Ballast King Bronze DC Pump with Deutsch Connector - No Reversing Switch - 15 GPM Wakeboard and Ski Boat Ballast PumpFeatures:
Flow rate: 15 US gallons/min (57 Litres/min)
Self-priming from dry up to 1.2m (4ft)
Adds approx 125lbs (56kgs) of ballast per minute
Reversible to both fill and empty tanks
Simple design means fewer wearing parts
ISO 8846 MARINE (Ignition protection)
Applications:The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty. Specifications:
Body Materials: Bronze
Impeller: Jabsco Neoprene compound
Seal: Lip Type
Port(s): 1/2" Internal Pipe Threads 1" External Hose Barb
Voltage: 12 (Vdc)
Amp Draw: 19 (amp)
Fuse Size: 25 (amp)
Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible
Duty Cycle: 30 Minutes Max
Dimensions: 3 5/8 x 8 x 4 3/4 (inches)
Brochure (pdf)
RV Macerator PumpDesigned to add flexibility to Holding Tank service. With the Flojet Waste Pump, you can not only empty the black and grey water tanks at the conventional Dump Station but also down a toilet, into your house sewer clean-out, septic tank, or into a mobile waste wagon.The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high-quality Jabsco design is found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump uphill, and around corners. The RV waste pump will simplify and improve your RV experience!Features:
A neat and clean way to quickly evacuate waste tanks
Empty black-water and greywater Holding Tanks at home
Grinds waste as it pumps
Built-in Impeller Protection Device...longer life!
The flow of up to 13 GPM for fast, clean Holding Tank evacuation
Easy to InstallBecause it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.Applications
Empty holding tanks and avoid dump stations
Transfer waste from recirculating toilets to main holding tank
Impeller Release FeatureAfter long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.Specifications:
Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
Impeller: "Jabsco Nitrile" compound
Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
Seal: Lip Type
Ports: Inlet RV model - 3" (76mm) hose
Outlet - 1" (19mm) Hose Barb
Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dryComplies with USCG Regulation 183.410 & ISO 8846 MARINE for Ignition ProtectionWeight: 3.5lb (1.6 kg) Approx.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)
Par-Max Shower Drain/General Purpose Pump - 3.5GPM-25psi-12VDC with StrainerLong-life fully serviceable shower drain pump.Features:
3.5 GPM (13.2 lpm) at 3ft (1m) head
Self-priming up to 10ft (3m) allows mounting above wet bilges
Diaphragm design allows extended dry running
Continuous rated, heavy duty motor sealed for harsh bilge environments
Thermal overload protection automatically stops the motor if it overheats due to overloading, with an auto re-start feature
Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection)
ISO 8849 MARINE (Bilge Pump Standard)
Complete with Pumpgard
Oil resistant elastomers
Fitting: Connections for 3/4" (19mm ) ID hose
Size: 7.7" long x 4.2" wide x 4.1" high (19.6cm x 10.6cm x 10cm)
Weight: 5.0lb (2.1kg)
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 3.5 GPM
Max PSI: 25
Volts: 12v
Box Dimensions: 5"H x 7"W x 13"L WT: 6.5 lbs
UPC: 671880595667
Owner's Manual (pdf)
Cartridge Bilge Pump 750GPH - 12VSubmersible bilge pump 12V with pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install.Features:
Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation
Replaceable cartridge motor
Easy maintenance and low power consumption
Specifications:
Including 19 mm (3/4″) straight and elbow detachable discharge ports
Amperage: 2,7 A
Fuse Size: 5A
For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length
Specifications:
Gallons Per Hour: 750 GPH
Gallons Per Minute: 12 GPM
Type: Electric
Volts: 12v
Operation: Non-Automatic
Outlet Size: 3/4"
Box Dimensions: 3"H x 4"W x 5"L WT: 0.92 lbs
UPC: 7340176600028
Marine Elegance™The Marine Elegance is the ultimate in electric marine toilets. Offering the luxury of a full size seat in a one piece china bowl developed with a unique mounting system. It offers a super small footprint at just 8 ½” x 9 ¾”. All toilets are now supplied with a slow close toilet seat that includes stops to help prevent the seat from shifting while in use during heavy seas. With the same Vortex-Vac technology also offered in the Atlantes Freedom, it creates a vacuum in the bowl, eliminating the need for extra vacuum generation equipment. Unlike typical vacuum toilet systems, a convenient, built-in shredder with stainless steel blades transforms waste into small particles to reduce clogs. The efficient action of the pump quickly and quietly pulls waste from the bowl with the ability to push the waste an amazing 10' vertically and 100' horizontally. Performing at a noise level less than 63 decibels it won’t alert everyone in the boat or on the dock that nature is calling. Benefits:
