Roller Pontoon Guide-OnIdeal for bunk style pontoon boat trailer with box, channel, or I-beam frames up to 3" wide x 4-1/4" tall. Minimum friction rolling action easily guide pontoon boat onto trailer. Height is 25" above trailer frame. Mount with roller bunks 2-3" from pontoons on a trailer fram cross member. Features:
Fits frames up to 3" wide x 4-1/4" tall
U-bolt mounting brackets
Includes two rubber roller bunks
Galvanized steel construction
Zinc plated hardware
For larger trailer frames check out the Large Frame U-Bolt Kit (11416).WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
5' Roller BunkRoller bunks make loading and unloading small craft at very short or even dry ramps easy. Great for ramps where it is not practical to float the boat onto the trailer. Pre-assembled and pre-drilled for easy installation. May be installed using mounting brackets if lift and/or angle is needed, or may be bolted directly to trailer frame for a flat bottom boat, or even mounted on top of existing bunk boards.Features:
Durable 2" polypropylene rollers on 1/2" shafts mounted in a heavy gauge pre-galvanized channel
Supports up to 1500lbs of well distributed weight
Mounting hardware not included
Sold in pairs
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2'' x 4'' X 24" boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21'' with adjustment out to 13" from frame on each side. Can be mounted on top of frame for extra height. Complete with mounting hardware to fit frames up to 3'' wide x 4-1/4'' high.WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
BoatBuckle® G2 Retractable Gunwale Tie-DownQuantity: 2Dimensions: 2"-38"Break Strength: 2,500 lbs./eaSafe Work Load: 833 lbsThe only one in its class,the BoatBuckle® G2 Gunwale Tie-Down offers the same superior quality as a BoatBuckle® G2 Transom Tie-Down,yet boasts a beefy vinyl-coated double J-hook,designed to fit gunwale rails that measure 2" wide or less.Perfect for aluminum or other narrow gunwale boats. Specifications:
Length (Feet): 38"
Diameter (Inches): 2"
Box Dimensions: 4"H x 10"W x 14"L WT: 5.9 lbs
UPC: 079111142213
Quick Guide (pdf)
2" Hub Mudflap System - Matte Black/StainlessROCK TAMERS™ is the premiere “Adjustable and Removable” Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris.Perfect solution for consumers who want the utility aspect of mudflaps and to maintain their vehicle’s stylish and attractive appearance.*This patented system is easy to attach or remove from any standard 2" ball mountFeatures:
Mudflap height is adjustable to maintain consistent ground clearance when towing various loads
Overall width is adjustable and easily fine-tuned to fit any small, full size, or dually truck
Width expands from 67 1/4" to 96 3/4"
Mudflap measures 24" x 24"
In the Box:
2" Center Hub/Matte Black Finish
M10 Ball Mount Clamp Bolt x 2
M10 Jam Nut x 2
M10 Split Washer and M10 Flat Washer x 2
Hub Arm R (Right) and Hub Arm L (Left) x 1
M6 Arm Clamp Bolt x 6
M6 Nylon Insert Hex Nut x 6
M18 Arm Pivot Bolt/Split Washer/Flat Washer x 2
5MM Allen Wrench x 1
Flap Support Rod x 2
Rod End Cap and Flap End Cap x 2
M5 Flap Retainer and End Cap Bolt x 2
M5 Nylon Insert Hex Nut x 4
Flap Clamp / Matte Black Finish x 2
Mudflap (SS Trim Plate) x 2
M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10
Bolt Hole Punch x 1
Rock Tamers Trim Plate x 2
M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16
Locking STAR PIN™ Wrench x 1
Instruction Manual x 1
*Sold as a KitWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)
Replacement MudflapReplacement mudflap for your existing ROCK TAMERS Mudflap System.Compatibility:
00108 Mudflap System - 2" Hub
00110 Mudflap System - 2.5" Hub
00112 Mudflap System - 3" Hub
Features:
Mudflap can be used for both left and right sides
Mudflap is 3/8" thick, fiber reinforced rubber
Rock Tamers trim plate is sold separately, part RT028
Mudflap measures 24" x 24"
*Sold as an IndividualWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
