Marine Safety - Accessories

MOB+ xBAND - RedThe MOB+ xBAND is a highly durable marine-grade silicone wristband.  This enables you to use the xFOB at your wrist, so it's always on and never intrusive.  The xFOB fits perfectly inside the wristband.*xBAND™ works with the MOB+ xHUB and xFOB (both required and sold separately)Features: xFOB fits inside the wristband Comfortable fit and adjustable size Unique and patented locking mechanism Highly durable silicone rubber Size - 5.3" to 8.5" (circumference) Weight - 0.35 oz. (10 g) *Sold as an Individual Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 5"L WT: 0.2 lbs UPC: 850022007408 Owner's Manual (pdf)

Read more less

MOB+ Multi-Engine Harness Kit The MOB+ Multi Engine Wiring harness kit is designed to be used with the MOB+ xHUB for multiple outboard installations. Typically, this accessory is only needed for Yamaha powered multiple engine boats but can be used in other situations. Kit is suitable for twin and triple engine boats.*Sold as an Individual Specifications: Type: Parts Box Dimensions: 1"H x 3"W x 7"L WT: 0.2 lbs UPC: 850022007712 Owner's Manual (pdf)

Read more less

MOB+ xBAND - YellowThe MOB+ xBAND is a highly durable marine-grade silicone wristband.  This enables you to use the xFOB at your wrist, so it's always on and never intrusive.  The xFOB fits perfectly inside the wristband.*xBAND™ works with the MOB+ xHUB and xFOB (both required and sold separately) Features: xFOB fits inside the wristband Comfortable fit and adjustable size Unique and patented locking mechanism Highly durable silicone rubber Size - 5.3" to 8.5" (circumference) Weight - 0.35 oz. (10 g) *Sold as an Individual Specifications: Type: Parts Box Dimensions: 2"H x 4"W x 5"L WT: 0.5 lbs UPC: 850022007439 Owner's Manual (pdf)

Read more less

Replacement Single BobbinReplacement bobbin for inflatable life jackets and vests using Halkey Roberts Auto and Auto/Manual Inflators: V85000, V86000, V9000,0, and V95000. The bobbins do not constitute a complete rearming kit but work as a substitute if the bobbin on your life jacket or in your kit is damaged. Be sure to check your life jacket and inflation system to match the products needed.  Using the wrong components can be dangerous on the water.Features: Replacement bobbin for inflatable life jackets and vests using Halkey Roberts Auto and Auto/Manual Inflators: V85000, V86000, V90000, and V95000 Bobbins are good for five years from the manufacturer's date It is recommended to change the recreational use of bobbins every 3 years. Includes 1 Bobbin The expiration date is printed on the Bobbin Assembly

Read more less

Accessory Pocket - OrangeThe MA6000 Accessory Pocket is designed to attach to the waist belt of all Mustang Survival Inflatable PFDs.  It is ergonomically designed to provide you with easy access to your personal survival equipment or other items.  All seams are finished with additional reinforcement and a 400-denier nylon outer shell. Wearing the Accessory Pocket voids the Canadian ULC approval for the PFD and in the United States, wearing the Accessory Pocket voids the US Coast Guard approval.Features: Attaches to all inflatable PFD waist belts Ergonomically designed stowage provides easy access to personal survival equipment All seams are finished with additional reinforcement  Front pocket for quick access to items  Technical Specifications: Material - 400 D Nylon Color - Orange Dimensions (L x W x H) - 10" x 1" x 6" Weight - .2 lb *Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 1"H x 6"W x 9"L WT: 0.2 lbs UPC: 062533072008

Read more less

Re-Arm Kit E 33g - Automatic/Manual The 1F Automatic and 3F Manual Inflatable PFD Re-Arm Kit E, contains everything necessary to re-arm your inflatable after deployment.  The automatic inflator bobbin on all automatic PFDs should be replaced on a regular basis.  Note - This re-arm kit replaces discontinued re-arm kits MA7202 and MA7203 Use only Mustang Survival re-arm kits.  Use of other re-arm kits may result in improper operation or failure to operate and will void the product's warranty.Compatible With:MD2051, MD2053, MD2981, MD2085, MD2087, MD2983, MD2951, MD2953, MD3051, MD3052, MD3053, MD3054, MD3071, MD3075, MD3081, MD3082, MD3083, MD3084, MD3085 and MD3087.Technical Specifications: Inflation - Automatic and Manual  Grams - 33 In the Box: One 33gram CO2 cylinder  One (1) bobbin (use only with automatic inflatables)  Re-arming instruction manual *Sold as an Individual WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 10"L WT: 0.6 lbs UPC: 062533122895 Brochure (pdf)

Read more less

Ignition Safety Kill Switch Marine emergency cut-off Kill Switch attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. The ignition (gray cap) version functions in applications where the circuit is normally closed (complete) with lanyard clip in place on switch. When lanyard is pulled and clip is removed from switch, circuit is open (not complete), resulting in interruption of current to ignition and shutting off engine. The kill switch includes a coiled lanyard that is approximately 15" when coiled and 48" when stretched, which should be replaced if worn, cut, or frayed. Mounting hole is 5/8" in diameter. Maximum panel thickness: 5/8". Maximum 5A draw. WARNING: Switch should be tested for proper function before each use. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

System Ready Panel Warning Light The green warning L.E.D. provides constant monitoring of the fire suppression system when the ignition switch is On.  Complies with U.S. Coast Guard requirements for system approval.This 2" round indicator light has an adhesive back aluminum plate for easy panel mounting and requires a 5/16" hole for wire routing.Standard with all pre-engineered fire extinguishing systems.Compatible With:MA2, CG2 and GA suppression systems *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 3"H x 4"W x 4"L WT: 0.2 lbs UPC: 619749209980

Read more less

Whistle/Mirror KitAudible and visual signal for dry areas. Help rescuers note there is an emergency and guides them to your location. Audible signal will not freeze. Mirror (2 x 3) with lanyard and view finder. Made of plastic for durability. Help rescuers know there is an emergency and guide them to your location. Weighs only 2 ounces.Features: Attract rescuers with sight and sound High decibel whistle Unbreakable mirror with view finder and lanyard WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Manual Discharge Cable Kit - 28'Designed for manual activation of the MA and GA Series of fire suppression systems.  The manual discharge cable kit is a backup for those who prefer the extra measure of control or for inspected vessels who are required by U.S. Coast Guard regulation. Compatible With:MA, MU, MA2, GA, GA1 and GA2 Series of fire suppression systemsFeatures:  Easily routed with engine cables and electrical wiring  Various lengths for vessel specific installation  In the Box: Cable - 28' Mounting plate Pull handle Safety pin *Sold as an Individual  Specifications: Type: Parts Box Dimensions: 1"H x 15"W x 16"L WT: 2.7 lbs UPC: 619749311270

Read more less

HandHeld Electric Horn - BlueThe Hand Held Electric Horn features a weatherproof build and shock resistant construction. Meets all US Coast Guard requirements.Features: Solid state electronics Shock resistant construction Size: 7" high x 2.75" wide Meets US Coast Guard requirements Requires one 9-volt battery, not included Specifications: Color: Blue Box Dimensions: 4"H x 7"W x 12"L WT: 0.4 lbs UPC: 601373545176

Read more less

Fluorescent Dye Marker - 2-PackPowder that turns snow or water into a bright fluorescent green signal.  You can write in the snow or on the ground.  Serves as an excellent signal for rescuers to mark your location.Features: Environmentally Safe Waterproof Container 2-Pack WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less