Trailering

Elite Lock - Single - Receiver Lock - 5/8" - BlackThe Elite Lock from Secure Outdoors is designed to protect your investments, offering unmatched security for high-value accessories like trolling motors, shallow water anchors, and graphs. With these expensive pieces of equipment often costing thousands of dollars, the Elite Lock provides the peace of mind that your gear is safe from theft.The Elite Lock was designed to give you peace of mind when it comes to securing your equipment on and off the water. The robust, watertight, and low-profile design allows you to protect everything on your boat from graphs/plotters, trolling motors, and shallow water anchors. *Single = 1 Lock, Dual = 2 Locks

Read more less

Swivel Bracket KitGalvanized swivel top brackets provide vertical and tilting adjustments for trailer bunks.Swivel Brackets for mounting Bunk Boards to Bolster Brackets.Features: Bunk flange holes 3/8" dia. Bunk flange 1-3/8" x 3-1/2" Swivel flange hole 1/2" dia. Swivel flange 2" tall x 3-1/2" 2-1/2" bunk flange hole centers & 1 hole centered 10 gauge material *Sold as kit with (2) brackets, (2) 7/16" x 1" head cap screws, and (2) 7/16" nylon lock nuts.

Read more less

1-1/2" Wide Keel Base Roller Assembly f/2" - 2-1/2" TongueProduct DescriptionThis roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 4", black rubber spool roller and a galvanized steel bracket that attaches to your trailer's tongue. 2 to 2-1/2" trailer tongue.Features: Spool roller supports your boat's keel as it sits on the trailer Prevents the bow from making contact with your winch Eases loading and unloading of boat Helps to absorb road shock while boat is being trailered Bracket lets you bolt roller assembly onto the tongue or frame of your boat trailer Requires 7/16" fasteners (not included) Sturdy, 1/8" galvanized steel bracket resists corrosion Black rubber roller delivers long-lasting performance Made in USA Specifications: Roller length: 4" Shaft diameter: 5/8" Diameter of mounting holes (each): 7/16" Spacing of mounting holes: 3" apart on center Typically installed flat on the tongue of a boat trailer, this spool roller bracket assembly stabilizes the keel of the boat during trailering.

Read more less

Double Slot Swivel Bolster Bracket Assembly - 12"C.E. Smith's adjustable bracket is designed to support roller bunks. Hot dip galvanizing for years of use in the harsh marine environment. This bracket assembly uses bolster bracket-10102G and swivel bracket-10200G.Features: Bolster bracket: 12" bracket, 11 gauge material, 2-1/2" wide, slots 1/2" wide, swivel hole 1/2" dia., slots 4-3/4" Swivel bracket: 11 gauge material, bunk flange 1-3/8" x 3-1/2", bunk flange holes 3/8" dia., swivel flange 2" tall x 3-1/2", swivel flange hole 1/2" dia., hole centers 2-1/2" Overall assembly length is 12"

Read more less

Vertical 90° Bunk Bracket - 5" x 10" - Aluminum5” wide and 1/4” thick these heavy duty vertical bunk brackets are strong enough to mount large bunk boards to carry larger boats. Sold individually.

Read more less

Bow Roller - Black - 3" Diameter - 3-1/8"W - 1/2" IDBlack natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.Features: Black natural rubber 3" Diameter 3-1/8" wide 1/2" shaft

Read more less

Bolt-On Fender Step Pad - 3" Left Hand/Right HandThis fender step pad is ideal for the do-it-yourselfer. Step pad can be welded or bolted to your trailer fender. Step pad can also be bolted to your trailer frame with u-bolts. U-bolts NOT included.Features: Galvanized Finish 12 Gauge Steel 1-3/16"H x 3"W x 15-1/4"L Left Hand/Right hand

Read more less

60" Post Guide-On With Unlighted Posts These Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp.Features: Mounting hardware included Sold in pairs Adjusts out to 19" each side Fits frames up to 3" W x 4-1/4" H 1-1/2" square, 16 gauge pre-galvanized steel uprights 39" high 2-3/8" diameter white PVC posts. Stands 60" above the trailer frame with white post caps. Made in the USA Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized The galvanized coating is very thin (0.45 oz. on each side) WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quick-Release Transom Tie-Down Straps 2" x 4' PairWhen properly secured to transom eyes and trailer, transom straps reduce vertical and lateral movement to safely secure the boat to the trailer. They also reduce the bouncing of the boat on the trailer pads or rollers. Two inches wide for larger tailorable boats.Specifications: 2 inches wide 4 ft. long Webbing:  Strong webbing  Resists rot, oils, gasoline, and most chemicals Buckle:  Quick-Release (Over-Center) buckle  Strong and secure, yet easy to use  Quick tightening  Cinch tight and secure by depressing buckle handle Release by lifting the buckle handle Hook:  Vinyl-Coated S-Hook to prevent scratching boat or trailer finish  Corrosion resistant  Heavy-gauge Special Features:  Protective pad behind the buckle to prevent marring and scratches on gel coat and painted surfaces Hook-N-Loop closure secures the buckle handle in the locked position Specifications: Diameter (Inches): 2.00 Length (Feet): 4.00 Box Dimensions: 4"H x 6"W x 8"L WT: 1.75 lbs UPC: 022697152329 Quick Guide (pdf)

Read more less

2000 lb Dual Drive Winch - 2" x 20' Nylon StrapDual drive enhances the pulling capacity by distributing the load equally to two sets of gears. Eliminates frame torque. 2,000-lb. load capacity with 4.1:1 gear ratio. Features: Three-position pawl provides forward, neutral, and reverse operations  Black EDC finish. Molded, textured roller grip  Includes 2 in x 20 ft. nylon web strap with zinc-plated snap hook Specifications: Gear Ratio: 4:1:1 Manual/Electric: Manual Pull Strength (lbs): 2000 Box Dimensions: 5"H x 7"W x 8"L WT: 8.8 lbs UPC: 048903111959 Quick Guide (pdf)

Read more less

Submersible LED Low-Profile Trailer Light KitIdeal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards.Kit Includes: Includes (2) multi-functional (stop/tail/turn) submersible low-profile LED trailer lights  License plate bracket  Wiring harness and installation hardware Specifications: LED: Yes Box Dimensions: 4"H x 11"W x 11"L WT: 2.65 lbs UPC: 022697406477 Quick Guide (pdf)

Read more less

Heavy-Duty Winch Strap Replacement - Yellow - 3" x 25'A 3" x 25' wide Yellow Heavy Duty Replacement Winch Strap constructed with 10,000 lb. webbing and a 10,000 lb. drop forged snap hook.  For use on 3" wide winch strap drums. Specifications: Length (Feet): 25' Diameter (Inches): 3" Box Dimensions: 2"H x 6"W x 9"L WT: 2.4 lbs UPC: 082687862737

Read more less