Winterizing

12oz Aerosol Can - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 12*Corrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 3"H x 3"W x 10"L WT: 11.4 lbs

Read more less

High Performance Waterproof Grease - 16oz Tub - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 6*Corrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 4"H x 4"W x 4"L WT: 7.2 lbs

Read more less

12oz Aerosol Can - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 2"H x 2"W x 10"L WT: 0.95 lbs UPC: 770153200120

Read more less

Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the  port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010626

Read more less

Glasstec - 32ozProtect your glass with Glasstec – a durable, hydrophobic coating that repels water and shields against salt, calcium, mineral buildup, and UV damage. Bonds at a molecular level for long-lasting protection. Covers up to 250 sq. ft. (3.2 oz.).Features: Performance: Provides up to one year of protection for the glass surface. Areas with mechanical wear (windshield wipers) will have a greatly reduced duration of protection. Glasstec creates a layer of hydrophobic protection that prevents salt, calcium, and other mineral deposits from bonding to the glass surface, making cleanups easier. 3.2 oz. - Glass coverage up to 400 sq. ft. (32 oz. - up to 4,200 sq. ft.) Appearance: Clear liquid Solubility: 100% in water pH: N/A Use & Application:For use on: Glass, plastic, fiberglass, ceramic, paint, glossy surfaces, hard or semi-hard surfaces.NOTE: Before applying, glass surface MUST be cleaned with DiTEC Crystal Clear, not a household glass cleaner. After Glasstec has been applied, then Crystal Clear or a household glass cleaner may be used for cleaning.Application: Apply using a microfiber applicator pad. Specifications: Type: Glass Box Dimensions: 3"H x 5"W x 7"L WT: 1.95 lbs UPC: 850019168075 Owner's Manual (pdf)

Read more less

TRITON 2.0 Teak & Wood Protectant - GallonTRITON 2.0 Teak Shield uses a new and improved nano-technology-based coating that is designed to protect teak and other wood surfaces from water, dirt, wine, UV rays, and more. Unlike a sealer, TRITON 2.0 marine teak protectant does not change the appearance, color, or feel of the surface being treated and can preserve your teak or wood surface for up to 6 months.Performance/Protection: Covered teak areas (bridges, living areas): 4-6 monthsUncovered areas exposed to full sun: 2-4 monthsTriton will naturally keep decks cooler compared to those that have oils applied to them.Features: One quart treats up to 150 ft2 (14.25 m2) One gallon treats up to 600 ft2 (57 m2) Not DOT regulated; offers low transportation cost Low consumption rate, cost-effective Appearance: Clear liquid Solubility: Not water-soluble A breathable alternative to teak sealer and teak oil Effective for decking, outdoor furniture, and more pH: N/A Use & Application:Only two coats need to be applied to the surface. Applying more than two coats during initial application will not enhance protection and may cause a blotchy/bleeding look on the surface.For use on: Teak, uncoated wood surfaces or porous stone.Application: Apply with a foam roller, foam brush or pump sprayer to a thoroughly cleaned wood surface (DiTEC Teak Clean recommended). Specifications: Type: Teak Box Dimensions: 4"H x 7"W x 12"L WT: 6.7 lbs UPC: 850019168143 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Folding Pedestal Boat Seat Cover - Vinyl WhiteKeep your seats and consoles from cracking and fading! Boat seat and consolecovers are designed to protect your seats from damaging ultra-violet rays,wind, mildew and water. All Covers fold easily for storage and keep yourseats cool and clean!Dimensions: 14"H x 18"W x 20"DFeatures: Mildew and water repellant UV Protection Waterproof Air vents Heavy duty Drawstring hem Specifications: Color: White Cover Type: Seat Box Dimensions: 3"H x 10"W x 14"L WT: 1 lbs UPC: 040011114822

Read more less

Aluminum Support Pole with Snap-On End 24" to 45-1/2"Features: Telescoping boat cover pole with cam-lock design Helps prevent water stains and damage to boat Available in two telescoping ranges: 24 to 45-1/2 inches and 30 to 57-1/2 inches Finish: Satin Anodized Telescoping Range: 24 to 45-1/2 inches 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Aluminum Box Dimensions: 1"H x 2"W x 25"L WT: 0.65 lbs UPC: 630838026653

