Sailing - Hardware

Front Mounted Cleat Fairlead - Small - BlackEasily fitted to the small 'T-Cleat' and 'C-Cleat'. Allows precise cleating and release from any lead angle. Lower entry efforts for off-centre cleating. Will not catch lines or clothing.MaterialTough, abrasion resistant composite material. Specifications: Color: Black Box Dimensions: 1"H x 2"W x 3"L WT: 0.05 lbs UPC: 9316800450886

Read more less

C-Cleat Cam Cleat - Large - Grey w/Grey Base6-16mm(1/4" - 5/8") Rope DiameterIntensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications:Range of cleats for all requirements including control lines, jib sheet and mainsheet cleatingMaterials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring Specifications: Color: Grey Box Dimensions: 2"H x 3"W x 6"L WT: 0.3 lbs UPC: 9316800207725

Read more less

SkyLock 400The Barton SkyLock is an integral part of the SkyDock lifting system. The clever design and positioning of the locking cams mean the control line will never slip even when accidentally released.Manufactured in our factory using 316 stainless steel side plates, glass-reinforced nylon cover plates, and aluminum cam plates to ensure a long service life with minimal maintenance.Can be used to lift dinghy outboards, provisions, and equipment on board, especially useful when short-handed. Around the home, SkyLock can be used for hoisting individual items such as bicycles and toys into unused roof space.Specifications: Maximum lifting load up to 400kg (880lbs) Line Diameter: 5mm Length: 110mm Height: 28mm Width: 90mm Weight: 181 grams

Read more less

Shock - 3/16" Line - 1/4" Webbing - Red - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but is strong enough to cope with poor leads.Soft attachment specialistsSHOCKS are designed primarily for 'soft attachment'; spliced to a line end or lashed in place. The elongated attachment aperture is also ideal for webbing attachment, ensuring the intended orientation is maintained.Virtually limitless applicationsThe applications for SHOCKS are virtually limitless, including numerous high performance dinghy and small sailboat rigging applications including tweakers, vangs, trapezes, cunninghams, barber haulers and kite bridles. They are also handy on larger boats for uses such as lazy jacks, sail covers, tie-downs, ladder and motor hoists.Hidden performanceAt a mere 2.5g (0.1 oz), SHOCKS are outstanding performers in the strength and weight stakes. The clever design and exacting finishing also provide excellent free running at moderate changes of angle. Small & hi-tech line specialists SHOCKS accept lines from 1.4mm (1/16") up to 8mm (5/16") and function just as well with hi-tech uncovered braids as with traditional double braids.Features: Performance & versatility Ultra lightweight Ultra compact Durable Color coded Impact resistant Small line optimised High load capacity Poor alignment tolerant Soft attachment compatible Grit & salt resistant Applications:Unlimited uses, including kitesurfing, paragliders, sports kites, power kites, stunt kites, depower kites, traction kites, for deflection or purchase system on control linesMaterials:Anodized AluminumSpecifications:Rope Ø:1.4mm-5mm(1/16" - 3/16")Height:8.5mm(5/16")Width: 14.9mm(9/16")Length:22.9mm(7/8")M.W.L.:175kg(385lbs)B. L.:350kg(770lbs)Weight:2.5g(0.01oz) Specifications: Color: Red Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 9316800502523 Brochure (pdf)

Read more less

Mast Base Organizer - 4 BlockThe Barton Mast Base Organiser is finished in our unique 'Spectro' grey anodizing for a long-lasting finish.It accepts up to four double tang blocks mounted on individual stainless steel swivel posts but with three deck fixing points.The unit is fitted close to the mast base to accept halyards, reefing lines, and a topping lift. It is designed to work with our range of deck organizers, rope clutches, and winches, doing away with the need to leave the cockpit when reefing, hoisting, or lowering the mainsail.Specifications & Dimensions: Length: 160mm Width: 25mm Height: 28mm Weight: 166g Safe Working Load: 1,540kg Break Load: 3,080g Fixing Hole: 6mm Specification comprises: 'Spectro' anodized aluminum base Four stainless steel swivel posts with nylon base washers Four pairs of nylon packing washers for tang blocks Used in conjunction with series 1-4 01 090 to 04 090 single blocks

