Sailing

Narrow Slotted Pin Shackle - 3/16" Pin - 13/32"L x 5/16"WFeatures: Slotted shackle pins are low profile to prevent snagging on ropes etc... Grade 316 Stainless Steel bodies and pins

Read more less

Sticky Race Gloves - 3-Finger - Black - XSFeatures: Synthetic leather for maximum durability, minimum stretch and shrinkage Double aramid stitched in high wear areas Double thickness palm and fingers for protection and grip Hook-and-loop wrist closure/adjustment Low cut wrist band for free movement and ClearStart™ watch visibility and operation Mesh panels for flexibility and comfort Mesh panels for flexibility, comfort and quick drying - now available in Grey Sticky gloves reduce fatigue by minimising the physical effort required to hold rope Applications:Used for hand protection and gripMaterials: 'Amara’ synthetic leather Double Aramid stitching Brochure (pdf)

Read more less

12 ST FS Self-Tailing Manual Single Speed Winch - Full StainlessPower Rib™ANDERSEN Winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What’s more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.Power RatioPower Ratio is the mechanical advantage of the winch and is calculated as follows:length of handle x gear ratio           radius of drumThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows: pull of handle (kg x Power Ratio = pull of winch (kg).This means that by applying a load of 10kg, using a 10" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.Specifications: Drum Ø D: 2-3/4" Base Ø B: 4-1/2" Height H: 5" Line Entry L: 1-3/4" Line Size: 5/16-9/16" Weight: 5.7lb Gear ratio 1st speed: 1.3 : 1 Power ratio 1st speed: 9.5 :1 Quick Guide (pdf)

Read more less

Series 40 All Purpose Block - Double Block - Full Swivel HeadAll purpose (AP) blocks are a great all around solution. Self-lubricating Acetal polymer sheaves running on polished stainless steel races perform equally well with dynamic loads and high static loads. For durability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing. Head swivels freely.Features: Exceptionally high working loads Low maintenance, long service life Self-lubricating sheave Slotted pin shackle eliminates fouled lines Two way head post Applications: Mainsheet Halyard Vang Spinnaker control lines on off-the-beach catamarans, one design classes and sportsboats up to 8M(26') Materials: U.V. stabilized Acetal sheaves Impact and U.V. resistant, fiber reinforced Nylon cheeks Grade 316 stainless steel bearing race Grade 316 stainless steel load strap and head fitting Specifications: Sheave Ø: 40mm(1-9/16") Max. Rope Ø: 10mm(7/16") Pin Ø: 5mm(3/16") M.W.L.: 600kg(1,320lbs) B. L.: 1,200kg(2,650lbs) Weight: 135g(4.8oz)

Read more less

Battlestick Round Tiller AdapterSuits 25-32mm(1 - 1-1/4") diameter tillerU.V. stabilized Nylon Specifications: Type: Tiller Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 9316800226450

Read more less

D-SPLICER Kit w/4 Needles & 2mm-4mm(1/16"-5/32") LineD-SPLICER is a range of specialised rope splicing needles for sailors and riggers.They are specifically designed for use with modern synthetic fibres and ropeconstructions, in particular small line sizes where conventional fids/needles don't work.Features: "Pull-through" operation Unique double needle clamps the line making it easy to pull through Ideal for making "soft shackles" Ideal for pulling cover plaits into the core for making tapered sheets Sizes available for lines from 2mm (1/16") diam. to 8mm (5/16") diameter Kit Includes: Machined alloy handle, with anchoring loop 4 interchangeable needles (2 sizes) Storage tube WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Wide Dee Shackle - 1/4" Pin - 1-17/32"L x 1-7/32"WFeatures: 1/4" pin diameter High strength to weight ratio

Read more less

Boom Hanger - 80mm(3-1/8") Internal Width125mm(5") long x 80mm(3-1/8") wideMaterial Diameter: 7.9mm(5/16"). Fixing Holes Diameter: 2 x 8.1mm(5/16")Applications:Typically used on dinghies, catamarans and small keelboatsMaterials:Grade 316 stainless steel Specifications: Color: Stainless Box Dimensions: 1"H x 4"W x 5"L WT: 0.3 lbs UPC: 9316800104260