Read more less

Universal Boat Hook A multi-purpose tool for boaters, aiding in dock line retrieval, recovering overoard items and as a push pole for safer docking. *Pole sold separately.Features: Made of strong UV resistant polycarbonate Uni-Snap quick release adapter snaps onto the Perfect Pole telescoping or Fixed Length handle *Sold as an Individual  Specifications: Type: Tools & Accessories Box Dimensions: 1"H x 4"W x 9"L WT: 0.25 lbs UPC: 633590666501 Brochure (pdf)

Read more less

Salt Off - Concentrate- Salt Remover Wash & Engine Flush - 1 GallonExperience the power of Star brite Salt Off Concentrate, a specially formulated solution designed to effectively remove salt deposits from metal, fiberglass, plastic, or painted surfaces. This concentrate bonds to the treated surface, preventing future deposits and ensuring long-lasting protection. Ideal for use on boats, vehicles, trailers, marine parts, engines, fishing and dive gear, and more, it doesn't etch, stain, or damage surfaces. It's perfect for removing saltwater deposits from boats and fishing gear, and for protecting cars or trailers from road salt damage. When used with the Salt Off Applicator, it flushes deposits from marine engines used in saltwater, ensuring maximum performance and service life. For exterior marine surfaces, trailers, dive gear, fishing rods & reels, simply fill the dispenser cup from the Salt Off applicator, saturate all surfaces, let it soak, rinse with fresh water, and let it air dry. It's your ultimate solution for salt deposit removal and prevention.Features: ULTIMATE SALT ELIMINATION: STAR BRITE Salt Off Concentrate effectively removes salt deposits from all surfaces, including fiberglass, vinyl, painted surfaces, metal, chrome, magnesium, plastic, wood, glass, and rubber ENGINE PERFORMANCE ENHANCER: Use Salt Off Concentrate as a marine engine flush to remove salt deposits from the cooling system, ensuring maximum performance and service life PROTECTIVE POLYMER LAYER: Our unique formula contains special polymers that bond to the treated surface, preventing future salt deposits and extending the lifespan of your gear EASY TO USE: Simply spray Salt Off Concentrate onto the surface to be treated, let it soak, and rinse with fresh water. For stubborn deposits, a light brushing may be required ROAD SALT DAMAGE PREVENTION: Ideal for protecting cars, trucks or trailers from the damage caused by exposure to road salt, keeping your vehicles looking their best CONVENIENT PACKAGING: Available in ready-to-use 22-ounce spray bottles as well as in concentrated form, in 32-ounce and 1-gallon containers Directions:Spray Salt Off on surface to be treated. Let application soak into salt for 10-30 minutes. Heavy salt build up may require scrubbing with a brush. Rinse and let air dry. Use Star brite Salt Off Concentrate (available in 32 fl. oz. – #93932 and Gallon sizes – #93900) to refill this bottle. Add 1 fl. oz. of concentrate to empty bottle and fill remainder of bottle with fresh water.

Read more less

Small Center Console Cover - Rip/Stop Polyester NavyKeep your seats and consoles from cracking and fading! Boat seat and console covers are designed to protect your seats from damaging ultra-violet rays, wind, mildew and water. 600 denier Rip/Stop Polyester with polyurethane coating. All Covers fold easily for storage and keep your seats cool and clean!Dimensions: 42"H x 36"W x 24"DFeatures: Breathable Mildew and water resistant UV Protection Heavy duty Polyureathane coating Air vents Specifications: Color: Blue Cover Type: Console Box Dimensions: 4"H x 10"W x 14"L WT: 3.8 lbs UPC: 040011090317

Read more less

Oil Change Bucket Kit - With Gear PumpGear Pump Oil Change Bucket 12VFeatures:  Reliable, well designed & proven gear pump technology For marine or industrial applications Portable & convenient High temperature resistant dipstick tube Heavy-duty alligator clips easily clamp directly onto battery Use the easy pour spout to empty used oil in recycling container 12 Volt 1 Year Warranty Kit includes: Pail Sealed Lid Pump Assembly Dipstick tube Heavy Duty Alligator Clips Easy Pour Spout

Read more less