3" Hub Mudflap System - Matte Black/StainlessROCK TAMERS™ is the premiere “Adjustable and Removable” Mudflap System designed to provide the ultimate protection for your towables from damage caused by rocks and road debris.Perfect solution for consumers who want the utility aspect of mudflaps and to maintain their vehicle’s stylish and attractive appearance.*This patented system is easy to attach or remove from any standard 3" ball mountFeatures:
Mudflap height is adjustable to maintain consistent ground clearance when towing various loads
Overall width is adjustable and easily fine-tuned to fit any small, full size, or dually truck
Width expands from 68 1/4" to 97 3/4"
Mudflap measures 24" x 24"
In the Box:
3" Center Hub/Matte Black Finish
M10 Ball Mount Clamp Bolt x 2
M10 Jam Nut x 2
M10 Split Washer and M10 Flat Washer x 2
Hub Arm R (Right) and Hub Arm L (Left) x 1
M6 Arm Clamp Bolt x 6
M6 Nylon Insert Hex Nut x 6
M18 Arm Pivot Bolt/Split Washer/Flat Washer x 2
5MM Allen Wrench x 1
Flap Support Rod x 2
Rod End Cap and Flap End Cap x 2
M5 Flap Retainer and End Cap Bolt x 2
M5 Nylon Insert Hex Nut x 4
Flap Clamp / Matte Black Finish x 2
Mudflap (SS Trim Plate) x 2
M8 Flap Clamp Bolt/Flat Washer/Hex Nut x 10
Bolt Hole Punch x 1
Rock Tamers Trim Plate x 2
M6 Trim Plate Bolt/Spacer/Washer/Hex Nut x 16
Locking STAR PIN™ Wrench x 1
Instruction Manual x 1
*Sold as a KitWARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)
High Performance Waterproof Grease - 16oz Tub - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures:
Waterproof
Multi grease compatible
Excellent thermal / oxidative stability
Resists bleeding or melting at high temperatures
Suitable for sealed for life applications
Use in electrical applications that require grease
Workplace safe & environmentally friendly
Out performs competitive grease 5:1
Specifications:
Type: Grease
Box Dimensions: 4"H x 4"W x 4"L WT: 1.2 lbs
UPC: 770153250163
Brochure (pdf)
Saltwater Series Jack - 2500lb, Bolt-On, Flat Plate, Zinc 500+ HR Salt SprayThe Saltwater Series Trailer Jacks are designed for marine applications where exposure to saltwater and corrosive conditions is common. These jacks feature a 500-hour salt spray–rated zinc-plated coating that provides enhanced corrosion resistance compared to standard finishes.Like the Select Series, Saltwater Series jacks include a pivot pin sleeve for dependable pivot operation and an oversized textured handle design for improved grip and comfort during lifting. Designed specifically for saltwater use, this series offers reliable performance and extended service life for boat trailers regularly exposed to harsh marine environments.Features:
500-hour salt spray–rated zinc-plated coating for corrosion resistance
Designed for saltwater and marine environments
Pivot pin sleeve for reliable pivot operation
Oversized, textured handle for improved grip and comfort
Durable steel construction
Smooth, dependable manual lifting operation
Specifications:
Lift Capacity: 2500
Operation Method: Manual
Box Dimensions: 8"H x 12"W x 28"L WT: 22.3 lbs
UPC: 810123844166
Owner's Manual (pdf)
Stabilizer Jack Pads - Rubber - 6.2" x 6.2" *4-PackThe Camco recycled rubber stabilizer jack pads help prevent jacks and stabilizers from sinking into soft ground. The flexible material is great for use on uneven surfaces such as gravel, tree roots, and rough earth because it absorbs uneven pressure instead of cracking or wobbling. Recycled rubber stabilizer jack pads are UV resistant, weather-proof, and constructed of recycled materials. Nests perfectly with most stack jacks. Each pad measures 6.5" x 9" X .75". Set of 4.Features:
Helps prevent jacks and stabilizers from sinking into soft ground
Can be used on uneven surfaces such as gravel, tree roots, etc.
Compatible with Camco stabilizer jacks and plastic jack pads, the pad surface is 6.2” x 6.2”
Integrated handle for ease of use, included strap for storage
Constructed of recycled materials, UV resistant and weather-proof