Trailering

E-Track Adapter Strap - 7" PairBolt-on CargoBuckle adapters offer added flexibility and mobility for the CargoBuckle Retractable Ratchet Tie-Down where permanent mounting is not desired.

Read more less

Transom Ratchet Tie Down - 2" x 43" - 2-PackFeatures: 833lbs Load Capacity 2,500lbs Break Strength Zinc Strap retracts for easy storage and no tangling Easy bolt on function (Hardware included) Some models available with stainless steel housing Vinyl coated J-hooks protect boats finish Provides super strong holding power Some models available with stainless steel housing WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Feet): 43" Diameter (Inches): 1" Box Dimensions: 4"H x 10"W x 12"L WT: 5.7 lbs UPC: 016118076486

Read more less

FasTen Leveling Blocks XL with T-Handle - 2x2 - Grey *10-PackThe Camco FasTen XL Leveling Blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. The larger size has an increased weight capacity of blocks individually and in a stack, and also provides more surface area for leveling. Each block adds a full inch to stack height. Camco’s FasTen XL Leveling Blocks can be used with single wheels, dual wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles. The convenient carrying handle secures blocks together for storage and easily pulls up for carrying, or pushes down for more compact storage. Individual block measures: 10.5” x 10.5” x 1.5”. Stack height should not exceed 4-1/2 inches.Features: The larger 10.5” x 10.5” design withstands more weight and creates more surface area for leveling 10 interlocking blocks stack to the desired height for customizable leveling Carrying handle easily twists to secure blocks together for storage Strong and durable construction Safe and easy to use

Read more less

2.5" Center Hub - Matte BlackThe centerpiece in the well-designed ROCK TAMERS 2.5" Hub Mudflap System.Features: Replacement hub Fits a 2.5" hitch Bolt Kit RT052 x 2 units may be needed to secure the hub Matte Black with forged aluminum *Sold as an IndividualWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

License Plate BracketUpgrade the appearance of your trailer with an aluminum tread plate license plate bracket. Fits standard left side DOT brake/tail lamps. No mounting hardware required. Installs between existing tail light mounting bracket and the left side tail light via the lamp's two mounting studs. Aluminum tread0.080" thick

Read more less

8,500lb Disc Brake Actuator – Tie Down Engineering ModelThe Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes. The built-in dampening shock absorber retards the telescoping shock against the hitch ball. Be sure to comply with the regulations for brakes in your state. Brake laws are sometimes minimum standards, and users may wish to add additional brakes to a trailer.Read the tow vehicle owner’s manual on towing capacity and other towing recommendations before installing brakes or this actuator. The Model 850E Actuator is completely assembled and ready to bolt into place if not all ready-installed. Manufactured for tongue sizes: 3”x 3”, 3”x 4” & 3”x 5”.Features: 8,500 lbs. capacity Fits 2″ in. hitch ball For use with disc brakes Maximum Actuator Capacity: Gross Load: 8,500 lbs. Maximum Tongue Load: 850 lbs. The actual in-service rating is limited to that of the ball and hitch or the least-rated component on the tow vehicle or trailer being used, or the trailer manufacturer’s G.V.W.R. shown on the certification label, whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as a total gross weight). Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Trailer Tongue Step PadThe Trailer Tongue Step Pad makes accessing your boat easy by providing a stable and steady place to anchor your feet. It can be mounted anywhere that is suitable, such as on trailer tongues or side rails.Features: Fits any 2x3 in. or 3x3 in. rail Mounting hardware is included Measures 24 in. length and 9 in. wide Has a textured surface for slip resistance *Sold individually

Read more less

Motor SupportSupports the cantilevered weight of the motor.Features: Cast aluminum head with high-strength aluminum shaft Stabilizes engine and steering mechanism when trailering Varying adjustability Includes 15″ black EPDM rubber holding strap Bolt-on & over the roller strap-on Warranty: 5 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Extend-A-Reach Motor ToterExtend-A-Reach secures the motor to the trailer crossbar.Features: Includes all parts necessary for easy installation Removes easily for quick loading and unloading Heavy-duty steel with corrosion-resistant e-coat finish Includes 15″ black EPDM rubber holding strap Adjusts from 26″ to 56″ Warranty: 5 years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Trailer Bunk Padding 12" x 12'12 ft. long roll of durable, weather-resistant polypropylene marine carpet material. Easy to cut and custom fit. Features: 12 inches wide Protects hull  Eases loading and launching  Charcoal color Acrylic backing grips the surface of trailer bunk boards or cradle  No excessive fuzz, static-free Made for minimal water retention Quick Guide (pdf)

Read more less

Quick-Release Gunwale Strap 2" x 13'Gunwale straps secure the entire aft section of the boat over the gunwale to the trailer and restrict vertical movement while on the road. Specifications:2 inches wide13 ft. longWebbing:  Strong webbing Resists rot, oils, gasoline, and most chemicals Buckle:  Quick-Release (Over-Center) buckle  Strong and secure, yet easy to use  Quick tightening  Cinch tight and secure by depressing buckle handle  Release by lifting the buckle handle Hook:  J-Hook with snap-closure for secure, easy attachment Electrostatic Discharge Coating (EDC) finish prevents corrosion  Heavy gauge Specifications: Diameter (Inches): 2.00 Length (Feet): 13.0 Box Dimensions: 4"H x 6"W x 9"L WT: 1.15 lbs UPC: 022697152213 Quick Guide (pdf)

Read more less

HubMate Wheel Bearing ProtectorsHubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out. Features: Outer hub inner diameter: 1.78 inches Automatically lubricates, reducing wear and prolonging bearing life Covers are custom-fitted PVC

Read more less