Low water usage
Small footprint for compact installation
One piece vitreous china bowl
Angled back for contoured fit
Quiet operation
Unmatched rinsing capabilities
Low water consumption
Built in shredder reduces clogs
Can pump 10ft vertically, or 100ft horizontally
Multi-Function Momentary Control:Provides momentary operation and independent momentary control of water and dischargeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Color: Bone
Gallons Per Minute: 3 GPM
Inlet Size: 3/4"
Operation Method: Electric
Outlet Size: 1-1/2"
Rinse Water: RAW
Suction Lift (ft.): 4'
Volts: 12v
Type: Toilet
Size: Household Size
Box Dimensions: 18"H x 22"W x 24"L WT: 55 lbs
UPC: 085462026225
Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
2000 GPH Non-Automatic Bilge Pump - 24VThe 2000 GPH Non-Automatic Bilge Pump is engineered for superior performance, durability, and ease of maintenance. Designed for marine applications, this high-capacity pump operates via a separate float or panel switch, providing complete user control. Its advanced anti-airlock technology, moisture-tight seals, and stainless-steel motor shaft ensure consistent operation even in the harshest marine conditions.Featuring a quick-connect design, the pump, base, and wiring can be replaced in seconds without disrupting plumbing connections. The robust impeller design, combined with its high-efficiency motor, delivers exceptional water evacuation while operating quietly with low energy draw. Dual-size straight and 90-degree outlet fittings provide flexibility for a variety of installation setups.Whether you’re upgrading or maintaining your bilge system, the CM-A31-2000B ensures reliable and hassle-free performance, meeting the highest safety and marine standards.Features:
Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing.
Powerful Water Evacuation: Delivers a high flow rate of 2000 GPH, efficiently clearing large volumes of water to keep your bilge dry and safe in critical conditions.
Non-Automatic Operation: Requires a separate float switch or manual panel switch, giving boat owners full control over when the pump activates.
Anti-Airlock Technology: The advanced impeller design prevents airlocks, ensuring smooth and uninterrupted operation in any marine environment.
Dual Outlet Compatibility: Includes both straight and 90-degree fittings for 1-1/8 inch hoses, offering flexibility for various plumbing configurations.
Marine-Grade Durability: Features a high-efficiency motor with a stainless-steel shaft, exclusive moisture-tight seals, and marine-grade blocked wiring for long-lasting reliability.
Meets Safety Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safe marine operation.
Quiet and Energy-Efficient Operation: The high-efficiency motor operates quietly with a low amp draw, minimizing power consumption without sacrificing performance.
4-Year Warranty: Backed by Commodore’s 4-year warranty, ensuring dependable operation and peace of mind for marine enthusiasts.
Specifications:
Voltage: 24V
Flow Rate: 2000 GPH (Gallons Per Hour)
Outlet Diameter: 1-1/8 inch (29mm)
Current: 7.5A (12V) / 4.0A (24V)
Head: 18.04 ft (5.5m)
Unit Weight: 1.71 lbs (0.78 kg)
Included Components:
Dual-size straight fitting (1-1/8 inch)
Optional 90-degree angled fitting (1-1/8 inch)
Quick-connect wiring for hassle-free setup
Specifications:
Gallons Per Hour: 2000 GPH
Operation: Non-Automatic
Outlet Size: 3/4" or 1-1/8"
Type: Electric
Volts: 24v
Box Dimensions: 4"H x 6"W x 6"L WT: 1.93 lbs
UPC: 817683023239
Brochure (pdf)
Sea Era QC Marine Size Pressurized Freshwater Toilet with Multifunction Panel - White - 12VThis robust little electric marine toilet is the perfect fit for someone looking for a reliable macerator as a step up from a manual toilet. The base is able to rotate 90 degrees, allowing it to fit nicely in spots where a manual toilet had been installed. The SeaEra QC differentiates itself from the original SeaEra by offering the installation option of either pressurized freshwater with a solenoid valve that is built into the base or with a remote intake pump for outside raw water.Features:
Powerful flushing action with advanced design features
An excellent replacement for less durable non-Raritan units
Low water usage (as little as 1 quart (1 liter))
The bowl can be rotated 90 degrees for mounting in confined spaces
Full-size joker valve reduces clogs
Stainless steel macerating blade
Household or marine-size bowls are available
Self-priming inlet pump can be run dry
Separation of intake and discharge means dirty water cannot enter the bowl if the seal fails
Two-year warranty
Both 90-degree and straight discharge included
Filterless Bilge/Sink/Shower Drain Pump - 4.2 GPM - 24VSelf-priming diaphragm pump 24V DC.Features:
Connections: - for 19mm (¾”) bore hose.
