Trailering - Bearings/Hubs/Brakes

Actuator 8.5K - 2" BallSpecifications: 8,500 lbs Capacity Fits 2″ Hitch Ball For Use with Disc Brakes

Read more less

10″ Knott Disc Brake KitLoad Rite's 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles.Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper assembly with pads Full inner and outer bearings, races, and corresponding seal Dust cap, lug nuts, and mounting hardware *LH/RH Compatible*Quantity (2) Kits Required Per Axle Assembly

Read more less

Rotor Complete Kit Vented 9.75" Integral, No Grease 5 Stud Dacromet Finish KnottComplete 9.75″ Disc Brake Rotor Assembly Manufactured by Autoflex Knott.Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5″ Bolt Pattern. Inorganic, Dacromet®, VOC Compliant, Water-Based, Coating Provides “4-Way Corrosion Protection” Against Weathering/Harsh Conditions.Features: Compliant to 1.06″ × 1.38″ Tapered Spindles 3,500 lbs Capacity, Disc Braking Axles Weight: 25 lbs Kit Includes: Full, 1,750 lbs. Capacity, Disc Braking Rotor with Dacromet® Finish Bearings, Pre-Installed Races, and Rear Grease Seal Autoflex Knottâ’¸ Brand Dust Cap and Grommet 12 Position Castle Nut, Spindle Washer, and Cotter Pin

Read more less

Trailer Hub KitHub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-3/8" - 1-1/16" Bolt Cir: 5 x 4.5 Cap: 1750 Flange O.D.: 6-1/2" Max Wheel: 15" Hub I.D.: 1.98" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

6.6K Disc Brake Actuator - Tie Down Engineering - Fits 2" Hitch Ball6,600 lbs Capacity, Tie Down Engineering Disc Braking, Surge ActuatorSpecifications: 6,600 lbs Capacity Fits 2″ Hitch Ball For Use with Disc Brakes

Read more less

Trailer Hub Kit - 1-3/8" x 1-1/16" Tapered - 5 x 4-1/2" GalvanizedFeatures: 1-3/8" x 1-1/16" Tapered 5 x 4-1/2" Galvanized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

3/4" Wheel Bearing KitIt may not be an immediate thought, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal pressure and not damage the seals. This kit fits a 3/4" diameter.Features: Features a 3/4 in. inside diameter Automatically maintains the correct internal pressure to avoid seal damage Includes:Two bearing cones, two bearing cups, a grease seal, and a cotter pinSpecifications: Finish: Brushed Stainless Hub Warehouse: D25 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

Grease Seals f/1" to 1-1/16" Straight SpindleProduct DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and provide a tight long lasting seal.Features: Seal number: 12192TB For 1" or 1-1/16" straight spindles Seal land outer diameter: 1.250" Hub inner diameter: 1.979" Pack of 2 grease seals WARNING: This product can expose you to chemicals including CADMIUM which is known to the State of California to cause cancer or other reproductive harm, and di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

8,500lb Disc Brake Actuator – Tie Down Engineering ModelThe Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes. The built-in dampening shock absorber retards the telescoping shock against the hitch ball. Be sure to comply with the regulations for brakes in your state. Brake laws are sometimes minimum standards, and users may wish to add additional brakes to a trailer.Read the tow vehicle owner’s manual on towing capacity and other towing recommendations before installing brakes or this actuator. The Model 850E Actuator is completely assembled and ready to bolt into place if not all ready-installed. Manufactured for tongue sizes: 3”x 3”, 3”x 4” & 3”x 5”.Features: 8,500 lbs. capacity Fits 2″ in. hitch ball For use with disc brakes Maximum Actuator Capacity: Gross Load: 8,500 lbs. Maximum Tongue Load: 850 lbs. The actual in-service rating is limited to that of the ball and hitch or the least-rated component on the tow vehicle or trailer being used, or the trailer manufacturer’s G.V.W.R. shown on the certification label, whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as a total gross weight). Quick Guide (pdf)Owner's Manual (pdf)

Read more less

HubMate Wheel Bearing ProtectorsHubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out. Features: Outer hub inner diameter: 1.78 inches Automatically lubricates, reducing wear and prolonging bearing life Covers are custom-fitted PVC

Read more less

CE Smith Dust Caps - Hub ID 1.980" - (Pair)Product DescriptionUse this dust cap to protect your axle nut.Features: Fits hub with inner diamerter of 1.98" Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Hub Kits come complete and ready to install on your axle. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less