Winterizing - Oil Change Systems

17820 Oil Changer SystemThe Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Box Dimensions: 8"H x 12"W x 12"L WT: 10.95 lbs UPC: 671880529624 Owner's Manual (pdf)

Read more less

Fluid Extractor - 7 LiterChange your oil through the dipstick tube and pump most any other fluid! For all types of motors, watercraft and vehicles.  Use a TRAC fluid extractor for oil changes and the removal of fuel, coolant and transmission fluid. Use it to pump out bilge water and trapped fluids. Perfect for any situation where draining is difficult. Self-priming pumps create a powerful vacuum to remove almost any non-corrosive liquid.  It’s an easier, cleaner way to drain engines with hard-to-reach drain plugs.Features: Tank-style pumps with two different sized extraction tubes. Clamp holds tubes for tidy storage.  No parts floating around to get lost. Self-Priming Ideal for nearly all forms of fluid extraction (not for corrosive fluids, such as acids) Includes cap, adapters and hoses Hose Sizes: Outer Diameter – 0.34 (11/32)” / Length – 6'; Outer Diameter – 0.2 (3/16)” / Length – 6'

Read more less

Drill Pump - 200 GPHIncorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.Features: 1/4" [6mm] Drill Shaft Flexible BUNA Impeller 8' [2.4m] Prime Uses: Oil Change and Liquid Transfers/LI> This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Engine Oil Changer Oil Drain PumpPolished brass hand pump connects directly to engine oil dipstick tube on many popular marine engines such as OMC and Mercruiser.Features: Screws onto threaded male 3/4" garden hose (GHT) fitting on top of dipstick tube. Gives simple "one-hand" pumping Complete with 2ft of 1/2" ID drain hose WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less