Newest Products

AD1200.4 4-Channel AmplifierDesigned for the harshest conditions, this Class D digital amplifier delivers high-performance power with a compact footprint, making it the perfect choice for marine, powersports, and multi-environment applications.Specifications: Environmental Protection: IP65 Rating Power Output (Max) @ 4 Ohms: 760W (4x 190W) Power Output (Max) @ 2 Ohms: 1,200W (4x 300W) RMS @ 4 Ohm (Bridged): 4x 520W Frequency Response: 20Hz - 20kHz Signal-to-Noise Ratio: 90dB THD: ≤0.5% Input Sensitivity: 12V - 0.2V Best Efficiency: >80% Minimum Load: 2 Ohm Current Draw: 103A Overload Protection System: Yes Overheat Protection Temperature: 75°C Operating Voltage: 9V - 16V DC Owner's Manual (pdf)Brochure (pdf)

Read more less

IC-M510 PLUS VHF Marine Radio with AIS Stay in touch from anywhere on the boat with the IC-M510 Plus fixed mount Marine VHF Radio with AIS. Icom’s Class D DSC fixed-mount VHF Marine Radio with AIS receive capability.  The IC-M510 Plus is nearly half the depth of the M506, allowing installation in more confined spaces.  The large color display has a simple user interface, allowing casual and serious boaters alike plenty of options to communicate. Use the RS-M500 app (for iOS™/Android™) to remotely control the IC-M510 through WLAN.  Up to three smart devices can be used as a wireless microphone or remote controller in substitute for the COMMANDMIC™.With its integrated AIS receiver, the IC-M510 Plus can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.The intercom function between your smart device and the radio is also available.  Features: Large color display - 3.5" TFT LCD S-M500 app ( iOS® or Android™) allows you to connect three (3) smart devices to function as a wireless command speaker/microphone Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS Technical Specifications: Output Power - 25W Frequency Range - Transmit - 156.025 to 157.425 MHz Frequency Range - Receive -  156.050 to 163.275 MHz  Waterproof Rating - IP68 GPS - Built-in WLAN - Built-in Connectivity - NMEA 0183 (NMEA 2000™ with the addition of the CT-M500) Features: Hand microphone with AquaQuake™ Front and back microphone connection ports Optional voice scrambler External speaker connection Supports 4-digit channels Option to connect external GPS In the Box: IC-M510 Plus VHF radio with AIS Speaker microphone (HM-250RB) DC Power cable Microphone hanger Mounting bracket kit Instruction manual  *Sold as you Individual Specifications: AIS: Yes Built-In GPS: Yes Color: Black Hailer: Optional Intercom Capability: Yes NMEA 2000: Optional Remote Mic Capable: Yes Scrambler Capable: Yes Box Dimensions: 7"H x 9"W x 11"L WT: 4.2 lbs UPC: 731797039866 Owner's Manual (pdf)Brochure (pdf)

