Search results for "dometic sealand t series waste discharge pump"

VersiJet 4 Chamber Diaphragm Pump - 24V, 3.5 GPM, 50 PSIFlojet VersiJet Series industrial diaphragm pump. It is engineered for durability and longevity. This Flojet pump is perfect for applications such as liquid transfer, spraying, cooling, circulation, filtration, dispensing, and more! Glass-filled polypropylene hose is resistant to corrosion. Viton seals and a Santoprene diaphragm provide resistance to chemicals and corrosion. It has quick-connect ports and includes two 1/2" straight hose barbs.Features: Heavy-duty, coated motor Long-life co-molded diaphragm Efficient, quiet operation Self-priming Runs dry without damage 4-chamber diaphragm Quick-connect ports TENV permanent magnet motor Noise-dampening baseplate Thermal motor protection (TCO) Applications: Liquid Transfer Spraying Cooling Circulation Filtration Dispensing Specifications: Product Number: Q352F-16N7-2P Port Fittings: 2 x 1/2" (13mm) straight hose barb Open Flow Rate: 3.5 GPM open flow (13.2 LPM) Pressure Switch Cut-Off: No switch Max Operating Pressure: 50 PSI (3.4 BAR) Max Inlet Pressure: 30 PSI (2.2 BAR) Internal Bypass: Yes Fluid Temperature Range: 32° F - 140° F (0° C - 60° C) Self-Priming Capability: Up to 8ft (2.4m) dry prime Run-Dry Capable: Yes Nominal Voltage: 24 VAC Max Current Draw: 5.3 Amps @ 50 PSI (3.4 BAR) Fuse Size: 7 Amps (not included) Duty Cycle: Intermittent Leads: 12" (305mm), 14 AWG (2.5mm^2) Wire Connection: Stripped wire Weight (pump only): 5.1 lbs. Materials: Upper Housing: Glass-filled polypropylene Lower Housing: Cast aluminum Check Valve Retainer: Polypropylene Diaphragm: Santoprene Check Valves: Viton Switch diaphragm: Viton Bypass Diaphragm: Viton PH Seals: Viton PH Fasteners: Stainless steel Baseplate: Nylon with Rubber Feet Motor Casing: Cast aluminum; coated steel

Read more less

Rule 3700Non-Automatic 24vHeavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2" (38mm) discharge outlet.WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 3700 GPH Operation: Non-Automatic Outlet Size: 1-1/2" Volts: 24v Type: Electric Box Dimensions: 7"H x 8"W x 11"L WT: 5.9 lbs UPC: 042237083517 Owner's Manual (pdf)

Read more less

PH Superflush Toilet with Soft-Close LidThe newest generation of PHII - The PH pump used on the PH Superflush is a design that is timeless. The dual action pump is 66% larger in diameter than any competitive toilet on the market. Because the housing is larger it more easily moves more water in and out of the bowl meaning you spend less time pumping and more time enjoying your time on the water. If water usage is a concern the intake water can easily be turned off and the unit can still be pumped to allow flushing with virtually no water being used. A newly designed base enables this unique manual/electric toilet to easily install in installations where the builder has chosen only a mass produced manual toilet. In addition to the larger housing, the pump also boasts a full size joker valve which helps to prevent clogs and improves the flushing action. A lever handle rather than a T-grip allows all users to flush the toilet with incredible ease! Being able to flush the toilet without adding water has many benefits including the ability to empty out the bowl while in heavy seas. Each unit comes with a slow close seat that include stops on the underside of the seat to help prevent the seat from shifting while in use in heavy seas. Benefits Include: Effortless pumping! Powerful telescopic lever style handle makes pumping a breeze, even in the most challenging plumbing installations Superior strength! Our engineered polymer pump construction is the strongest on the market No more slamming seats! Soft close seat prevents annoying seat slamming and includes a unique feature that locks the seat in place while boat is rocking All units have a dry flush option and may be mounted above or below the waterline Specifications: Maximum Lift: 4' (1.2M) Maximum Discharge Loop Height: 15' (4.6M) Inlet Port Size: 3/4" Discharge Port Size: 1-1/2" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Size: Compact Size Color: White Inlet Size: 3/4" Outlet Size: 1-1/2" Rinse Water: RAW Suction Lift (ft.): 4' Type: Toilet Box Dimensions: 16"H x 23"W x 24"L WT: 31.6 lbs UPC: 085462040184 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Ultima Bilge PumpUltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve.The Ultima Bilge pumps may be manually operated via the Johnson Pump bilgecontrol panel.CE-ApprovedFeatures: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH Capacity straight (13.6 V): 64 l/min - 1000 GPH Amperage: 3.2 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz. Specifications: Gallons Per Hour: 1000 GPH Operation: Automatic Outlet Size: 3/4" Volts: 12v Type: Electric Box Dimensions: 4"H x 5"W x 6"L WT: 1.36 lbs UPC: 729321472609 Owner's Manual (pdf)

