Paddlesports - Accessories

36" SAE Power Cable Polarized Electrical ConnectorThis SAE-type polarized electrical connector is a two-prong plug and socket connector set. Features:14-gauge duplex wireSpecifications: Length: 36 in. Volts: 12-24 Max Amps: 20A @ 12V Wire Gauge: 14 AWM Weight: 0.17 lb. Specifications: Type: Cables Box Dimensions: 1"H x 5"W x 9"L WT: 0.15 lbs UPC: 035514432757 Brochure (pdf)

Read more less

Paddle Keeper KitAdd or replace paddle holders with the YakGear Paddle Keeper Kit. While there are many ways to mount and store paddles on kayaks and canoes, bungee paddle keepers are by far the most versatile. A 1/4-inch bungee is mounted with terminal ends and a J-hook to form a pressure-based bungee clamp for paddles, fishing poles, and anchor sticks. This kit comes with two paddle keepers, so the versatility and practicality of the product will not be limited to one side of the kayak or canoe.As always, this complete kit comes with all stainless-steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.Features: Paddle keepers can be used to store an assortment of items Made of 1/4-in. nylon bungee, it attaches to a vessel using terminal ends and sleeves Each kit comes with two paddle keepers Installation instructions and hardware are included 1-year warranty

Read more less

Kayak Hoist SystemAttwood's Kayak Lift Hoist is designed for the storage of kayaks, canoes, bikes, ladders and so much more. The pulley systems are constructed to allow one person can hoist any kayak, while the hook and locking mechanisms are able to safely hold up to 120 lbs. Features on this kayak storage hoist include an easy lifting pulley system and 2-inch wide webbing hand straps. All hardware needed for mounting this kayak hoist is included with your purchase. Place the Black Attwood Kayak Lift Hoist in your garage or storage shed, and you are set to keep your kayak up and off the ground all winter. Features: Safety holds up to 120 lbs Easy lifting pulley system 2" wide webbing straps Color: Black Includes:All mounting hardware

Read more less

Rudder Cable Tubing KitThis kit includes (2) 15' sections of 3/16" rudder cable tubing and (10) 3/16" UL cable clamps.Features:Proudly constructed in the USA of nylonSpecifications: Tubing Size: 3/16 in. Length: 15 ft. Inner Diameter: 5/32 in. Color: Black Weight: 0.20 lb. Specifications: Type: Cables Box Dimensions: 2"H x 8"W x 9"L WT: 0.25 lbs UPC: 035514748131 Brochure (pdf)

Read more less

Rudder Cable KitThis kit includes (2) 15' sections of 1/16" rudder cable, (4) thimbles, and (4) swedges.Features:Constructed of 304 stainless steelSpecifications: Cable Size: 1/16 in. Length: 15 ft. Color: Steel Weight: 0.25 lb. Specifications: Type: Cables Box Dimensions: 1"H x 8"W x 9"L WT: 0.3 lbs UPC: 035514748124 Brochure (pdf)

Read more less

Pull-Up Strap Handle KitWhether users are looking to fish from a standing position on a sit-on-top kayak or just need a little assistance getting out of the boat, the Pull-Up Strap Handle Kit can be easily installed on any kayak. Kit Includes:  Webbing with grab loop - 74” X 1” (1) 1” webbing slide (1) Stainless steel eye strap (1) 10-32 X 3/4” OH machine screws (2) 10-32 Nyloc nuts (2) #10 fender washers (2) Features:Constructed of nylon with stainless steel hardwareSpecifications: Fasteners Included: Yes Weight: 0.75 lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pumps/Drives Box Dimensions: 2"H x 5"W x 7"L WT: 0.3 lbs UPC: 035514736053 Quick Guide (pdf)

Read more less

Drain Plug KitThis drain plug was designed with a molded-in recess in the base to trap sealant, which provides a watertight seal. For transom installations, baitwells, ice chests, tanks, etc.Kit Includes: Drain plug and base (1) Foam gasket (1) 10-32 X 1” OH machine screws (2) 10-32 Nyloc nuts (2) #10 flat washers (2) #10 well nuts (2) Features:Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware.Specifications: Distance Between Mounting Holes: 1-1/2 in. Fasteners Included: Yes Weight: 0.08 lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

448 Stick-On Mount w/Gear-Head Adapter - 3" PadWith 3MT VHBT Tape. Use with all Scotty post mount accessories. Pair with all Scotty post mount accessories. Position your rod holder or Scotty accessory virtually anywhere on your SUP or flush kayak/boat surface. The attached Gear-Head mount allows you to quickly change rod holder positions with a simple twist. A non- permanent solution for mounting Scotty products to your watercraft and getting you out there!WARNING: This product can expose you to chemicals including Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

 Performance Paddle ClipThis one-piece Performance Paddle Clip allows for simple, one-handed storage of a paddle. Features an anti-snag ramp to prevent lines from getting stuck under the clip when not in use and leash attachment points for securing a paddle leash.Kit Includes: Paddle clip (1) 10-32 X 1” PH machine screws (2) 10-32 Nyloc nuts (2) #10 flat washers (2)  #10 well nuts (2) Features: Proudly constructed in the USA of UV-resistant injection molded nylon with stainless steel hardware Able to store a paddle with a diameter of 1-1/8 inches Specifications: Fastener: 1/4 in. PH Weight: 0.18 lbs WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Gear Head Mount Kit #388Scotty's Gear Head Mount Kit comes with the #428 Gear Head Mount, #280 Baitcaster Rod Holder, #459 Adjustable Rod Holder Extender, and #312 Mounting Post.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Nylon Deck Plate Bag - 8" x 12" - RedThis Sea-Dog Deck Plate Bag is great for keeping valuables dry while paddling. Features: Fits all Sea-Dog® Deck Plates with Internal Collar High visibility red color Specifications: Diameter: 8 in. Length: 12 in. Weight: 0.18 lb. Specifications: Type: Bags Box Dimensions: 2"H x 9"W x 9"L WT: 0.25 lbs UPC: 035514338561

Read more less

Nylon Deck Plate Bag - 6" x 10" - RedThis Sea-Dog Deck Plate Bag is great for keeping valuables dry while paddling. Features: Fits all Sea-Dog® Deck Plates with Internal Collar High visibility red color Specifications: Diameter: 6 in. Length: 10 in. Weight: 0.16 lb. Specifications: Type: Bags Box Dimensions: 1"H x 7"W x 7"L WT: 0.15 lbs UPC: 035514338554 Brochure (pdf)

Read more less