Read more less

GP1871F 7" GPS/Chartplotter/Fishfinder 50/200, 600W, 1kW, Single Channel & CHIRPPowerful technology in a compact 7" Chartplotter with a built-in CHIRP Fishfinder!Multi-Touch Interface - Convenient and intuitive slide-out menusThe GP-1871F smart interface, inherited from the NavNet TZtouch2, features slide-out menus containing all the tools and data you need to be in total control.Display modes customizationCustomize your display modes and create the perfect combination to fit your individual needs.Finger GesturesWith the Finger Gestures (one or two fingers) you can either zoom-in, zoom-out, double tap to take a screenshot or even jump to a full-screen mode when using Split-screen display mode. Detailed Chart with C-MAP 4D compatibilityBy using the incredibly rich C-MAP 4D charts, the GP-1871F/1971F delivers highly precise data that features plenty of useful information, such as relief vectors, tidal streams and marine plans, considerably enhancing your navigational awareness.Autopilot controlsVia the CAN bus network interface, The NAVpilot-300 and NAVpilot-711C can be connected to the GP-1871F and GP-1971F and controlled directly from the Chart Plotter. Unmatched detail with TruEcho CHIRP™The high level of detail available with TruEcho CHIRP™ technology helps to distinguish fish schools, even when close to the sea bed.Fish can be observed with a very high resolution and are displayed in a distinct boomerang shape. The clear presentation marks individual game fish and bait fish, even when tightly schooled together.ACCU-FISH™ and Bottom Discrimination with RezBoost™With FURUNO’s RezBoost™ data processing technology, fish schools and echoes are shown with high resolution while you can assess fish size and bottom composition thanks to ACCU-FISH™ and Bottom Discrimination functions.Additionnaly, ACCU-FISH™ icons and colors can be freely customized according to the size and depth of the targeted fish. DRS4W 1st Watch Wireless RadarThe GP-1871F and GP-1971F are connectable to the 1st Watch Wireless Radar (Output Power 4 kW) giving your Chart Plotter a major upgrade in accuracy and safety.Easy screenshot and MicroSD cardTap the display with two fingers to capture a screenshot that will be saved directly to your microSD card.Features: Consistent "all-glass" design and GUI (similar to TZtouch2), with multi touch, slide out menus and edge-swipe gesture controls 7" Wide-aspect, bright (1000 cd), multi touch LCD (800 x 480 Resolution) with anti-fingerprint and anti-reflective coating Built-In 1kW TruEcho CHIRP and Conventional Fish Finder with Accu-Fish, RezBoost and Bottom Discrimination Built-In 72 channel GPS WAAS, EGNOS, MSAS Core and antenna Built-In wireless for use with DRS4W Radar & C-MAP C-Weather downloads Radar overlay capability with DRS4W (optional heading input required) Compatible with C-MAP 4D MicroSD Worldwide Cartographic Database Compatible with Navionics+ and Navionics Platinum with software version 4.0 on the Unit C-MAP C-Weather for Wind, Wave, Weather, Humidity and Temperature Autopilot control when integrated w/NavPilot 711C or NavPilot 300 Certified NMEA2000/NMEA0183 Interface (full NMEA0183 output with SW update) Accepts AIS data in both NMEA0183 & NMEA2000 formats Built-In simulation: Internal demo slideshow and simulation modeThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cartography Brand: Navionics/C-Map Screen Size: 7" Touchscreen: Yes Transducer Included: No Box Dimensions: 10"H x 12"W x 15"L WT: 5.4 lbs UPC: 611679364548 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

12V DC Dual USB Charger Socket - WhiteEasy to install in existing 12V DC socket hole providing convenient access for charging mobile devices.Specs: Maximum Output Current: 2.1A DC Cut Out Dimensions: 1 1/8 in (28.58 mm) dia. hole Input Voltage: 12V DC Input Voltage Range: 9-16V DC Output Voltage: 5V DC +/- 5% Parasitic Current Draw: 15mA DC Reverse Polarity Protection: Yes Short Circuit Protection: Yes Thermal Overload Protection: Yes WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Inverter 12/250 120V VE.Direct Nema 5-15RThe VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut -off and restart levels Dynamic cut -off: load-dependent cut-off level Output voltage 2 10 - 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring - In- and output voltage, % load and alarmsProven reliability - The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against o verheating, whether due to over load or high ambient temperature.High start-up power - Needed to start loads such as power co nverters for LED lamps, halogen lamps or electric tools.ECO mode - When in ECO mode , the inverter will switch to stan dby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds) . If the load exceeds a preset level, the inverter will remain on.Remote on/off - A remote on/off switch can be connected to a two-pole connecto r, or between battery plus and the left-hand contact of the two-pole connector.To transfer the load to another AC source: the automatic transfer switch - For our low power inverters , we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.DC connection with screw terminals - No special tools needed for installationOutput Sockets - Nema 5-15RPlease contact your dealer for any returns, repairs or support issues related to this product. Specifications: AC Connection Type: Outlet DC Connection Type: Hardwire GFCI: Optional Inverter Cont. Output Wattage: 200W Inverter Input Voltage: 120VAC Inverter Output Voltage: 12VDC Inverter Surge Rating: 400W Outlet Qty: 1 NEMA 5-15R Owner's Manual (pdf)Brochure (pdf)

Read more less

Inverter 24/250 120V VE.Direct Nema 5-15RThe VE.Direct port can be connected to: A computer (VE.Direct to USB interface cable needed) Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed) Fully configurable: Low battery voltage alarm trip and reset levels Low battery voltage cut -off and restart levels Dynamic cut -off: load-dependent cut-off level Output voltage 2 10 - 245V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode sense level Monitoring - In- and output voltage, % load and alarmsProven reliability - The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against o verheating, whether due to over load or high ambient temperature.High start-up power - Needed to start loads such as power co nverters for LED lamps, halogen lamps or electric tools.ECO mode - When in ECO mode , the inverter will switch to stan dby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds) . If the load exceeds a preset level, the inverter will remain on.Remote on/off - A remote on/off switch can be connected to a two-pole connecto r, or between battery plus and the left-hand contact of the two-pole connector.To transfer the load to another AC source: the automatic transfer switch - For our low power inverters , we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption.DC connection with screw terminals - No special tools needed for installationOutput Sockets - Nema 5-15RPlease contact your dealer for any returns, repairs or support issues related to this product. Specifications: AC Connection Type: Outlet DC Connection Type: Hardwire GFCI: Yes Inverter Cont. Output Wattage: 175W Inverter Input Voltage: 24VDC Inverter Output Voltage: 120VAC Inverter Surge Rating: 400W Outlet Qty: 1 NEMA 5-15R Owner's Manual (pdf)Brochure (pdf)

