Outdoor - Weather Instruments

Wireless Leaf & Soil Moisture/Temperature StationProduct DescriptionSolar-powered station includes transmitter and battery inside weather-resistant shelter.Sensors are sold separately, letting you build the station that matches your needs. To view the data, add a wireless Vantage Pro2 console/receiver (#6312) or Weather Envoy (#6316), and a wireless Vantage Connect (#6620) or WeatherLink. Not compatible with original Vantage Pro stations.* Note: Compatible with Vantage Pro2 US version only; not compatible with original Vantage Pro (Vantage Pro'1'), Vantage Pro2 EU, UK or OV versions. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8MThe Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Cat Hawk uses the same Vane Arm as the Hawk with all the benefits of Balance, "V" Jewel bearing, weight and UV Protection that it brings. The reference arms can be set for either upwind or downwind angles. The Support Rod is aluminum and has the Hawk quick mount clip for quick rigging and de-rigging. Specifications: Vane Arm length 25cm (9.8") Weight 30 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 4"W x 13"L WT: 0.25 lbs UPC: 652773100304

Read more less

AeroCone® Rain Collector with Vantage Pro2™ Mounting BaseStand-alone rain collector with a flat mounting base replaces the rain collector on your Vantage Pro2 sensor suite so it can be installed separately; or as part of an EnviroMonitor system. Rain cone designed for even more accurate data in especially high winds!Takes the place of the rain collector on a Vantage Pro2 sensor suite for a siting that requires separation of the rain collector and temperature/humidity sensor.Designed to meet the guidelines of the World Meteorological Organization, our self-emptying tipping-bucket design is exceptionally accurate. Used to display daily and accumulated rainfall on our weather stations as well as rate of rainfall.Comes with 40′ (12 m) standard cable. Rain collector can be user-calibrated for 0.01″ or 0.2 mm. Also available as a factory-calibrated 0.2 mm rain collector.Requires: EnviroMonitor Node and Gateway, OR Vantage Pro2 sensor suite or Sensor Transmitter Kit and a receiver or console such as Vantage Pro2 console or Vantage Vue console, WeatherLink Live, Weather Envoy, or Vantage Connect. Includes: AeroCone rain cone with grips (NO DAVIS LOGO) Base with tipping mechanism Bird spikes Debris screen that locks in place 40 ft (12 m) cable Mounting hardware

Read more less

15" Great HawkFor boats from 8m to 20mThe Great Hawk is designed for Cruising and Racing yachts up to 20m. The Great Hawk vane arm is made from the same super tough nylon and the Reference Arms are made from glassed filled nylon for ultimate rigidity and UV protection. The precision balanced vane arm and Hawks "V" Jewel bearing surface gives instant response to shifts and gusts with minimal inertia. The Reference Arms may be preset at 55, 60 or 65 degrees or any angle you prefer and can be used for either upwind or downwind angles. The 5mm Aluminum support rod is strong enough to take normal wear and tear, but can be bent straight should it be knocked while the mast is being stepped or unstopped. The Great Hawk is easily removed from its mounting bracket with one screw and the mast bracket can be mounted vertically or horizontally. Specifications: Vane Arm length 38cm (15")  Overall height 29cm (11.4")  Overall weight 70 grams. Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 3"H x 5"W x 16"L WT: 0.5 lbs UPC: 652773100106

Read more less

Hawk Wind Indicator for Boats up to 8M - 10"The Hawk is the original Hawk Wind Indicator and sets the standard by which all Wind Indicators are judged. Lightweight with a balanced vane arm and the Hawk "V" jewel bearing surface this is the ultimate in Wind Indicator technology. The Vane arm is made from tough Nylon giving good rigidity and UV Protection. The support rod is high grade aluminum allowing it to be bent if required or straightened should it be knocked or damaged. The easily removable mast clip can be mounted either vertically or horizontally and is easily removed without tools. Adjust and lock the reference arms at any angle for quick, at a glance indication or either gybing or tacking angles.Specifications: Vane Arm Length 27cm (10.6") Overall Height 28cm (11") Overall Weight 25 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 4"W x 13"L WT: 0.1 lbs UPC: 652773100205

Read more less

Wireless Repeater with Solar PowerFor longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000' (300M) outdoors, line of sight; typical range through walls under most conditions is 200' to 400' (60 to 120M). Includes solar panel, regulator circuit, and rechargeable battery.Use up to eight repeaters with a single wireless station, or form a network of weather stations by linking eight repeaters to eight different wireless stations.Compatible with Vantage Pro2 and Vantage Vue only; not compatible with original Vantage Pro. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Temperature/Humidity Sensor w/Radiation ShieldFeatures both temperature and humidity sensors inside the radiation shield, which protects the sensors from solar radiation and other sources ofradiated and reflected heat. Includes hardware for mounting on a fence post or pole and 25' (7,6M) cable. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

UV SensorMeasures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose.Multi-layer filter provides a spectral response that closely matches the Erythema Action Spectrum. Diffuser provides excellent cosine response. Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust. Includes built-in level and 2' (0.6M) cable.Compatible with both original Vantage Pro and Vantage Pro2. (Already included with Vantage Pro Plus and Vantage Pro2 Plus.)You may also need a Solar Sensor (#6450) and Sensor Mounting Shelf (#6673). Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Complete Wireless Soil Moisture/Temperature StationProduct DescriptionSolar-powered station includes transmitter and battery inside weather-resistant shelter, 4 soil moisture sensors and 4 temperature probes. To view the data, add a wireless Vantage Pro2 console/receiver, Weather Envoy, or WeatherLink. Add up to 2 leaf wetness sensors (sold separately), to create a custom station.See also the Wireless Leaf Moisture/Temperature Station (#6345) which does not include sensors.Not compatible with original Vantage Pro stations.This station meets the GLOBE protocol requirements. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Sensor Mounting ShelfFor mounting solar radiation sensor and/or UV sensor on Vantage Pro and Vantage Pro2 integrated sensor suite. Rigid shelf with anodized aluminum posts and stainless steel hardware attaches easily next to the rain collector on the outside of the integrated sensor suite.Compatible with both original Vantage Pro and Vantage Pro2.

Read more less