void Automatic 500 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features:
High-flow impeller design
Quick-change motor connection
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Smaller profile than pumps with switches
Straight or 90-degree dura port discharge ports with an included check valve
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Clip-in basket
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Automatically monitors the presence of water through low-amp draw impeller spin
The common body allows interchangeable motor cartridge replacement to the same or different size
For tighter fit in smaller spaces
Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow
Corrosion-resistant and extended life
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
100 days of service before critical battery draw down*
Automatically monitors the presence of water through low-amp draw impeller spin
Ease of installation & maintenance
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
Specifications:
Gallons Per Hour: 500 GPH
Operation: Automatic
Outlet Size: 3/4"
Type: Pumps/Drives
Volts: 12v
Box Dimensions: 4"H x 5"W x 6"L WT: 1.2 lbs
UPC: 7330717018184
Quick Guide (pdf)
Ballast PumpThis Wake/Surf boat Ballast pump is the same one utilized by most major boat builders. The Jabsco pump comes standard with a green Run Dry Impeller. This pump has the standard electrical quick connector installed. Just connect your hoses, mount the pump into the boat, in its orginal position, plug the power leads together and your surfing and wakeboarding again. Impeller # 6303-0007-P - Always Carry a Spare
Orignial OEM Ballast Pump Replacementttttt
Run Dry Impeller - Greentttt
Same electrical connection as Original OEM ttttt
Same mounting as the OEM unit, no need to drill more holesttttt
The leader for Flexible Impeller Ballast Pumps
ttttttWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)