Read more less

450 Downrigger Trolling CaddyThe 450 Downrigger Trolling Caddy provides anglers with the perfect solution for keeping their gear organized, accessible, and ready for action.Whether you’re a weekend warrior or a seasoned pro, this all-in-one caddy is built to handle your most common trolling tackle, tools, and accessories with ease.Built with the same level of durability anglers expect from a Scotty product, it can be easily installed on your existing 1026 Pedestal Swivel Mount or hard-mounted directly to your boat.Features: Tray for pen / small terminal tackle Self-locating snap holder Toothpick wedge Hard mounting option (screws not included) Pliers holder Line cutters/nail clippers holder Swivel mount option Line release holder (e.g. Power Grip) Anchovy head pins holder Lure hook hanger Flasher hanger Downrigger chassis bolt holder Dimensions: 7″ (L) x 4.25″ (W) x 1.75″ (H)

Read more less

Aleph AL3 1012D Windlass - 12V, 1000W, 10MM Gypsy to 5/8" Rope with DrumThe AL3 vertical windlass features a hard-anodized aluminum construction, an IP67 watertight motor, an inspection lid, and an emergency manual lift system, making it suitable for boats with limited deck space. The unit includes a gearbox, solenoid, clutch handle, and mounting hardware. Features: For 33-46FT Boats Vertical windlasses 10mm - 3/8" gypsy Requires 5/8" three-strand polyester rope  Includes T6315-12 Solenoid Base in anodized aluminum with hard oxide With drum Rope and chain on a single gypsy Integrated sensor and magnet for chain counter  Manual Free-Fall system Emergency manual lift system Supplied with pressure lever Inspection lid IP67 watertight motor Technopolymer gearbox (700W / 1000W) Specifications: Motor power - 1000 W Motor supply voltage - 12 V Maximum pull - 1000 Kg / 2204 lb Maximum working load - 370 kg/816 lb     Working load - 120 kg/264 lb Current absorption @ working load - 140 A  Maximum chain speed - 39,6 m/min 129.2 ft/min Maximum chain speed @ working load - 20,4 m/min 66.9 ft/min Weight  -19,7 Kg / 43 lb

Read more less

Nucleo GXThe Nucleo GX is a compact, high-performance GX device that offers Ekrano GX-level speed at a lower cost.Powered by a quad-core processor, it connects up to 25 devices via VE.Direct and USB, plus more via VE.Can, and provides real-time monitoring of battery status, power consumption, and PV, generator, or mains input, along with automated generator start/stop and alerts. Where needed, the I/Os can be extended with the following optional USB accessories: the MK3-USB interface, GX I/O Extender 150, or GX Tank 140.The system can be managed from anywhere through Remote Console on the VRM Portal, the VictronConnect app, or a web browser. For local display and control, an Android GX WiFi Display can be added.With its focused feature set, the Nucleo GX is an ideal choice for ESS and off grid installations built around the Multi RS.Please contact your dealer for any returns, repairs or support issues related to this product. Owner's Manual (pdf)Brochure (pdf)

Read more less

Gulper Toilet Pump - 12VThe Whale Gulper Toilet Pump is designed to manage unmacerated toilet waste and is ideal for holding tanks and vacuum systems.Features: Pumps unmacerated toilet waste Extra large 1-1/2" ports for consistent flow Can run dry without damage Virtually unblockable 360° rotatable inlet and outlet Rubber mounting feet absorb vibration Self-priming up to 9.8 ft Pumps a mixture of air and waste Ignition protected Large single diaphragm Easy to maintain – no moving parts to clog CE marked 1-year warranty

Read more less

Gulper MK2 Toilet Pump - 24VA non-clog, no filter waste pump to deal with unmacerated toilet waste.  Gulper pumps are built on more than two decades of leading technology.Features: Virtually unblockable  Pumps a mixture of air and waste Runs dry without damage Specifications: 3 Year Warranty CE certified Meets IAO 10133, ISO 8846, IP45

Read more less