Paddlesports - Rod Holders

Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 30 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003772

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 30 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.5 lbs UPC: 835719003710

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 15 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 835719003758 Brochure (pdf)

Read more less

EVO-360 Flush Mount Rotating Rod Holder with 8.5" Tube at 0 DegreesThe EVO-360 rotating rod holders are more of a revolution than an evolution.They completely revolutionize the conventional flush mount rod holder that binds you to a fixed rod time while fishing.These are the 30-degree, 15-degree and 0-degree models, with 8½” tube lengths, the rotating rod holders are a mirror polished full stainless rod holder rated to 135lb tackle they cover most general fishing needs for a regular straight stock rod and curve butt rod to allow the fine-tuning of a position for trolling under outriggers or live bait and bottom fishing or even kite fishing. Features: Rotating Rod Holder Drain Attachments - Specially designed by Exploding Fish to complement the rotation of the tube and not twist. 0-degree drain attachment - Rotating rod holder 0-degree Drain Attachment 15-degree and 30-degree drain attachment - Rotating rod holder 30-degree Drain Attachment Drain attachments for 0-degree, 15-degree, and 30-degree rotating rod holders are made of 316 stainless steel and a brass swiveling pipe clamp. Universal Backing Plate - This is the 316 stainless backing plate for the rotating and fixed rod holders for added strength under the gunwale. 5-year manufacturer's warranty Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3.75 lbs UPC: 835719003734 Brochure (pdf)

Read more less

EVO-FX Fixed Rod Holder with 8.5" at 0 DegreesCrafted with the highest quality materials to ensure a secure and reliable fishing experience. Its sturdy design and easy installation make it the top choice for professional anglers. Upgrade your fishing gear and trust in its durability and stability for a successful fishing trip.Features: Rod Sleeve: Rolled and polished, seamless 316 stainless steel. Bearings: Injection molded ultra-high molecular weight polyethylene for ultra-high wear, chemical, compression, and shear resistance. Base Plate: Precision cast, stamped, machined, and polished 316 stainless steel. Top Cover: Precision cast, machined, and polished 316 stainless steel. Isolation Gasket: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. Locking lever: Precision cast, machined, and polished 316 stainless steel. Locking lever cover: Resilient rubber blend, designed specifically to be very tough and wear-resistant, and to resist attack from chemicals and UV. M x 7.5mm 316 stainless steel Phillips drive, countersunk screw, nut, and washer. Sleeve Guide: Resilient rubber blend, designed specifically to be very tough and wear-resistant. Specifications: Flange (W x L): 116mm x 143mm Overall Length: 212mm Shaft Length: 197mm Shaft O.D.: 51mm Mount Type: M6 Sleeve Swing Ø : 0° – 0mm | 15° – 157mm | 30° – 253mm Rated to 60kg/135lbs Tackle What's In The Box? 1x 316L Stainless Steel Rotating Rod Holder 3x Full Fastener set 1x Isolation Gasket 1x Installation Guide 1x Installation Swing Template 1x Care & Maintanence book Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2 Finish: Polished Length (Inches): 8.3 Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 3 lbs UPC: 835719003673

Read more less

Baitcaster Rod HolderTrack Combo w/Gearhead & 4" TrackIncludes:280 Baitcaster / Spinning Rod Holder438 Gear-Head 440-4 Low Profile TrackThe Baitcaster / Spinning Rod holder is a versatile rod holder for any angler. The baitcaster reel sits in a cushioned cradle while a front slot allows for a spinning reel. The open bottom allows for the rod holder to accommodate trigger grips as well. Rods can be secured with a soft latching strap which snaps over the top for baitcaster or under the bottom for spinning reels. The 438 Gear-Head Track Adapter quickly slides into place and locks down Scotty rod holders and accessories, this allows you to quickly change rod holder positions with a simple twist. The Scotty 440-4 Low Profile Track is made from high strength composite material. The track can be quickly and easily installed on a kayak, canoe or any other watercraft.Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Brochure (pdf)

Read more less

Coaming/Gunnel Clamp MountPosition your rod holder or Scotty accessory virtually anywhere on the lip of your kayak's coaming. Built tough from rugged engineering grade nylon, the 433 revolutionizes the way your can fish from your sit-in kayak. The attached Gear-Head Mount allows you to quickly change rod holder positions with a simple twist. Easily fasten the 433, drop and lock your favorite Scotty Rod Holder or accessory and start fishing! A non-permanent solution for mounting fishing gear to your watercraft and getting you out there! Specifications: Finish: Black Construction: Nylon Box Dimensions: 3"H x 5"W x 9"L WT: 0.8 lbs UPC: 062017004334

Read more less

Baitcaster/Spinning Rod Holder without Mount Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top.*Comes with no mount, enabling you to choose whichever mount suits your needs separately.

Read more less

Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin Comes with no mount, enabling you to choose whichever mount suits your needs seperately.

Read more less

Power LockScotty's most popular value-priced, positive-locking, open style rod holder. Fiber reinforced engineering nylon, offers strength, resilience and reliability.No. 230Includes No. 241 combination deck or side mount Specifications: Construction: Plastic Box Dimensions: 3"H x 7"W x 11"L WT: 1.35 lbs UPC: 062017002309

Read more less

Bait Caster / Spinning Rod HolderHolds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.Includes No. 241 combination deck or side mount. WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less