Heavy Duty RV Water Pump with Strainer - 12V - 4GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
4 GPM (15 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Grey Waste Tank - 8 Liter - 2.1 Gallons - 1 SensorThis tank has a unique ‘triple seal’ lid that isolates electronics from the harsh grey waste environment for advanced durability.Features:
Integrated sensors for automatic pump control; a solid-state switch protected against water ingress
Easy wiring - connect any 12V or 24V DC pump system (up to 20 amps with no relay required)
Ports shaped for drilling accuracy (8-liter and 20-liter tanks only)
Double switch models - the second sensor can be wired to a high-level alarm or second pump
Pumps can be top- or side-mounted on a 20-liter tank
Specifications:
Capacity: 8 liters (2.1 gallons)
No. of Sensors: 1
Electrical Connections: Tinned wire ends
Inlet Hose Connections: 19mm (¾") x 2, 25mm (1") x 3, 38mm (1½") x 3
Outlet Hose Connections: 19mm (¾") x 1, 25mm (1") x 1
Materials: Tank: MDPE, Seals: EPDM/Neoprene, Monprene®, Lid: Glass-filled Polypropylene, ABS, Polyurethane
Service Kits (Lid & Sensor Array): AK1005
Quick Guide (pdf)
Aqua Void Automatic 800 GPH Bilge Pump - 12VWith its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.Experience the Industry-First Quick-Change Motor ConnectionJohnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.Take Control of the Boating Experience with Unparalleled ConvenienceThe Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.Enjoy Enhanced Efficiency and Higher Flow RatePowered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.Trust in Reliable Performance Under Demanding ConditionsJohnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!Features:
High-flow impeller design
Quick-change motor connection
Switchless automatic bilge pump with low-amp resistance monitoring
Durable thermoplastic housing design commonality with removable motor cartridge
Smaller profile than pumps with switches
Straight or 90-degree dura port discharge ports with an included check valve
Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings
Clip-in basket
Benefits:
Heightened efficiency and an increased flow rate
Enjoy quick and hassle-free cartridge motor changes or capacity upgrades
Automatically monitors the presence of water through low-amp draw impeller spin
The common body allows interchangeable motor cartridge replacement to the same or different size
For tighter fit in smaller spaces
Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow
Corrosion-resistant and extended life
Competitive Advantages:
The most efficient and highest flow in the GPH capacity category
Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires
100 days of service before critical battery draw down*
Automatically monitors the presence of water through low-amp draw impeller spin
Ease of installation & maintenance
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TINNED
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
Specifications:
Gallons Per Hour: 800 GPH
Operation: Automatic
Outlet Size: 3/4"
Type: Electric
Volts: 12v
Box Dimensions: 4"H x 4"W x 5"L WT: 1.15 lbs
UPC: 7330717018191
Quick Guide (pdf)
JABSCO 12V Marine Electric Toilet Motor37064-0000Replacement motor for 37010 Series Marine Electric Toilet Household size bowl complements the luxury of electric flushing with a choice of compact bowl where space is a premium. Self-priming flush pump rinses bowl as macerator and high capacity scavenger pump grinds up waste. Inlet is 3/4". Outlet is 1". 12 volts DC.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Inlet Size: 3/4"
Outlet Size: 1"
Volts: 12v
Type: Misc
Box Dimensions: 5"H x 9"W x 9"L WT: 5 lbs
UPC: 671880032902
IC Retail Kit 12V Gulper IC Pump & Strainer ICAt the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance.Features & Benefits
Save time and money by reducing four separate components to one pre-wired system. Remote mounting automatic Gulper IC receives signals from Strainer IC and switches on and off automatically
Pre-wired and assembled - just connect power
Remote mounted pump for easy inspection- high,dry and protected
Soft start - protects the pump for long life
Small footprint strainer fits into very confined bilge spaces
Low current controlled switching - no switch failure from high currents
On/off delay - prevents cycling
Environmentally friendly - no mercury
Time delay to allow for optimum drainage
Override wire included to allow for manual activation
Non-choke valves - no filter to block/clean
Long life - pump self primes and runs dry without damage
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Electric
Volts: 12v
Box Dimensions: 7"H x 8"W x 12"L WT: 5.06 lbs
UPC: 766478945693
Automatic Bilge Pump 750 GPH - 12VFully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 1m head. Stainless steel shaft, compact and easy to install.Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode.Features:
Automatic Submersible
Includes 19 mm (3/4″) straight and elbow detachable discharge ports
For pleasure boats from 6m (18 Ft) to 8m (25 Ft) length
Specifications:
Weight: 0.45 kg/1 lb
Dimensions: 151/6L x 95/3.75H x 78/3W mm/in
Fuse: 2,7A
*CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications:
Type: Electric
Gallons Per Hour: 750 GPH
Gallons Per Minute: 12 GPM
Operation: Non-Automatic
Outlet Size: 1-1/4" or 1-1/2"
Volts: 12v
Box Dimensions: 4"H x 5"W x 7"L WT: 1.3 lbs
UPC: 7340176600158
Hydraulic Power UnitA compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump, solenoid valves, reservoir and cover.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)
1100 GPH 60 Series Automatic Bilge Pump - 12VThe 1100 GPH 60-Series Automatic Bilge Pump is the ultimate all-in-one solution for boat owners seeking powerful, reliable, and efficient water removal. Featuring a built-in float switch, this automatic bilge pump eliminates the need for additional components, activating only when water levels rise and shutting off when the bilge is clear. Designed to withstand harsh marine environments, it comes equipped with a high-torque motor, advanced seals, and an anti-fouling impeller for superior longevity and performance.Maintenance is simplified with a snap-off strainer base for easy cleaning and a quick-connect wiring system, allowing the motor cartridge to be replaced in seconds. Built to meet ISO 8846 and ISO 8849 standards, the 1100 GPH bilge pump is fully submersible and ignition-protected, providing unmatched safety and reliability on the water.Features:
All-in-One Automatic Design: The Integrated float switch detects rising water levels and automatically activates the pump, shutting off when the bilge is clear. No separate float switch is needed, simplifying installation.