Read more less

500 GPH Standard Bilge Pump Kit with Float Switch - 12VFeatures: Completely submersible 500 GPH/1893 LPH Ignition protected Mercury-Free Switch Stainless Steel Shaft High Abrasion, Tin Coated Silicone Blocked Wire Includes Back Flow Preventer 3-Year Warranty Specifications: Type: Electric Gallons Per Hour: 500 GPH Operation: Automatic Volts: 12v Box Dimensions: 3"H x 8"W x 9"L WT: 1.2 lbs UPC: 042237106513

Read more less

1100GPH Standard Bilge Pump - 12VCustomers talk about flow, they want the water out of the bilge, andfast. Improved design and performance means that our next generation 1100GPH pump will produce this flow at just 24V rather than 27.2V as previously required...more typical of on board voltage supply.Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting startedFeatures: Non-automatic - used with a panel switch or Rule float switch Submersible and Ignition Protected High efficiency, low amp motor Stainless-steel shaft Includes backflow preventer WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Electric Gallons Per Hour: 1100 GPH Operation: Non-Automatic Outlet Size: 3/4" Volts: 24v Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 042237104762 Brochure (pdf)

Read more less

AquaT Marine Manual ToiletThe fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.The AquaT toilet will give you years of trouble free operation. The manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service.It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.CE-approvedFeatures Whisper quiet operation Self-priming pump Clean lines - pleasing to the eye Hygienic, easy-to-clean vitreous china bowl and exterior surfaces Robust wooden seat with durable baked enamel finish Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity Versatile plumbing connection options Automatic back-flow prevention Available in comfort or compact bowl sizes Designed for virtually any onboard mounting position May be installed above or below the waterline Suitable for OEM or replacement installation Corrosion resistant materials throughout Long service life Ergonomic pump handle for ease of use Pump can be mounted left or right of the toilet bowl Innovative brake bushing prevents annoying leakage at the handle Specifications: Color: White Inlet Size: 3/4" Operation Method: Manual Outlet Size: 1-1/2" or 1" Volts: 12v Type: Toilet Box Dimensions: 16"H x 17"W x 19"L WT: 27.5 lbs UPC: 7330717009779 Owner's Manual (pdf)

Read more less

Premium Utility Pump - 12 VDC, 1.5 GPMIncorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.Features: 12 VDC Ignition Protected BUNA Valves CE 7' [2.1m] Prime 8' Cable with Battery Clips Hose kit Included Uses: Winterizing, Oil Change and Liquid Transfers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Gallons Per Minute: 1.5 GPM Box Dimensions: 5"H x 6"W x 11"L WT: 4.65 lbs UPC: 752324009206

Read more less

AQUA KING™ II Standard Fresh Water Pump - 12 VDC, 3.0 GPMSHURFLO's 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water automatic demand pump is quiet, thermally protected and can run dry without damage.Features: 3901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor 4 Independent Chambers Built-In Check Valve Co-Molded Diaphragm Adjustable Switch Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 55 Gallons Per Minute: 3 GPM Box Dimensions: 5"H x 6"W x 11"L WT: 4.9 lbs UPC: 752324012381

Read more less

Water Puppy (US)Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps Simple design means fewer wearing parts ISO 8846 MARINE (Ignition protection) ISO 8849 MARINE (Bilge pump standard) Flow rate: 23.8 Litres/min (6.3 USgallons/min) Self-priming from dry up to 1.2m (4ft) Body: Bronze Impeller: Neoprene Seal: Lip type Voltage: 12 Vdc Amp Draw: 8 amp Fuse Size: 15 amp Motor: Permanent magnet type, fully enclosed, stainless steel shaft. Adapter for 3/4" External Garden Hose Thread included Weight: 4-1/2 lb WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 378 GPH Gallons Per Minute: 6.3 GPM Outlet Size: 1" Volts: 12v Type: Electric Box Dimensions: 4"H x 6"W x 10"L WT: 5.85 lbs UPC: 671880532112 Owner's Manual (pdf)

Read more less

Utility PumpThe 6050-Series pumps are the highest capacity, self-priming, portable Utility Pumps offered by Jabsco Bronze pump head 23 GPM output at 10ft total head Continuous duty motor with thermal over-load protection Motor wired to operate with 115v and can be converted to 230v Open drip proof motor 8' power cord with grounded plug convenient carrying handle WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 23 GPM Volts: 115v Box Dimensions: 12"H x 12"W x 13"L WT: 28.75 lbs UPC: 671880004374 Owner's Manual (pdf)

Read more less

HotShot HD5 Heavy Duty Washdown Pump Kit with 25' HoseCoil - 12V - 5GPM - 70PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (heavy-duty) models include a wider diameter motor with a powder-coated shell, cast aluminum endbells, and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy-duty, motors and cast aluminum lower housings which allow for long life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions are available which include a 25' (7.6m) HoseCoil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hose barb and GHT fittings 90° 20 mesh Quick Connect strainer Trigger nozzle & Quick Connect hose adapters

Read more less