Read more less

Series 40 Ratchet Orbit Block™ - Single - Auto - Swivel Shackle HeadAutomatic RatchetWith automatic models, the ratchet mechanism engages when load is applied, but switches off when it's released. This lets the sheet run out smoothly and freely-great for rapid easing of the sheet and for gybing asymmetric spinnakers.Awesome Ratchet Block Holding PowerQuite simply, Ronstan Ratchet Orbit Blocks™ have the highest holding power available. The sophisticated NC-machined sheave features Generation 2 of our sheave cross-hole geometry. The Series 40 delivers up to 14:1 holding power, almost double that of our nearest competititor.The unique sheave design has 8 gripping faces which directly resist loaded line movement. Traditional designs have an angled resistance to line movement. Our Generation 2 design has straight resistance faces which both distribute the load and minimise rope wear. These faces are offset from the radial line, to draw the rope down into the gripping area when under load.Simple and Secure AttachmentThe Dyneema® Link is easily fitted and is retained securely by a moulded retainer clip. The flexible link can be left with one end attached to the block when fitting - no more lost shackle pins.The system is compatible with Dyneema®/Spectra® strops, webbing and carbon connection points - much more so than steel loop tops or shackles.Smooth Easing of SheetsWith auto models the sheet runs out smoothly and freely as soon as the ratchet mechanism disengages. Low Profile Stand-Up Kit Allows 0™ or 90™ AlignmentStand-up kits feature a clatter-free rubber boot. You can attach the Dyneema® link so that the block is aligned with the stand-up base or across it. It's a neat low-profile solution which allows full articulation.Features: Up to 14:1 holding power - highest available! Smooth easing of sheets Fully Automatic load sensing ratchet engagemen Swivel shackle head for unlmited block rotation Stainless steel shackle head for ultimate durability and compatibility with harsh fixing points Applications: Dinghy mainsheet systems Mainsheet fine tune systems on sportsboats & small keel boats Mainsheet systems on sportsboats using RF7 mainsheet swivel cleat unit Spinnaker and job sheets on dinghies - especially modern asymmetric classes Control line applications on larger yachts Materials: Sheave: Hard anodised Aluminium Ball Bearings: High compression strength carbon black Acetal Frame/Cheeks: Toughened, glass fiber reinforced Nylon Rope Link: UV stabilized, multi-strand impregnated SK75 Dyneema® Specifications:Sheave Ø:t40mm(1-9/16")Max. Rope Ø: 9mm(5/16")M.W.L.:t175kg(385lbs)B. L.:t500kg(1,100lbs)Weight:t44g(1.5oz)

Read more less

Series 20 Ball Bearing Block - SingleFeatures: Low friction High static and dynamic load capacity Lightweight Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction Applications: Dinghy control lines Dinghy Vangs Cunninghams Traveller controls Materials: U.V. Stabilized Acetal sheaves Stainless steel ball bearings Grade 316 stainless steel load strap and head fitting Impact and UV resistant, fiber reinforced Nylon cheeks Specifications:Sheave Ø:t20mm(3/4")Max. Rope Ø:t6mm(1/4")Pin Ø: 3mm(1/8")M.W.L.:t250kg(550lbs)B. L.:t550kg(1,210lbs)Weight:t20g(0.7oz)

Read more less

Tiller Extension End KnobSuits 16mm (5/8") Diameter Tube Tiller Extensions Specifications: Type: Tiller Box Dimensions: 2"H x 2"W x 5"L WT: 0.1 lbs UPC: 9316800539253

Read more less

Waxed Whipping Twine - 0.8mm x 40M - BlueExcellent for whipping line ends, this twine is pre-waxed with a round construction and will not open because of the flat, strong seam. The special wax formula makes this whipping twine particularly easy to use with the high quality of the twisted PES (polyester) twine.Technical Specifications: Color - Blue Material - Polyester (PES) Thickness -  .03" (.8mm) Length -  131' (40 M) *Sold as an Individual Brochure (pdf)

Read more less