Dimensions: - 294 mm long, 159mm wide, 132mm high
Fuse Size: - 5(amp)
Maximum Current: - 2.5(amps)
Output - up to 16 litres/minute (3.5 gallons/minute). Maximum recommended total head 6m
Robust, quiet single diaphragm design
No strainer required
Single diaphragm design allows extended dry running
Self-primes up to 3m (9.5ft) vertical lift
Multi-positional ports for easy mounting
Rated for up to 30 minutes of continuous running
Actual Weight: 2.98 Kg (Approx. 3.48 Kg packed)
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 4.2 GPM
Inlet Size: 3/4"
Operation Method: Electric
Operation: Non-Automatic
Outlet Size: 3/4"
Rinse Water: Raw/Fresh
Suction Lift (ft.): 9.5'
Type: Electric
Volts: 24v
Box Dimensions: 6"H x 7"W x 14"L WT: 6.95 lbs
UPC: 671880581578
Rule 3700 GPH Non-Automatic Bilge Pump with 6' WireHeavy-duty construction for both commercial and pleasure boat use; known for trouble-free operation and reliability. 1-1/2" (38mm) discharge outlet. 12 Volts DC unless noted.Features:
Fully Submersible
Easy-clean snap-lock strainer
Silent and vibrationless operation
Anti-airlock protection
Compact, efficient long-life motor
Ignition protected
No burnout when run dry
Rust and Corrosion protection
Used by leading boatbuilders worldwide
With 6' wire
PIRANHA™ Ballast 800 Pump - 12 VDC, 800 GPHEverything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge for easy cleaning and ease of replacement.Features:
Flow Rate 800 GPH
Replaceable Cartridge
Tough Nylon Construction
Anti-Air Lock Feature
Tinned 6 Feet Wire Assembly
CE, Ignition Protected ISO 8846
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Volts: 12v
Gallons Per Minute: 800 GPH
Box Dimensions: 4"H x 6"W x 8"L WT: 1.18 lbs
UPC: 752324011902
PIRANHA™ Straight Port Aerator 800 Livewell Pump - 12 VDC, 800 GPHSmart. Reliable. Attractive. Efficient. Our tough density nylon housing and heavy duty water cooled motor give the SHURFLO livewell pumps unparalleled reliability. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown connections. These aerator pumps have a removable cartridge for easy cleaning.Features:
Submersible
Anti-Airlock
Removable Cartridge
High Density Nylon Housing
Heavy Duty Water Cooled Motor
Tinned 6' Wire Assembly
Includes Hex Nut & Washer
Ignition Protected
ISO 8846
2 Year Warranty
CE Listed
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Volts: 12v
Gallons Per Hour: 800 GPH
Box Dimensions: 4"H x 6"W x 12"L WT: 1.4 lbs
UPC: 752324006977
AQUA KING™ II Junior Fresh Water Pump - 12 VDC, 2.0 GPMSHURFLO's 4128 fresh water pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump, the 4128 pump is constructed for smooth flow. The 4128 fresh water automatic demand pump is quiet, thermally protected and can run dry without damage.Features:
2901 Replacement
Sealed Switch
Sealed Motor
Corrosion Resistant Electro Coated Motor
4 Independent Chambers
Built-In Check Valve
Co-Molded Diaphragm
Adjustable Switch
Self-Priming up to 6 Feet
Dry Run Capability
Thermally Protected
Ignition Protected, CE
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Volts: 12v
Max PSI: 30
Gallons Per Minute: 2 GPM
Box Dimensions: 5"H x 6"W x 11"L WT: 4.92 lbs
UPC: 752324012374