Read more less

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" & 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw and attached line to relieve tension from your windlass while anchored by snubbing the chain overboard and tying off the line to a cleat or samson post on deck Use the snubber on deck for security to hold the chain in your anchor roller and tie off on a cleat while underway for peace of mind Relieve the tension on the windlass (like in 1) by attaching the snubber to the chain in the anchor roller and pulling back and tying it off securely All T-316 stainless. Version with 3-strand nylon line includes professional eye splice.Note: Always keep the bitter end of the anchor chain secure in the windlass while using the chain snubber.

Read more less

FRX10 Friction Ring - 10mm (25/64")Features: Efficient and light FRX Wichard thimbles are efficient, light, and reliable Very strong and can be used for heavy loads and semi-static lines FRX thimbles are designed to make your lines run smoothly with minimum wear They are hard anodized (50 microns) for a longer lifespan Applications:Mast-foot block, barber-hauler, inhauler, loop, thimble, lazy jack, running backstay, tackle, and moreSpecifications: Materials: Anodized aluminium Working load: (lb) 1760 / (kg) 800 Weight: (lb) 0.011/ (g) 5 A: (inch) 5/16" / (mm) 8 B: (inch) 25/64" / (mm) 10 C: (inch) 15/32" / (mm) 12 D diameter: (inch) 63/64" / (mm) 25 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 *Sold as an Individual Quick Guide (pdf)

Read more less

FRX20 Friction Ring - 20mm (25/32")Features: Efficient and light FRX Wichard thimbles are efficient, light, and reliable Very strong and can be used for heavy loads and semi-static lines FRX thimbles are designed to make your lines run smoothly with minimum wear They are hard anodized (50 microns) for a longer lifespan Applications:Mast-foot block, barber-hauler, inhauler, loop, thimble, lazy jack, running backstay, tackle, and moreSpecifications: Materials: Anodized aluminium Working load: (lb) 7050 / (kg) 3200 Weight: (lb) 0.068 / (g) 31 A: (inch) 35/64" / (mm) 14 B: (inch) 25/32" / (mm) 20 C: (inch) 53/64" / (mm) 21 D diameter: (inch) 1 27/32" / (mm) 47 Caption: Working Load (WL): For nautical applications Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5 Quick Guide (pdf)

Read more less

DO 550 Rope Clutch - Spring Assembly   Replacement spring assembly for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Silver Box Dimensions: 1"H x 4"W x 6"L WT: 0.01 lbs UPC: 5035088815494 Brochure (pdf)

Read more less

DO 550 Rope Clutch - Handle Replacement handle for any size Barton Marine DO 550 Rope Clutch.*Sold as an Individual Specifications: Color: Black Box Dimensions: 2"H x 3"W x 6"L WT: 0.1 lbs UPC: 5035088815456 Brochure (pdf)

Read more less

Symmetric Carbine Hook Without Eye - Length 100mm - 13/32"Features: Grade 316L stainless steel carbine hooks Symmetrical shape without eye                                           Applications:For fastening applicationsSpecifications: Materials 316L stainless steel grade Length (inch) 3-15/16" Working load (lb) 2640 WLL (lb) 1100 Breaking load (lb) 5510 Weight (lb) 0.273 Dimensions (see 2nd image): A (inch) 19/32" B (inch) 35/64" D diameter (inch) 25/64"

Read more less

Quick Cleat - Stainless Steel - 3/8"The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots.  The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger yachts and ships, workboats, catamarans, and fishing boats to hold marine and boat gear securely on lines up to 5/16" (10 mm.)The Barton Marine Quick Cleat offers exceptional value and takes the stress out of tying knots.Quick Cleats are easy to use.  Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope.  Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other. Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds.Features: Easy to use Quality engineered and manufactured Technical Specifications: Material - Marine-grade 316 Stainless Steel Working Load -1,188 lb (540 kg) Maximum Rope Diameter - 5/16" (10 mm) Height - 1" (2.4 cm) Weight - 9.9 oz (280 g) *Sold as an Individual  Brochure (pdf)

Read more less