Sailing - Rigging

Splice Line Gate Kit - Midship for One SideC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended.These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits. Specifications: 1 x LS-3100 Over Center Gate Hook w/ Splice Eye 1 x LS-3200 Splice Eye to Splice Eye Fitting 1 x LS-3300 Gate Eye to Splice Eye Fitting 1 x LS-3400 Adjuster w/ Splice Eye 6' Dyneema

Read more less

Open Body Jaw to Swage Turnbuckle for 1/8" WireClassic, traditional design. Forged silicon bronze body with T-316 stainless ends.Specifications: 1/8" Wire 1/4" Pin 3" adj.

Read more less

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications: 1/8" Wire 1/4" Pin 1" adj.

Read more less

Add-A-CleatA versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Construction consists of a husky Stainless Steel bracket and clamp with a 4-1/2" nylon coated aluminum cleat. Use them for fenders and flag halyards. Installation is easily made with a screwdriver. 

Read more less

Lever Arm Crimper ToolC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life. This specific tool is built to handle the stress of crimping stainless fittings. "Nicropress" tools were designed to crimp soft copper and aluminum oval and stop sleeves only. Specifications: Two cavities for 1/8" and 3/16" hand crimp fittings Good production tool for the dealer

Read more less

Jaw/Jaw Tubular Turnbuckle T-Style 3/8-24 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment.Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. Specifications: Jaw with "T" Toggle Construction Machine swage Bronze body/ 316 stainless ends Wire size: 1/4" Breaking strength: 7,000 pounds Safe working load: 2,800 pounds Thread size: 3/8-24 Pin to pin length: 9-1/2" (closed) 13-3/4" (open) Body length: 5-5/8" Pin diameter: 3/8"  Weight: 14 ounces

Read more less

Alu Foam Soft Grip Tiller Extension - 800mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Read more less

Carbon Fiber Tiller Extension - 1MFeatures the latest in uni-directional 16mm carbon fiber tube which incorporates an additional pull wound spiral layer for optimum strength, making it stronger than conventional carbon fiber tube, and with our custom-designed foam grip handle to reduce fatigue during long periods of use. *Includes tiller clip. Quick Guide (pdf)

Read more less

Stanchion BullseyeBarton's Stanchion Mount Bullseye is ideal for use with furling lines in place of a block. The simple-to-fit mount features a large nylon bullseye with a 17 mm opening.

Read more less

Alu Foam Soft Grip Tiller Extension - 900mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Read more less

Alu Foam Soft Grip Tiller Extension - 700mmThe aluminum Soft Grip Tiller Extension is a specially designed textured grip for secure handling and comfort during prolonged use.Features: Manufactured from anodized aluminum Soft butt-end option Quick Guide (pdf)

Read more less

High Load Eye 22mm BoreErgonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.Wear ResistanceThe hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.Features: High load eye compared to a standard plain bearing block on average across the range Friction increased by only 15% Strength increased by 272% Weight reduced by 51% Data based on using 4mm D12 SK75 Dyneema core Available in six sizes. Manufactured in marine grade aluminium with a hard anodised finish. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm. Quick Guide (pdf)

Read more less