Powerful and Reliable Performance: With a flow rate of 1100 GPH and a high-torque motor, this pump ensures fast and efficient water evacuation, keeping your bilge dry and safe.
Anti-Fouling Impeller and Debris Protection: The advanced impeller design resists fouling, while the snap-off strainer base protects the impeller and float switch from debris, ensuring smooth operation.
Quick-Connect Motor Cartridge: Replace the motor in seconds without the need to remove the base or plumbing. This user-friendly feature simplifies maintenance and minimizes downtime.
Oil-Resistant Activation: Will not activate in the presence of straight motor oil, ensuring accurate water detection and preventing unnecessary operation.
Meets Marine Safety Standards: Fully submersible and ignition protected, this pump meets or exceeds ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for safety and performance.
Compact and Lightweight Design: With dimensions of 6.14 x 3.62 x 4.57 inches and a weight of only 1.33 lbs (0.6 kg), this pump is easy to install and fits in tight bilge spaces.
4-Year Warranty: Backed by Commodore's industry-leading 4-year warranty, providing peace of mind and reliable operation.
Specifications:
Voltage: 12V
Flow Rate: 1100 GPH (Gallons Per Hour)
Outlet Diameter: 1-1/8 inch (29mm)
Current: 3.0A (Max Draw: 6.0A)
Wire Lead: 3 feet (1 meter), 18 AWG
Weight: 1.02 lbs (0.47 kg)
Why Choose the Commodore 1100 GPH Automatic Bilge Pump?The Commodore 1100 GPH Bilge Pump is a premium solution for boat owners seeking reliable automatic bilge management. With its all-in-one design, built-in float switch, and superior debris protection, this pump guarantees efficient and hassle-free operation. Its robust construction, ease of maintenance, and compliance with marine safety standards make it the perfect companion for any watercraft. Specifications:
Gallons Per Hour: 1100 GPH
Operation: Automatic
Outlet Size: 1-1/8"
Type: Electric
Volts: 12v
Box Dimensions: 4"H x 5"W x 6"L WT: 1.31 lbs
UPC: 817683023079
Brochure (pdf)
RV Water Pump with Strainer - 12V - 3GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
3 GPM (11 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
ID20 High-Speed Inflator/Deflator 12V Portable Pump with Multiple Valve OptionsThe iD20 Hi-Speed Inflator provides reliability and flexibility, allowing for rapid inflation and deflation of almost all inflatables. Simple to operate and with a powerful 300W motor, this lightweight and portable air pump will ensure you waste no time getting your inflatable ready for use.With many valve options, you will be able to inflate/deflate almost any inflatable product with no effort and in no time at all.Features:
Inflates a four-man dinghy in less than two minutes
Deflates, removing every last ounce of air for easy storage
Adjustable nozzles for almost all inflatables and valve types
High flow and pressure pump design – 20 ft/min (550 l/min) @ 2.6 psi
12 Volts (Max current draw: 25 amps)
10 ft. cable length with battery clips
The air release valve protects from over-inflating and overheating
WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)
1" Electro-Magnetic Clutch PumpFlow rate: Nominal 23 US Gallons/min at 1750 RPMSelf-priming from dry up to 7.8ftFeatures:
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Inexpensive to buy and operate.
Will tolerate abrasive wear (this may affect performance - seek advice from your distributor).
Handles hard and soft solids without clogging.
Can pump in either direction.
Will not airlock.
APPLICATIONS MARINE:Engine cooling, Pumping bilges, Wash downs, Circulating water in bait tanks, Utility dockside pump.INDUSTRIAL:Circulating and transferring, Velocity mixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Tanning Liquors, Glycerin, Brine, etc.FARMING:Pumping water for stock, Pumping water from shallow wells and cisterns.PUBLIC UTILITIES AND MUNICIPALITIES:Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations, and truck installation under hood for emergency pumping.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Minute: 23 GPM
Volts: 12v
Box Dimensions: 8"H x 9"W x 14"L WT: 16.15 lbs
UPC: 671880007962
Owner's Manual (pdf)
PIRANHA™ Livewell 600 Pump - 12 VDC, 600 GPHSmart. Reliable. Attractive. Efficient. All PIRANHA series livewell pumps have a removable cartridge for easy cleaning. Anti-airlock feature allows the pump to clear trapped air in rough water or when the boat is anchored. The dual port fitting allows for easy washdown pump connections. Everything you are looking for in a livewell pump!Features:
Removable Cartridge
Tough Nylon Housing
Washdown Port Built-in
Anti-Airlock
Ignition Protected
ISO 8846
2 Year Warranty
CE Listed
Tinned 6' Wire Assembly
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Volts: 12v
Gallons Per Hour: 600 GPH
Box Dimensions: 4"H x 6"W x 8"L WT: 1.23 lbs
UPC: 752324007011